| No. | Brand | I | A | t | c | w | Y | R | Q |
| NJ2213 | NSK | - | - | - | - | - | - | - | - |
| 15x3.5 | - | - | - | - | - | - | - | - | - |
| (4 | - | - | - | - | - | - | - | - | - |
| 22216 | SKF | - | - | - | - | - | - | - | - |
| 24V | Parker | - | - | - | - | - | - | - | - |
| 400 | NTN | - | - | - | - | - | - | - | - |
| 50000 | - | - | - | - | - | - | - | - | - |
| 22218E/C4 | - | - | - | - | - | - | - | - | - |
| UCP-1.3/16MFG1 | NTN | - | - | - | - | - | - | - | - |
| N21%MIN | - | - | - | - | - | - | - | - | - |
| 191-5547 | - | - | - | - | - | - | - | - | - |
| NN3028 | - | - | - | - | - | - | - | - | - |
| 250WOGPSI | Parker | - | - | - | - | - | - | - | - |
| X204 | - | - | - | - | - | - | - | - | - |
| 61910.ZZ | - | - | - | - | - | - | - | - | - |
| plywood-18mm | INA | - | - | - | - | - | - | - | - |
| 1000 | NTN | - | 10,5 mm | - | - | - | - | - | - |
| (SO4) | - | - | - | - | - | - | - | - | - |
| 304 | INA | - | - | - | - | - | - | - | - |
| Jp-Gc101t | - | - | - | - | - | - | - | - | - |
| 23076 | - | - | - | - | - | - | - | - | - |
| 18 | - | - | 44 mm | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | 2,5 mm | - |
| MA5209TV | Link-Belt | - | - | - | - | - | - | - | - |
| 45X75X19 | - | - | - | - | - | - | - | - | - |
| 4'*8' | - | - | - | - | - | - | - | - | - |
| R180LC-7 | INA | - | - | - | - | - | - | - | - |
| 10+ | - | - | 45 mm | - | - | - | - | - | - |
| 1209 Bearing 45x85x19mm | Dynamic Load Rating (Cr):241; Bearing Type:adjustable clearance; Groove Width (C2):0.068; Weight (g):145.00; Static Load Rating (Cor):665; Bearing number:LBB 16 AJ; Groove-to-groove length (C1):1.753; Outside Dia. (D):1.563; Shaft Dia. (Fw):1.000; Adjustable Open Gap (h):0.094; |
| 1315-M Bearing 75x160x37mm | da - Cone Frontface Backing Diameter:5.51 in; G2 - Heat Generation Factor (Rib-Roller End):62; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:148000 lbf; Series:795; K - Factor8:1.27; B - Cone Width:1.875 in; C0 - Static Radial Rating:133000 lbf; db - Cone Backface Backing Diameter:5.75 in; Design Units:Imperial; |
| 240/630CA/W33 Self Aligning Roller Bearing 630×920×290mm | Factor (K):1,39; d:50 mm; R:1,5 mm; Bore Diameter (mm):50; Basic dynamic load rating (C90):21,8; D:90 mm; Brand:Timken; Basic dynamic load rating (C1):83,9 kN; da:58 mm; a -:3,6 mm; |
| 24140CA/W33 Self Aligning Roller Bearing 200x340x140mm | Size (mm):35x80x21; Width (mm):21,000; D:80,000 mm; Outer Diameter (mm):80,000; Bearing number:7307BA; Bore Diameter (mm):35,000; B:21,000 mm; C:21,000 mm; Brand:SNR; d:35,000 mm; |
| 22326/W33 Self Aligning Roller Bearing 130×280×93mm | Width (mm):19,05; C:19,05 mm; Fw:44,45 mm; D:53,975 mm; Weight:0,08 Kg; Basic static load rating (C0):75 kN; Bearing number:S2812; Size (mm):44.45x53.975x19.05; Brand:INA; Basic dynamic load rating (C):36 kN; |
| 29328 Thrust Roller Bearings 140X240X60MM | Designation Ruville:5244; Bearing number:CX536; Brand:CX; Compatibility:FORD / COUGAR / eng; Designation FAG:713678350; Designation SKF:VKBA 1482; |
| H320 Low Price Adapter Sleeve H Series 90x100x71mm | B:46 mm; b:8.7 mm; H:46,000 mm; Y2:2.9; Dynamic load, C:340 kN; Characteristic rolling element frequency, BSF:4.77 Hz; d:60,000 mm; D1:111.9 mm; Nref:4,300 rpm; Bore Diameter (mm):60,000; |
| 24126/W33 Self Aligning Roller Bearing 130x210x80mm | Basic static load rating (C0):202 kN; r min.:1,1 mm; Oil lub.:2700; Da(max):68; D:95 mm; Basic dynamic load rating (C):96,6 kN; Da max.:68 mm; (Refer.)Mass(kg):1.01; Outer Diameter (mm):95; D1(min):52; |
| 24064CA/W33 Self Aligning Roller Bearing 320×480×160mm | Outer Diameter (mm):130; Size (mm):85x130x29; Bearing number:32017; Bore Diameter (mm):85; T:29 mm; Brand:CRAFT; Width (mm):29; D:130 mm; d:85 mm; |
| 24160CA/W33 Self Aligning Roller Bearing 300X500X200mm | B:21 mm; (Grease) Lubrication Speed:6 800 r/min; Outer Diameter (mm):80; Angle (α):40 °; r min.:1,5 mm; C:21 mm; Brand:NTN; Basic static load rating (C0):48,5 kN; a:34,5 mm; D:80 mm; |
60 mm x 110 mm x 22 mm 1412 Self-aligning Ball Bearing 60x150x35mm Video
NSK 6212VV Deep groove ball bearings - Nodes bearing
NSK 6212VV bearing, single row deep groove ball bearing, VV: With Two Non-Contact Sealed, Dimensions: 60mm x 110mm x 22mm, Limiting Speeds:5600
Bearing 6212VV (NSK) | Size and Specification | Bearings
Deep groove ball bearings 6212VV. Bearing number : 6212VV. Size (mm) : 60x110x22. Brand : NSK. Bore Diameter (mm) : 60. Outer Diameter (mm) : 110
6212 VV - NSK Deep Groove - Quality Bearings Online
This 6212VV NSK bearing is a Sealed Deep Groove Radial Ball Bearing with a non-contact rubber seal, this bearing also has a standard radial internal
NSK 6212VV bearings
NSK 6212VV bearings is the top notch excellent quality bearing among their competitors at discounted rates. Rolls Bearing Limited bringing you the top notch
NSK 6212VV Deep Groove Ball Bearing, Single Row, Double
NSK 6212VV Deep Groove Ball Bearing, Single Row, Double Sealed, Non-Contact, Pressed Steel Cage, Normal Clearance, Metric, 60mm Bore, 110mm OD,
6212VV | Deep Groove Ball Bearing | NSK - Misumi
Deep Groove Ball Bearing - Standard, Single Row (NSK) of NSK,6212VV, Check out the variety of configurable, Deep Groove Ball Bearing - Standard, Single
NSK - 6212 VV - Motion Industries
NSK 6212 VV. Radial/Deep Groove Ball Bearing - Round Bore, 60 mm ID, 110 mm OD, 22 mm Width, Two Non-Contact Seals, Internal Clearance: C0