No. | Brand | I | A | t | c | w | Y | R | Q |
4'x8' | - | - | - | - | - | - | - | - | - |
30 | - | - | - | - | - | - | - | - | - |
(10 | - | - | - | - | - | - | - | - | - |
YZF1000R | NTN | - | - | - | - | - | - | - | - |
15X32X9 | - | - | - | - | - | - | - | - | - |
N21% | - | - | - | - | - | - | - | - | - |
2019 | - | - | - | - | - | - | - | - | - |
1000 | - | - | - | - | - | - | - | 0,8 mm | - |
10wheels | - | 65 mm | - | - | - | - | - | - | - |
PC220-7 | - | - | - | - | - | - | - | - | - |
6206ZE | Nachi | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
6026DDU | - | - | - | - | - | - | - | - | - |
17 | - | - | - | - | - | - | - | - | - |
23980B.MB1.H88 | fag | - | - | - | - | - | - | - | - |
NU219ECJ/C3 | - | - | - | - | - | - | - | - | - |
9 | - | - | - | - | - | - | - | - | - |
430 | NSK | - | - | - | - | - | - | - | - |
2x | - | - | - | - | - | - | - | - | - |
8x12x8 | - | - | - | - | - | - | - | - | - |
4WE10D33/OFCG24N9K4 | Rexroth | - | - | - | - | - | - | - | - |
0-0-50 | - | - | - | - | - | - | - | - | - |
5 | INA | - | - | - | - | - | - | - | - |
209K | FAFNIR | - | - | - | - | - | - | - | - |
22211E | - | - | - | - | - | - | - | - | - |
23144CAK/W33 Self Aligning Roller Bearing 220×370×120mm | Ab - Cage-Cone Frontface Clearance:3.81 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:36200 N; Cone Part Number:JP14049P; B - Cone Width:38.000 mm; G1 - Heat Generation Factor (Roller-Raceway):235.2; C - Cup Width:21.000 mm; e - ISO Factor8:0.5; Y - ISO Factor9:1.19; G2 - Heat Generation Factor (Rib-Roller End):44.8; Da - Cup Frontface Backing Diameter:189.99 mm; |
23222C/CK Self-aligning Roller Bearing 110*200*69.8mm | Bore Diameter (mm):20; Dynamic Load Rating (Cr):20,000; Bore Dia (d):20.0000; Weight (g):64.00; Inner Width (Bi):16.0000; Outer Diameter (mm):35; Outer Dia (D):35.0000; Max. shaft corner radius, or 45 deg. chamfer (ch1):0.300; Bearing number:GE20N; Outer Width (Bo):12.0000; |
23012C/CK Self-aligning Roller Bearing 60*95*26mm | Support Type:Take-Up; Dimension H:2.5 in; Cr - Dynamic Load Rating:164111 lbf; Cor - Static Load Rating:232453 lbf; Dimension D:19.3 in; Maximum Speed:1320 rpm; Dimension N:20.8 in; Series Type:Medium Series; Dimension Y:1.0 in; Note:This product line wa; |
230/950/W33 Self Aligning Roller Bearing 950×1360×300mm | Bore Diameter (mm):35; C:14 mm; Bearing number:BK354514; Outer Diameter (mm):45; Width (mm):14; D:45 mm; Fw:35 mm; Brand:ISO; Size (mm):35x45x14; |
Z-534176.PRL Bearing | ra (max):2.5 mm; Bore Type:Tapered Bore; Limiting Speed - Oil:2,600 rpm; Groove Width A:15 mm; Retainer Material:Pressed Steel; da (min):154 mm; Enclosure:Open; Limiting Speed - Grease:2,100 rpm; Hole Diameter (do):8 mm; Axial Load Factor Y0:1.95; |
23220CK Self Aligning Roller Bearing 100x180x60.3mm | d:500 mm; C:72 mm; Bearing number:NUP28/500; D:620 mm; Width (mm):72; Bore Diameter (mm):500; Size (mm):500x620x72; B:72 mm; Brand:ISO; Outer Diameter (mm):620; |
22217CK/W33 Self Aligning Roller Bearing 85X150X36mm | Basic static load rating (C0):81 kN; Fw:44,45 mm; C:25,4 mm; (Grease) Lubrication Speed:6400 r/min; Outer Diameter (mm):58,738; Weight:0,177 Kg; Bearing number:HJ-283716; Width (mm):25,4; Size (mm):44.45x58.738x25.4; D:58,738 mm; |
HMV25E Hydraulic Nut 125.5x192x38mm | Outer Diameter (mm):265; f2:0,8 mm; Bearing number:TUP2 260.120; θ:12 mm; D:265 mm; L:120 mm; Brand:CX; f1:1,6 mm; Bore Diameter (mm):260; d:260 mm; |
24036CK/W33 Self Aligning Roller Bearing 180×280×100mm | Weight:40,4 Kg; d1:265,3 mm; B:140 mm; Width (mm):140; Outer Diameter (mm):340; Angle:8 °; Bearing number:SA1-240; Brand:NTN; r1 min.:1,1 mm; d:240 mm; |
FAG 1317-M Bearings | m:19,9 kg / Weight; D:420 mm; T:64 mm; A:18 / Factor min. loa; Size (mm):340x420x64; C0a:1800000 N / Static l; Width (mm):64; rmin:2 mm; ra max:2 mm; Bearing number:51168-MP; |
23238CC Self Aligning Roller Bearing 190x340x120mm Video