| No. | Brand | I | A | t | c | w | Y | R | Q |
| 12/15/18/21mm | - | - | - | - | - | - | - | - | - |
| 1220 | - | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| S52LW | RBC | - | - | - | - | - | - | - | - |
| N213 | - | - | - | - | - | - | - | - | - |
| 145PSI | Parker | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | 68.262 mm | - | - | - | - | - | - |
| 17mm | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 280 | Rexroth | - | - | - | - | - | - | - | - |
| 10t | - | - | - | - | - | - | - | - | - |
| KZ750 | - | - | - | - | - | - | - | 7,1 mm | - |
| A2fe45 | Rexroth | - | - | - | - | - | - | - | - |
| 6CT | - | - | - | - | - | - | - | - | - |
| 510062 | Timken | - | - | - | - | - | - | - | - |
| 7015CDGA/P4A | SKF | - | - | - | - | - | - | - | - |
| 37-14 | - | - | - | - | - | - | - | - | - |
| TAT21139 | John Deere | - | - | - | - | - | - | - | - |
| 61940 | SKF | - | - | - | - | - | - | - | - |
| 60" | John Deere | - | - | - | - | - | - | - | - |
| 3994 | Bower | - | - | - | - | - | - | - | - |
| A8VO107/140/200 | Rexroth | - | - | - | - | - | - | - | - |
| SD14 | - | - | - | - | - | - | - | - | - |
| V170/150 | Rexnord | - | - | - | - | - | - | - | - |
| LS400 | - | - | - | - | - | - | - | - | - |
| ZX200-3 | - | - | - | - | - | - | - | - | - |
| H3272 Bearing Adapter Sleeve For Assembly | Cup Part Number:Y31309M; C - Cup Width:18.000 mm; r - Cup Backface To Clear Radius1:1.52 mm; G1 - Heat Generation Factor (Roller-Raceway):30.4; G2 - Heat Generation Factor (Rib-Roller End):12.7; Cg - Geometry Factor:0.1; Series:31309M; e - ISO Factor3:0.83; K - Factor2:0.71; Da - Cup Frontface Backing Diameter:95.5 mm; |
| 22214E Self -aligning Roller Bearing 70*125*31mm | D:80 mm; B:18 mm; C:18 mm; Bearing number:NJ 208; Bore Diameter (mm):40; Size (mm):40x80x18; Outer Diameter (mm):80; Brand:SIGMA; Width (mm):18; d:40 mm; |
| 22248CA Self Aligning Roller Bearing 240X440X120mm | KBRG:6101; internal clearance:C0; SRIX:0.04; mass:1.37; Precision Class:ABEC 1 | ISO P0; da min.:64 mm; ra max.:2 mm; DA_:20.638; Outer Diameter (mm):120; (Oil) Lubrication Speed:6 700 r/min; |
| 22314E.T41A Self -aligning Roller Bearing 70*150*51mm | Brand:CX; C:140 mm; Weight:279 Kg; Outer Diameter (mm):950; B:140 mm; Bearing number:NU29/710; Basic dynamic load rating (C):3650 kN; Basic static load rating (C0):8530 kN; (Grease) Lubrication Speed:600 r/min; D:950 mm; |
| 1508 Self-aligning Ball Bearing 40x80x23mm | r1,2 min.:1 mm; bore diameter:25 mm; Minimum Buy Quantity:N/A; Noun:Bearing; overall width:15 mm; da - min.:30.6 mm; Enclosure:2 Seals; d:25 mm; Fatigue load limit Pu:0.335 kN; finish/coating:Uncoated; |
| 1208 Self-aligning Ball Bearing 40x80x18mm | Angle (α):15 °; D:140 mm; Basic static load rating (C0):69,1 kN; C:24 mm; Bearing number:7018 C; Width (mm):24; Brand:CX; Size (mm):90x140x24; d:90 mm; Outer Diameter (mm):140; |
| 1311EKTN9 Bearing 55mm×120mm×29mm | r1 min.:5 mm; Calculation factor (Y1):1,7; Da:1028 mm; Weight:129 Kg; Outer Diameter (mm):1062; ra1 max.:4 mm; T:92 mm; C:76 mm; Db:1048 mm; r min.:6 mm; |
| 23980CA Spherical Roller Bearing 400X540X106MM | SREX:0.025; ra:1; Inventory:0.0; DA_:10.319; Maximum Capacity / Filling Slot:No; Internal Clearance:C0-Medium; ALPHA_:0; Manufacturer Item Number:6013VV; Enclosure Type:Non-Contact Seal; da min:71.5; |
| 25 mm x 47 mm x 12 mm 24156CA Self-Aligning Roller Bearings 280X460X180MM | D:140 mm; Brand:ISO; Bore Diameter (mm):65; Bearing number:NJ3313; C:58,7 mm; d:65 mm; B:58,7 mm; Width (mm):58,7; Outer Diameter (mm):140; Size (mm):25 mm x 47 mm x 12 mm ; |
| 22319EK.T41A Self-aligning Roller Bearing 95*200*67mm | Maximum Capacity / Filling Slot:No; Bore Diameter (mm):200; Weight / Kilogram:7.17; Enclosure:Open; Basic static load rating (C0):168 kN; B:38 mm; Inch - Metric:Metric; Precision Class:ABEC 1 | ISO P0; Internal Clearance:C0-Medium; Basic dynamic load rating (C):157 kN; |
24152CA/HAW36 Self Aligning Roller Bearing 260x440x180mm Video
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
Marine Plywood - Boulter Plywood
Okoume A/B BS1088 Lloyds Approved Quantity Discounts. Water & boil proof glue (WBP), Whole piece rotary cut face, Minimum 1.2mm face veneer thickness
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide