| 227-6052 Swing Bearing For Caterpillar 345C Excavator | Threads per inch:5; d1:354.012 mm; d:380 mm; B1:196.418 mm; Hydraulic nut:HMVC 76E; Locking plate:PL 76; B:48.666 mm; G:378.993 mm; B5:59.766 mm; Mass adapter sleeve assembly:43 kg; |
| MTO-050T Heavy Duty Slewing Ring Bearing | B1:142.519 mm; Sleeve:S 130x5.1/4; Mass adapter sleeve assembly:8.15 kg; Hydraulic nut:HMVC 30E; d:150 mm; G:149.555 mm; d3 max.:195.402 mm; d1:133.35 mm; Lock washer:W 30; Threads per inch:12; |
| 282.30.1375.013 Four Contact Ball Slewing Ring 1212x1498x90mm | Minimum load factor A:910; H:140 mm; Reference speed:260 r/min; Fatigue load limit Pu:150 kN; Basic static load rating C0:13200 kN; Mass bearing (including seat washer where applicable):275 kg; D:1180 mm; d:1000 mm; ra max.:4 mm; da min.:1106 mm; |
| RU297UUCC0P5 High Precision Crossed Roller Bearing | Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; D1:245 mm; Specific static load factor K0:45 N/mm²; Mass bushing:4.88 kg; Specific dynamic load factor K:25 N/mm²; B1:10 mm; h:212.5 mm; α:124 °; Coefficient of friction µ min.:0.08; |
| R11-71N3 Crossed Roller Slewing Rings With Internal Gear | H1:114.3 mm; N1:22.225 mm; P60°:104 kN; Adapter sleeve assembly:SNW 117x2.15/16; P150°:35.6 kN; L:387.35 mm; J1:60.325 mm; Cap bolt:2 x 3/4-10 UNC; Bearing:1317 K; End plug (suffix Y):EPR 10; |
| R9-63E3 Crossed Roller Slewing Rings With External Gear | Fatigue load limit Pu:7.35 kN; Calculation factor A:0.0954; Basic dynamic load rating C:200 kN; Limiting speed:8000 r/min; r0:2 mm; Da max.:138 mm; h:10.1 mm; D:150 mm; Calculation factor Y1:0.66; Calculation factor e:0.95; |
| RE 24025 UU Crossed Roller Bearing 240x300x25mm | Basic static load rating C0:14.6 kN; C:9.25 mm; Basic dynamic load rating C:18.5 kN; a:8.308 mm; Mass bearing:0.055 kg; Dimension series:2CC; rb max.:0.6 mm; Da max.:30.5 mm; D:35 mm; d:15 mm; |
| VLA 201094-N Four Point Contact Slewing Ring | H1:101.6 mm; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; P180°:49.8 kN; Labyrinth ring:2 x LOR 189; P60°:121 kN; L:349.25 mm; End plug (suffix Y):EPR 11; Da:160 mm; J min.:260.35 mm; |
| RB17020 Cross Roller Bearing 170x220x20mm | A1:11.4 mm; Recommended diameter for attachment bolts, mm G:10 mm; End cover:ECL 205; H:120.5 mm; Recommended tightening torque for grub screw:4 N·m; J1:28.6 mm; J:41.3 mm; Basic static load rating C0:7.8 kN; s1:19.8 mm; B4:5 mm; |
| CRBD 08022 C Cross Roller Ring 80x165x22mm | Oil Speed Rating n2:2000 rpm; Basic Static Radial Load Rating Co:540000 N; Basic Dynamic Radial Load Rating C:390000 N; Fillet Radius ra:3.00 mm; Fillet Radius rb:1.00 mm; D:360.0000 mm; B:58.00 mm; d:200.000 mm; Grease Speed Rating n1:1600 rpm; |