No. | Brand | I | A | t | c | w | Y | R | Q |
3mm | - | - | - | - | - | - | - | - | - |
CS209LLU | NSK | - | - | - | - | - | - | - | - |
1220X2440X9mm | - | - | - | - | - | - | - | - | - |
4-Ways | - | - | - | - | - | - | - | - | - |
155-800rpm | - | - | - | - | - | - | - | - | - |
663A | Bower | - | - | - | - | - | - | - | - |
4 | - | - | 36,5 mm | - | - | - | - | - | - |
30x47x9 | - | - | - | - | - | - | - | - | - |
18 | - | - | - | - | - | - | - | - | - |
1-2cm | - | - | - | - | - | - | - | - | - |
12 | - | - | - | - | - | - | - | - | - |
50 | - | - | - | - | - | - | - | - | - |
3-Jaw | - | - | - | - | - | - | - | - | - |
3446 | koyo | - | - | - | - | - | - | - | - |
1200 | - | - | - | - | - | - | - | - | - |
10V | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
GZ125 | - | - | - | - | - | - | - | - | - |
21% | - | - | 165 mm | - | - | - | - | - | - |
6003LLUNR/2A | NTN | - | - | - | - | - | - | - | - |
1633DC | RBC | - | - | 13 mm | - | - | - | - | - |
E0 | - | - | - | - | - | - | - | - | - |
3000PSI | Parker | - | - | - | - | - | - | - | - |
LS-G02-2CA-10-N | DAIKIN | - | - | - | - | - | - | 930 mm | - |
6330 | - | - | - | - | - | - | - | - | - |
23" | Rexroth | - | - | - | - | - | - | - | - |
E325C | - | - | - | - | - | - | - | - | - |
22210 EK Self -aligning Roller Bearing 50*90*23mm | C:92 mm; SRE:36.15; Outer Diameter (mm):580; Weight:111 Kg; fo:15; da min:340; C_conv:530000; da min.:354 mm; Brand:NSK; r min.:5 mm; |
1302 Bearing | Steering Pivot Rating:19400 lbf; D - Bearing O.D.:3.6720 in; B:1.0620 in; R - Fillet Radius Shaft (Max):0.03 in; Weight:1.80 lb; d - Bore Diameter:1.9470 in; Bearing Type:Thrust Tapered Rolle; Oil Holes in Retainer:Yes; |
22206H/HK Self-aligning Roller Bearing | (Refer.)Mass(kg):46.0; (Grease) Lubrication Speed:1100 r/min; D:480 mm; Cr:441; Brand:KOYO; ra(max):3; Basic static load rating (C0):487 kN; d:320 mm; f0:15.7; Bore Diameter (mm):320; |
1219K Self-Aligning Ball Bearing 95x170x32mm | Seal Type:Viton Single Lip; Cor - Static Load Rating:178049 lbf; Dimension R:16.8 in; Bearing Number:LSM170ABX; Bearing UPC:013992028884; Dimension N:13.875 in; Maximum Speed:1320 rpm; Dimension H:4.1 in; Bearing Type:Split Cylindrical Ex; Note:This product line wa; |
23148/W33 Self Aligning Roller Bearing 240×400×128mm | ID Chamfer Length (Ci):1.200; Bearing Outside Diameter Tolerance (Do tol.):90 +0.035 / +0.013; Bearing Outside Diameter, Nominal(Do):90.000; Shaft Dia., Nominal (d):70.0000; Material:Cast bronze with sol; Bearing Length Tolerance (B tol.) - -0.10 / -0.30:0.10 / 0.30; ID Chamfer Angle (B deg.):15; Outer Diameter (mm):90; Housing Bore Dia. (Dh) - 90 +0.035 / -0:90 +0.035 / 0; Bore Diameter (mm):70; |
24056CAK30/W33 Self Aligning Roller Bearing 280×420×140mm | d:420 mm; Brand:CX; Basic dynamic load rating (C):1280 kN; B:106 mm; Bore Diameter (mm):420; Width (mm):106; Size (mm):420x560x106; C:106 mm; Bearing number:NN3984; Weight:71,1 Kg; |
2212 Self-Aligning Ball Bearing 60x110x28mm | Cone Part Number:96825; Cg - Geometry Factor:0.163; a - Effective Center Location3:17 mm; Da - Cup Frontface Backing Diameter:334.26 mm; Bearing Weight:26.70 Kg; D:355.6 mm; e - ISO Factor8:0.59; Aa - Cage-Cone Backface Clearance:10.9 mm; K - Factor7:0.99; C0 - Static Radial Rating:319000 lbf; |
21318CCK Self Aligning Roller Bearing 90X190X43mm | Bore Diameter (mm):14; r min.:0,3 mm; Bearing number:NK14/16; Fw:14 mm; Basic static load rating (C0):13,7 kN; Da max.:20 mm; Width (mm):16; Weight:0,021 Kg; C:16 mm; Brand:JNS; |
1213K Self Aligning Ball Bearing | da - Inner Ring Backing Diameter:90.600 mm; Bearing Width:26 mm; Contact Angle:25 º; Ce - Dynamic Radial Rating1:98000 N; Da - Outer Ring Backing Diameter:129.900 mm; C0 - Static Radial Rating:73800 N; d:80 mm; Limiting Speed (Grease):9100 rpm; Full Timken Part Number:3MM216WICRDUH; Bearing Weight:1.448 Kg; |
1306 Bearing | Basic static load rating (C0):3,8 kN; Bearing number:71807 ATBP4; Angle (α):25 °; Bore Diameter (mm):35; Basic dynamic load rating (C):4,4 kN; Brand:CX; (Grease) Lubrication Speed:24000 r/min; D:47 mm; Outer Diameter (mm):47; Width (mm):7; |
22218EK Self-aligning Roller Bearing 90*160*40mm Video