No. | Brand | C | K | A | T | a | G | h | b |
6848 | NSK | - | - | - | - | - | 499.008 mm | - | - |
PC200-7 | - | - | - | - | - | - | - | - | - |
10l | - | - | - | - | - | - | - | - | - |
SK6-37PZ | - | - | - | - | - | - | - | - | - |
ZX10 | koyo | - | - | - | - | - | M 170x3 | - | - |
24 | Thomson | - | - | - | - | - | - | - | - |
7x19x6mm | - | - | - | - | - | - | - | - | - |
4-28x50 | - | - | - | - | - | - | - | - | - |
IP44 | - | - | - | - | - | - | - | - | - |
4-5 | - | - | - | - | - | - | - | - | - |
(4 | John Deere | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
RWU25E-L-RRF | INA | - | - | - | - | - | - | - | - |
1979 | Timken | - | - | - | - | - | - | - | - |
6704 | - | - | - | - | - | 280 mm | - | 12.5 mm | - |
23128B | - | - | - | - | - | - | - | - | - |
2x | TRW | - | - | - | - | - | - | - | - |
23236CA | - | - | 12 mm | - | - | - | - | - | - |
PC60-6 | - | - | 12 mm | - | - | - | - | - | - |
1.6 | - | - | - | - | - | - | - | - | 7 mm |
Sulfate(NH4)2SO4 | - | - | - | - | - | - | - | - | - |
2007-2008 | koyo | - | - | - | - | - | - | - | - |
23 | - | - | - | - | - | - | - | - | - |
4510BD20AAAE53 | Parker | - | - | - | - | - | - | - | - |
R30LRAMKT | - | - | - | - | - | - | - | - | - |
RB1000110 Cross Roller Bearing 1000x1250x110mm | Basic dynamic load rating C:245 kN; d:60 mm; b:6.2 mm; d1 ≈:68 mm; Da max.:84.2 mm; Specific static load factor K0:500 N/mm²; b1:6.2 mm; C:36 mm; α:3 °; D:90 mm; |
XU160405 Crossed Roller Slewing Bearings 336x474x46mm | B:25.40 mm; Basic Dynamic Radial Load Rating C:30700 N; d:25.000 mm; Basic Static Radial Load Rating Co:20400 N; Oil Speed Rating n2:10000 rpm; Accessories:Two Shields; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:7500 rpm; D:62.0000 mm; Sealed Speed Rating n3:7500 rpm; |
MTE-730T Heavy Duty Slewing Ring Bearing | d:45.000 mm; D:68.0000 mm; Fillet Radius rb:0.15 mm; Oil Speed Rating n2:11000 rpm; Fillet Radius ra:0.64 mm; B:12.00 mm; Basic Dynamic Radial Load Rating C:15100 N; Basic Static Radial Load Rating Co:13400 N; Grease Speed Rating n1:9000 rpm; |
9E-1B32-1086-0530 Four Point Contact Ball Slewing Ring | r3,4 min.:2.5 mm; D:110 mm; db min.:77.5 mm; Ca min.:5 mm; d:65 mm; C:22.5 mm; rb max.:2.5 mm; Fatigue load limit Pu:21.2 kN; Cb min.:5.5 mm; Calculation factor Y0:0.8; |
2792/2000G2 Bearing 2000x2420x160mm | End plug (suffix Y):EPR 15; da:120 mm; R1:79.375 mm; Lock nut:AN 24; Da:215.001 mm; S:4.763 mm; Ca:67.793 mm; R2:30.163 mm; P90°:149 kN; Cap bolt, SAE grade:8; |
CRBF 108 AT Crossed Roller Bearings 10x52x8mm With Mounting Hole | s:32.941 mm; Attachment bolt diameter G:19.05 mm; A:76.2 mm; Basic dynamic load rating C:212 kN; S:0.794 mm; Limiting speed:2800 r/min; H1:79.375 mm; da:69.85 mm; H:160.338 mm; J max.:247.65 mm; |
110.25.560 Slewing Bearing | b1:15.5 mm; D:400 mm; α:6 °; ra max.:1 mm; Da max.:388.5 mm; Sealing solution:Triple-lip seals; Basic static load rating C0:18000 kN; b:15.5 mm; Mass plain bearing:65 kg; Lubricant:Regular relubricatio; |
W14-71P1 Four-point Contact Ball Slewing Rings | Design variant/feature:TDIS/N; d:305.07 mm; Comparative radial load rating CF:680 kN; Mass bearing:150 kg; Comparative axial load rating CFa:582 kN; D:500 mm; Basic static load rating C0:5200 kN; B:200 mm; T:200 mm; r1,2 min.:6.4 mm; |
DH220-3 Slewing Bearing | r1 max.:0.8 mm; r1,2 min.:0.3 mm; r2 max.:1 mm; Mass needle roller:3.43 g; Dw:4 mm; Lw:34.8 mm; |
RB15030 Cross Roller Bearing 150x230x30mm | Accessories:Two Seals; B:20.00 mm; Fillet Radius ra:1.00 mm; d:105.000 mm; Basic Static Radial Load Rating Co:44000 N; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Dynamic Radial Load Rating C:44200 N; Sealed Speed Rating n3:2600 rpm; Grease Speed Rating Open/Shielded n1:4300 rpm; D:145.0000 mm; |
1167/560 Bearing 560x720x36mm Video