| No. | Brand | C | K | A | T | a | G | h | b |
| 83D | - | - | - | - | - | - | - | - | - |
| Sulfate(NH4)2SO4 | - | - | - | - | - | - | - | - | - |
| (OWCT-22) | - | - | 12 mm | - | - | - | - | - | 22.3 mm |
| NJ210M | Nachi | - | - | - | - | - | 149.555 mm | - | - |
| NU305 | NSK | - | - | - | - | - | - | - | - |
| 55 | - | - | - | - | - | - | - | - | - |
| 60092RSR | fag | - | - | - | - | - | - | - | - |
| 50tac03at85 | NSK | - | - | - | - | - | - | - | - |
| 10x | - | - | - | - | - | - | - | - | - |
| 20x27x4 | - | - | - | - | - | - | - | - | - |
| 2000 | koyo | - | - | - | - | - | - | - | - |
| 205 | SKF | - | - | - | - | - | M 60x2 | 3 mm | 7 mm |
| 3318-C3 | fag | - | - | - | 41.275 mm | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | 22.3 mm |
| 99% | - | - | - | - | - | - | - | - | mm |
| PVP16 | Parker | - | - | - | - | - | - | - | - |
| DH225 | - | - | - | - | - | - | - | - | - |
| M28 | - | - | - | - | - | - | - | - | - |
| 6310-2Z-JEM | SKF | - | - | - | - | - | - | - | - |
| NK16/16 | INA | - | - | - | - | - | - | - | - |
| SDA16 | - | - | - | - | - | - | - | - | - |
| 140K | - | - | - | - | - | - | - | - | - |
| TWA1018 | INA | - | - | - | - | - | - | - | - |
| 7202 | NSK | - | - | - | - | - | - | 51.594 mm | - |
| 80*96*90 | - | - | - | - | - | - | - | - | - |
| 14641032 | - | - | - | - | - | - | - | - | - |
| 3000*1500mm | - | - | - | - | - | - | - | - | - |
| E2 | INA | - | - | - | - | - | - | - | - |
| XU080430 Cross Roller Bearing Manufacturer 380x480x26mm | da max.:115 mm; Mass bearing:9.79 kg; Ca min.:8 mm; T:71.5 mm; r1,2 min.:4 mm; Fatigue load limit Pu:72 kN; Limiting speed:3400 r/min; Db min.:186 mm; C:55 mm; Da max.:187.5 mm; |
| 206-25-00400 Swing Bearing For Komatsu PC290LC-8 Excavator | Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; D1:80 mm; α:124 °; Coefficient of friction µ min.:0.08; h:56 mm; Coefficient of friction µ max.:0.15; a:3 mm; B1:8 mm; Permissible sliding velocity v max.:0.5 m/s; |
| 023.40.1600 Slewing Bearing | D1 ≈:86.3 mm; Limiting speed:8000 r/min; Mass bearing:0.54 kg; s max.:1 mm; db min.:68 mm; r3,4 min.:1.1 mm; Da max.:91 mm; B:21 mm; D:100 mm; da max.:64 mm; |
| R9-63N3 Crossed Roller Slewing Rings With Internal Gear | P150°:185 kN; Cap bolt recommended tightening torque:2467.6 N·m; P180°:222 kN; H2:85.725 mm; P60°:557 kN; Ca:107.798 mm; P90°:334 kN; Da:359.999 mm; A1:203.2 mm; N1:34.925 mm; |
| YRT260 Rotary Table Bearings (260x385x55mm) Turntable Bearing | Basic Static Radial Load Rating Co:86500 N; B:26.00 mm; Basic Dynamic Radial Load Rating C:85800 N; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; Grease Speed Rating Open/Shielded n1:3700 rpm; D:140.0000 mm; d:80.000 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; |
| KOBELCO SK09 EXCAVATOR SLEWING RING, SWING BEARING, SWING CIRCLE | D:90.0000 mm; Oil Speed Rating n2:7200 rpm; Basic Static Radial Load Rating Co:67000 N; d:40.000 mm; Grease Speed Rating n1:6000 rpm; Fillet Radius rb:1.00 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:79300 N; B:46.00 mm; |
| 208-25-61100 Swing Bearing For Komatsu PC450-6K Excavator | Fillet Radius ra:1.50 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:4500 rpm; D:125.0000 mm; Basic Dynamic Radial Load Rating C:112000 N; B:48.00 mm; d:70.000 mm; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:112000 N; |
| 55 mm x 100 mm x 21 mm Cross Roller Bearings Harmonic Drive Bearings BCSG-65 (44x210x39)mm | D:62.0000 mm; d:30.000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:7000 rpm; Accessories:Two Shields; Oil Speed Rating n2:9500 rpm; Sealed Speed Rating n3:7000 rpm; Basic Dynamic Radial Load Rating C:28600 N; B:27.00 mm; Basic Static Radial Load Rating Co:20400 N; Size (mm):55 mm x 100 mm x 21 mm ; |
| L6-25P9Z Four-point Contact Ball Slewing Bearings | Stabilizing ring:2 x 38151-38; J max.:488.95 mm; End plug (suffix Y):EPR 21; P150°:78.3 kN; P180°:94.3 kN; PG:1/4 NPT; N1:28.575 mm; Pa:40 kN; Cap bolt, SAE grade:5; Ca:89.789 mm; |
| RB17020UU High Precision Cross Roller Ring Bearing | B:20.00 mm; Basic Dynamic Radial Load Rating C:39100 N; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:34500 N; D:90.0000 mm; Oil Speed Rating Open/Shielded n2:7000 rpm; d:50.000 mm; Grease Speed Rating Open/Shielded n1:5700 rpm; Accessories:Two Shields; |
797/600G2 Bearing 600x900x125mm Video