| No. | Brand | C | K | A | T | a | G | h | b |
| 400 | fag | - | - | - | - | - | - | 39.688 mm | - |
| #RNA4901-2RSR | INA | - | - | - | - | - | - | - | - |
| 24W | - | - | - | - | - | - | - | - | - |
| A2f107 | INA | - | - | - | - | 6 mm | - | - | - |
| 12/15/18/21mm | - | - | - | - | - | - | - | - | - |
| 2220104 | - | - | 4.5 mm | - | 65 mm | - | - | - | - |
| 23PC | - | - | - | - | - | - | - | - | - |
| 190g | - | - | - | - | - | - | - | - | - |
| 6915 | Nachi | - | - | - | - | - | - | - | 15 mm |
| NUP305E.M1.C3 | fag | - | - | - | - | - | - | - | - |
| 1200 | NTN | - | - | - | - | - | - | - | - |
| Sb-Pts07 | - | - | - | - | - | - | - | - | - |
| FYRP2 | SKF | - | - | - | - | - | - | - | - |
| CBX750 | - | - | - | - | - | - | Tr 260x4 | - | - |
| 8x16x5 | - | - | - | - | - | 53 mm | - | - | - |
| FC20 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 22317EK | - | - | - | - | - | - | M 140x2 | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 12kw | - | - | - | - | - | - | - | - | - |
| NA4903-RSR | - | - | - | - | - | - | - | - | 27 mm |
| 6D114E-3 | - | - | - | 15 mm | - | - | Tr 850x7 | - | - |
| EKEXV250 | DAIKIN | - | - | - | - | - | - | - | - |
| 5120 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| (YC-T68) | - | - | - | - | - | - | - | - | - |
| 21%) | - | - | - | - | - | - | - | - | - |
| 4mm | - | - | - | - | - | - | - | - | - |
| Excavator Slewing Ring For PC600LC-7, Part Number:21M-25-11100 | H2:41.275 mm; R2:27.781 mm; Cap bolt:2 x 5/8-11 UNC; R1:60.325 mm; H1:101.6 mm; da:82.55 mm; Cap bolt, SAE grade:5; PG:1/8 NPT; Mass pillow block:21.4 kg; A1:98.425 mm; |
| RB12016 Cross Roller Bearings 120*150*16mm | H:114.3 mm; Basic dynamic load rating C:84.5 kN; A1:80.169 mm; S:0.794 mm; Attachment bolt diameter G:15.875 mm; Limiting speed:4100 r/min; L:225.425 mm; J max.:180.975 mm; A:63.5 mm; H2:33.337 mm; |
| A18-74E3 Four Point Contact Ball Slewing Bearing With External Gear | s:2.7 mm; Pu:42.680 kN; r1s (min):3 mm; Static (Coa):414 kN; F:143 mm; d2:110 mm; B:50 mm; b:14 mm; Dynamic (Ca):391 kN; D:240 mm; |
| RB13025 Cross Roller Bearing | d2 max.:47 mm; C1 max.:17.5 mm; Mass rod end:0.26 kg; B:23 mm; Material constant KM:530; d:18 mm; r1 min.:0.3 mm; l7 min.:23 mm; Basic dynamic load rating C:26 kN; dk:31.75 mm; |
| 24100N7529F1 Swing Bearing For KOBELCO SK100 III Excavator | Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:3200 rpm; d:85.000 mm; D:210.0000 mm; Basic Static Radial Load Rating Co:200000 N; B:52.00 mm; Accessories:Two Shields & Snap-R; Basic Dynamic Radial Load Rating C:190000 N; Grease Speed Rating Open/Shielded n1:2600 rpm; |
| RA15008 Crossed Roller Bearings 150x166x8mm | with tapered bore:1 300 min-1; with cylindrical bore:1 000 min-1; Static (Cor):16.7 mm; Grease:2090 kN; D:340 mm; Dynamic (Cr):9 mm; d:160 mm; Pu:1530 kN; rs (min):4 mm; Oil:193.620 kN; |
| RE 16025 UU Crossed Roller Bearing 160x220x25mm | P90°:107 kN; P180°:72.5 kN; J max.:368.3 mm; P120°:66.7 kN; R1:67.866 mm; Eye bolt:2 x 3/8-16 UNC; Da:200 mm; Cap bolt:5/8-11 UNC; Adapter sleeve assembly:SNW 22x3.15/16; Initial grease fill:232.47 g; |
| RA16013 Cross Roller Bearing 160x186x13mm | ra max.:3 mm; Fatigue load limit Pu:305 kN; Da min.:426 mm; Da max.:465 mm; Basic static load rating C0:4000 kN; Mass bearing:75.5 kg; r1,2 min.:4 mm; d:320 mm; Limiting speed:1400 r/min; B:121 mm; |
| 024.60.3550 Bearing 3272x3828x226mm | Oil Speed Rating Open/Shielded n2:3600 rpm; d:110.000 mm; Oil Speed Rating n2:3600 rpm; D:200.0000 mm; B:38.00 mm; Basic Dynamic Radial Load Rating C:143000 N; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2000 rpm; Grease Speed Rating Open/Shielded n1:3000 rpm; Grease Speed Rating n1:3000 rpm; |
| RA7008UUCC0 Crossed Roller Bearing 70x86x8mm | d1:304.8 mm; Locking plate:PL 64; Mass adapter sleeve assembly:29.5 kg; B:42.316 mm; Hydraulic nut:HMVC 64E; Threads per inch:6; B5:51.841 mm; B1:176.174 mm; Sleeve:S 3064x12; d:320 mm; |
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
RU 42 UU Crossed Roller Bearing 20x70x12mm Video