| 22214C/W33 Self Aligning Roller Bearing 70X125X31mm | Width (mm):92,1; d:110 mm; C:92,1 mm; Size (mm):110x240x92.1; Bore Diameter (mm):110; D:240 mm; Brand:ISO; B:92,1 mm; Bearing number:NUP3322; Outer Diameter (mm):240; |
| 23256K/C4 Self Aligning Roller Bearing 280x500x176mm | Weight:20 Kg; (Grease) Lubrication Speed:1500 r/min; C:60 mm; Basic static load rating (C0):1500 kN; Bore Diameter (mm):340; B:60 mm; D:420 mm; Brand:CX; Width (mm):60; d:340 mm; |
| 22216CAK Self Aligning Roller Bearing 80X140X33mm | Bore Diameter (mm):180; Bearing number:51336M; Width (mm):95; D:300 mm; Outer Diameter (mm):300; Brand:CRAFT; Size (mm):180x300x95; H:95 mm; d:180 mm; |
| BS2B248180 Bearing | B1:48,4 mm; d1:44,4 mm; O:21,56 mm; Weight:0,376 Kg; S:18,3 mm; C:18 mm; B2:15,9 mm; F1:52,53 mm; Bearing number:GE30KPPB3; Bore Diameter (mm):30; |
| 22319CAK/W33 Self Aligning Roller Bearing 95x200x67mm | Bearing Length, Nominal (B):60.000; Shaft Dia., Nominal (d):55.0000; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Type:straight; Bearing Outside Diameter, Nominal(Do):60.000; OD Chamfer Length (Co):1.800; Housing Bore Dia. (Dh) - 60 +0.030 / -0:60 +0.030 / 0; Outer Diameter (mm):60; ID Chamfer Angle (B deg.):45; Wall Thickness (S3):2.500; |
| 11209TN9 Wide Inner Ring Self-Aligning Ball Bearing 45x85x58mm | e:0.41; Cr:261; r1(min):3.2; Bore Diameter (mm):85,725; B:41,275 mm; C0r:301; r2 min.:3,2 mm; Bearing No.:665/653; Grease lub.:2600; Outer Diameter (mm):146,05; |
| 2216K Self Aligning Ball Bearing | Aa - Cage-Cone Backface Clearance:0.77 in; d:12.5000 in; da - Cone Frontface Backing Diameter:13.9 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:336000 lbf; Cone Part Number:EE720125; Cage Type:Pin-Type; Ab - Cage-Cone Frontface Clearance:0.38 in; db - Cone Backface Backing Diameter:15.35 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:139000 lbf; G2 - Heat Generation Factor (Rib-Roller End):183; |
| FAG 2204-TVH Bearings | Brand:NSK; C:17 mm; Fw:28 mm; Basic dynamic load rating (C):17,8 kN; D:39 mm; Outer Diameter (mm):39; Width (mm):18; Bearing number:NA49/22TT; Bore Diameter (mm):22; d:22 mm; |
| H210 Low Price Adapter Sleeve H Series 45x70x35mm | K - Factor8:1.51; d:4.1250 in; Design Units:Imperial; G2 - Heat Generation Factor (Rib-Roller End):41.3; R - Cone Backface To Clear Radius3:0.14 in; B - Cone Width:1.8900 in; G1 - Heat Generation Factor (Roller-Raceway):227.3; Cone Part Number:782; Aa - Cage-Cone Backface Clearance:0.13 in; db - Cone Backface Backing Diameter:4.8 in; |
| 22213/W33 Self Aligning Roller Bearing 65X120X31mm | Outer Diameter (mm):34,925; D:34,925 mm; Weight:0,04 Kg; Bore Diameter (mm):15,875; Width (mm):11,112; B:11,112 mm; Brand:ZEN; C:11,112 mm; Basic dynamic load rating (C):2,67 kN; d:15,875 mm; |