| Excavator Slewing Ring For PC600-6, Part Number:21M-25-11100 | D:52 mm; Basic static load rating C0:51 kN; ra max.:0.3 mm; r1,2 min.:0.3 mm; Frictional moment:0.15 N·m; Static axial stiffnes:680 N/µm; d2:32.2 mm; Preload:1650 N; da min.:25 mm; b:4.2 mm; |
| 132.40.1800 Slewing Bearing | B:20.00 mm; d:30.000 mm; Oil Speed Rating n2:12000 rpm; D:62.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:23800 N; Basic Static Radial Load Rating Co:6700 N; Grease Speed Rating n1:9500 rpm; |
| RB2008UU High Precision Cross Roller Ring Bearing | d:25.4 mm; J:41.3 mm; Housing material:Composite for food a; Hexagonal key size for grub screw N:3.175 mm; L:70 mm; Thread grub screw G2:1/4-28 UNF; A5:22.2 mm; A1:11.4 mm; L1:63.5 mm; Basic dynamic load rating C:14 kN; |
| CRBD 09025 A Cross Roller Ring 90x210x25mm | Accessories:One Seal; B:39.00 mm; Sealed Speed Rating n3:2600 rpm; Fillet Radius ra:2.00 mm; D:170.0000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Grease Speed Rating n1:3800 rpm; Basic Dynamic Radial Load Rating C:124000 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Basic Static Radial Load Rating Co:86500 N; |
| 29 mm x 53 mm x 37 mm 131.40.1400 Slewing Bearing | Db max.:66 mm; db min.:44.6 mm; Static axial stiffness, preload class A:96 N/µm; Calculation factor f2B:1.02; Preload class A GA:100 N; Static axial stiffness, preload class D:214 N/µm; Calculation factor f1:0.99; d:40 mm; D1:58.8 mm; Fatigue load limit Pu:0.44 kN; Size (mm):29 mm x 53 mm x 37 mm ; |
| RB11020UUC0 High Precision Cross Roller Ring Bearing | Da:130 mm; Max. speed for PosiTrac Plus seal:2350 r/min; L:285.75 mm; Cap bolt recommended tightening torque:149.1 N·m; Adapter sleeve assembly:SNW 15x2.1/2; Mass pillow block:14.3 kg; Stabilizing ring:SR-15-0; A1:79.375 mm; Bearing:22215 EK; P150°:33.4 kN; |
| RB70045UUC0 High Precision Cross Roller Ring Bearing | Bearing (basic designation):23048 K; J:540 mm; N4 max.:20 mm; P55°:4000 kN; Appropriate attachment bolt, size G:30 mm; P120°:1400 kN; A1:240 mm; Q120°:1800 kN; P90°:1900 kN; Appropriate attachment bolt, rec. tightening torque:1310 N·m; |
| CRBE 03515 A Cross Roller Bearing 35x95x15mm | Lock nut:AN 16; Hydraulic nut:HMVC 16E; B4:16.916 mm; Mass adapter sleeve assembly:1.1 kg; d:80 mm; B:15.342 mm; Sleeve:S 16x2.3/4; Threads per inch:12; d1:69.85 mm; G:79.68 mm; |
| CRBC 18025 Crossed Roller Bearings 180x240x25mm Industrial Robots Arm Use | Threads per inch:12; Lock nut:AN 28; Lock washer:W 28; d:140 mm; B:24.079 mm; G:139.624 mm; d1:127 mm; Sleeve:S 28x5; B1:100.863 mm; Mass adapter sleeve assembly:4.75 kg; |
| 110.32.1250 Slewing Bearing | α:6 °; C:52.375 mm; Specific dynamic load factor K:150 N/mm²; d:69.85 mm; Da max.:104.2 mm; Specific static load factor K0:300 N/mm²; Sealing solution:Triple-lip seals; Lubricant:Maintenance free &nd; r2 min.:1 mm; D:111.125 mm; |