| 22211 Self Aligning Roller Bearing 55X100X25mm | Number of Lubrication Holes:12; Width B:218.000 mm; Chamfer rsmin:6.00 mm; Thermal Speed Ratings - Oil:370 rpm; Bore d:460.000 mm; Weight:529.000 lb; Chamfer r1smin3:6.0 mm; Geometry Factor Cg2:0.3050; Backing Shaft Diameter ds:502.0 mm; Dimension S4:8.40 mm; |
| 1309ATN Self-aligning Ball Bearing 45x100x25mm | Angle:4 °; Brand:FBJ; Outer Diameter (mm):55; Bore Diameter (mm):35; D:55 mm; Width (mm):35; Size (mm):35x55x35; d:35 mm; d1:40 mm; B:35 mm; |
| HMV29E Hydraulic Nut 145.5x214x39mm | Bore Diameter (mm):42; C:14,288 mm; Calculation factor (Y0):0,68; db:46 mm; Da:67 mm; d:42 mm; da:51 mm; Db:72 mm; r min.:2 mm; B:17,384 mm; |
| 1215K Self Aligning Ball Bearing | Outer Diameter (mm):37; Ew:37 mm; B:16 mm; Fw:30 mm; Width (mm):16; Bearing number:KZK30X37X16; Bore Diameter (mm):30; Size (mm):30x37x16; Brand:ISO; |
| 24126/W33 Self Aligning Roller Bearing 130x210x80mm | Basic static load rating (C0):202 kN; r min.:1,1 mm; Oil lub.:2700; Da(max):68; D:95 mm; Basic dynamic load rating (C):96,6 kN; Da max.:68 mm; (Refer.)Mass(kg):1.01; Outer Diameter (mm):95; D1(min):52; |
| H307 Bearing Adapter Sleeve 30*35*52mm | Thread (TH):M27×2,0; d:28 mm; W:35 mm; F:110 mm; S:47 mm; O:36,8 mm; Bearing number:HRT28; N:44 mm; C:15 mm; Angle:14 °; |
| 11206-TVH Wide Inner Ring Type Self-Aligning Ball Bearing 30x62x48mm | Fatigue limit load, Cu:11.8 kN; d1:75 mm; (Oil) Lubrication Speed:5 000 r/min; Characteristic rolling element frequency, BSF:7.3 Hz; T:21 mm; Y0:0.93; Mass:0.58 kg; Manufacturer Name:NTN; Db:92 mm; Da:89 mm; |
| 29415 Thrust Roller Bearings 75X160X51MM | a:5 mm; s:34,1 mm; Brand:SNR; B:85,7 mm; e:2 mm; d:70 mm; Thread (G):M10x1,25; m:8,5 mm; H1:9 mm; Bearing number:EX214; |
| 1307 EKTN9/C3 Bearing 35x80x21mm | Size (mm):100x45x36; Bearing number:NJ 2309 ECML; da - max.:56 mm; Fatigue load limit Pu:20 kN; F:58.5 mm; da max.:56 mm; Fatigue load limit - Pu:20 kN; Calculation factor kr:0.38; Basic static load rating C0:153 kN; Bore Diameter (mm):100; |
| 2314M Self-aligning Ball Bearing 70x150x51mm | ra max.:1.0 mm; da min.:57 mm; d:50 mm; Size (mm):50x90x20; Basic static load rating (C0):23,2 kN; r min.:1.1 mm; Outer Diameter (mm):90; Da max.:83 mm; (Grease) Lubrication Speed:7000 r/min; Brand:NACHI; |