No. | Brand | C | K | A | T | a | G | h | b |
125 | Rexroth | - | - | - | - | - | - | - | - |
512006 | Timken | - | - | - | - | - | - | - | - |
8-30 | - | - | - | - | - | - | - | - | - |
46%, | - | - | - | - | - | - | - | - | - |
440X320mm | - | - | - | - | - | - | - | - | - |
4515 | - | - | - | - | - | - | - | - | - |
9 | - | - | - | - | - | - | - | - | - |
MR125-2RSC, | - | - | - | - | - | - | - | - | - |
5707 | Timken | - | - | - | - | - | - | 15.342 mm | 37.592 mm |
21mm | - | - | - | - | - | - | - | - | - |
HA594181 | Timken | - | - | - | - | - | - | - | - |
510029 | Timken | - | - | - | - | - | Tr 800x7 | - | - |
21% | - | - | - | - | - | - | - | - | - |
50 | - | - | - | - | - | - | M 100x2 | - | - |
LM6UU | - | - | - | - | - | - | - | - | - |
60 | - | - | - | - | - | - | - | - | - |
SO-4000FI | - | - | - | - | - | - | - | - | - |
1040 | - | - | - | - | - | - | - | - | - |
2-11/16" | FAFNIR | - | - | - | - | - | - | - | - |
Mk2, | - | - | - | - | - | - | - | - | - |
6076 | - | - | - | - | - | - | - | - | - |
209KDD | FAFNIR | - | - | - | - | - | - | - | - |
4132-2CS5V | SKF | - | - | - | - | - | - | - | - |
30277 | - | - | - | - | - | - | - | - | - |
012.60.2800 Slewing Bearing | Shielded or Sealed B1:7.1 mm; Width Plain B:5.6 mm; Oil Speed Rating Open/Shielded n2:38000 rpm; Basic Static Radial Load Rating Co:1340 N; d:9.500 mm; Basic Dynamic Radial Load Rating C:3320 N; Grease Speed Rating Open/Shielded n1:31000 rpm; D:22.2000 mm; Fillet Radius ra:0.41 mm; Sealed Speed Rating n3:21000 rpm; |
6397/2800G2 Slewing Bearing 2800x3360x220mm | Mass pillow block:213 kg; P60°:416 kN; Cap bolt:1 1/8-7 UNC; Bearing:22238 CC/W33; P120°:151 kN; db:212.725 mm; Eye bolt:2 x 3/8-16 UNC; A2:276.225 mm; PG:1/4 NPT; H:398.462 mm; |
ZP1 Slewing Bearing | d3:58 mm; Ba min.:6 mm; B1:36 mm; r1,2 min.:1.1 mm; Calculation factor Y1:2.7; db min.:44 mm; Basic dynamic load rating C:33.8 kN; Calculation factor e:0.23; d:35 mm; Mass bearing + adapter sleeve:0.85 kg; |
RA13008 Crossed Roller Bearings 130x146x8mm | Oil:13 000 min-1; B:24 mm; d:25 mm; Dynamic (Cr):21.123 kN; ra:1 max; Static (Cor):10.806 kN; Grease:11 000 min-1; rs:1.1 mm; Weight:0.32 kg; Da:55 max; |
YRT120 Rotary Table Bearing 120x210x40mm | Q150°:1650 kN; N:50 mm; L:830 mm; N1:42 mm; Da:480 mm; Q180°:1430 kN; da:300 mm; Appropriate attachment bolt, size G:36 mm; N4 max.:25 mm; ba min.:121 mm; |
RB17020 Cross Roller Bearings 170*220*20mm | Oil Speed Rating Open/Shielded n2:3600 rpm; d:140.000 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Fillet Radius ra:2.00 mm; D:210.0000 mm; Basic Dynamic Radial Load Rating C:111000 N; B:33.00 mm; Accessories:Snap-Ring; Sealed Speed Rating n3:1800 rpm; Basic Static Radial Load Rating Co:108000 N; |
7397/2216K Slewing Bearing | A3:3.2 mm; Bearing:YELAG 210; Basic dynamic load rating C:35.1 kN; J:111 mm; Recommended diameter for attachment bolts, mm G:16 mm; Recommended diameter for attachment bolts, inch G:0.625 in; Mass bearing unit:2.35 kg; Housing material:Cast iron; Thread grub screw G2:M10x1; d:50 mm; |
023.60.3150 Slewing Bearing | Stabilizing ring:SR-20-17; Pa:15.3 kN; Adapter sleeve assembly:SNW 117x2.7/8; R1:66.675 mm; P90°:56.5 kN; Initial grease fill:181.44 g; N1:25.4 mm; RG:3/8 NPT; Da:180 mm; H:222.25 mm; |
4789/930K Slewing Bearing | d:60.000 mm; Basic Dynamic Radial Load Rating C:31200 N; B:28.00 mm; Basic Static Radial Load Rating Co:12200 N; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:1.50 mm; D:110.0000 mm; |
A14-49P1A Four Point Contact Ball Slewing Bearings SLEWING RINGS | Sealed Speed Rating n3:52000 rpm; Fillet Radius ra:0.30 mm; Oil Speed Rating Open/Shielded n2:91000 rpm; Shielded or Sealed B1:4.4 mm; Accessories:One Seal; Width Plain B:4.4 mm; Grease Speed Rating Open/Shielded n1:75000 rpm; D:12.7000 mm; Basic Static Radial Load Rating Co:120 N; d:3.200 mm; |
1167/530 Bearing 530x780x60mm Video