| HMV100E Hydraulic Nut 502x636x67mm | Weight:410 Kg; d:1000 mm; Bore Diameter (mm):1000; B:165 mm; Bearing number:238/1000 CW33; Brand:CX; Width (mm):165; D:1220 mm; C:165 mm; Basic static load rating (C0):13600 kN; |
| GB 40779 S01 Bearing | Brand:SKF; Size (mm):200x115x80; Fatigue load limit Pu:95 kN; G1:13 mm; Limiting speed:2600 r/min; D1 ≈:168 mm; Da - max.:189 mm; Basic static load rating - C0:950 kN; K:3 mm; r1,2 - min.:2 mm; |
| 22332CA/CAK Self-aligning Roller Bearing 160*340*114mm | D2 ≈:21.2 mm; da min.:14,4 mm; ra max.:0,3 mm; Calculation factor (f0):13; D1:21,2 mm; d:8 mm; D2:0,3 mm; d1 ≈:14.45 mm; C:8 mm; Calculation factor kr:0.025; |
| 1201ETN9 Bearing 12mm×32mm×10mm | Fw:364 mm; Basic static load rating (C0):1960 kN; (Grease) Lubrication Speed:920 r/min; B:85 mm; D:540 mm; Basic dynamic load rating (C):1350 kN; Weight:93,1 Kg; Bore Diameter (mm):300; Bearing number:NJ260 E; Outer Diameter (mm):540; |
| 24138CAK30/C2W33 Self Aligning Roller Bearing 190X320X128mm | d:80 mm; Fw:110 mm; Weight:7.28 Kg; Brand:NACHI; Basic dynamic load rating (C):299 kN; Outer Diameter (mm):170; Bore Diameter (mm):80; r min.:3 mm; B:48 mm; Bearing number:NP 416; |
| 2222-K-M-C3 Bearing 80x140x33mm | Max. shaft corner radius, or 45 deg. chamfer (ch1):1.500; Inner Width (Bi):272.0000; Max. housing corner radius, or 45 deg. chamfer (ch):4.000; Bearing number:GEH380XT-2RS; Outer Dia (D):540.0000; Static Load Rating (Cor):45,880,000; Outer Diameter (mm):540; Dynamic Load Rating (Cr):22,940,000; Brand:AST; Mis-alignment Angle (a deg.):2; |
| 360405 Thrust Washer 113.95x140x3.3mm | Basic dynamic load rating (C):1350 kN; Outer Diameter (mm):550; Size (mm):400x550x90; Bore Diameter (mm):400; Ew:550 mm; Bearing number:N 1080; B:90 mm; Width (mm):90; Basic static load rating (C0):2280 kN; Weight:92.4 Kg; |
| 22320C Self Aligning Roller Bearing 100x215x73mm | Designation FAG:713660280; Compatibility:VOLVO / S60 / engin; Bearing number:VKBA 3524; Designation Ruville:6528; Designation SNR:R165.28; Brand:SKF; Designation SX:CX460; |
| 22206C/CK Self-aligning Roller Bearing | da min.:191 mm; Db:269 mm; Size (mm):171.45x298.45x63.5; Da min:255 mm; Da max.:287 mm; Width (mm):63,5; Bore Diameter (mm):171,45; Calculation factor (e):0,47; r1 min.:3,2 mm; Basic static load rating (C0):960 kN; |
| 29288 Thrust Roller Bearings 440X600X95MM | Weight:2.100 kg; Enclosure:Open; Radial Clearance:0.055 to 0.075 mm; Axial Load Factor Y2:4.14; Static Load Rating:193,000 N; Groove Width A:5 mm; Constant e:0.24; Da (max):118 mm; D:130 mm; Retainer Material:Pressed Steel; |