| 230.20.0500.503 Four Contact Ball Slewing Ring 434x648x56mm | Appropriate attachment bolt size G:1 in; Cap bolt:4 x 3/4-10 UNC; Pa:46.3 kN; Mass pillow block:137 kg; Stabilizing ring:SR-36-30; P60°:234 kN; Da:319.999 mm; Adapter sleeve assembly:SNW 36x6.3/8; P150°:75.6 kN; End plug (suffix Y):EPR 19; |
| Slewing Ring For Excavator HITACHI EX270-5, Part Number:9154037 | H:222.25 mm; Housing:FSAF 617; Cap bolt recommended tightening torque:515.2 N·m; RG:3/8 NPT; A1:111.125 mm; L:387.35 mm; ba:52.388 mm; J1:60.325 mm; P90°:62.3 kN; Bearing:1317 K; |
| R9-63N3 Crossed Roller Slewing Rings With Internal Gear | P150°:185 kN; Cap bolt recommended tightening torque:2467.6 N·m; P180°:222 kN; H2:85.725 mm; P60°:557 kN; Ca:107.798 mm; P90°:334 kN; Da:359.999 mm; A1:203.2 mm; N1:34.925 mm; |
| RB10016UU High Precision Cross Roller Ring Bearing | a:19.695 mm; Basic static load rating C0:125 kN; Basic dynamic load rating C:89.7 kN; Fatigue load limit Pu:14 kN; Cb min.:4 mm; d1 ≈:94.8 mm; db min.:88.5 mm; Da min.:102 mm; d:80 mm; Ca min.:4 mm; |
| 797/1060G2 Slewing Bearing | r3,4 min.:0.3 mm; Calculation factor f2B:1.04; Reference grease quantity Gref:2.85 cm³; Basic dynamic load rating C:19.5 kN; Attainable speed for grease lubrication:13000 r/min; Fatigue load limit Pu:0.68 kN; Calculation factor f1:0.98; Ball diameter Dw:7.938 mm; Calculation factor f2A:1; d:65 mm; |
| RU228GUU P5 Precision Cross Roller Bearing | A1:149.225 mm; Cap bolt, SAE grade:8; da:140 mm; P150°:66.7 kN; Eye bolt:3/8-16 UNC; Cap bolt:4 x 3/4-10 UNC; Labyrinth ring (db shaft position):LOR 144; dc:134.938 mm; Ca:92.939 mm; H:298.45 mm; |
| 130.32.1120 Slewing Bearing | Max. speed for PosiTrac Plus seal:1950 r/min; Labyrinth ring:2 x LOR 52; Ca:45.796 mm; Adapter sleeve assembly:SNW 17x2.7/8; PG:1/8 NPT; J1:53.975 mm; RG:3/8 NPT; End plug (suffix Y):EPR 9; R2:22.225 mm; L:330.2 mm; |
| RB8016UUCC0 High Precision Cross Roller Ring Bearing | Basic Static Radial Load Rating Co:15300 N; Dimension N:21.0 mm; Dimension A1:27.0 mm; Width A:45.0 mm; Dimension N1:14.0 mm; Distance JMIN:119.0 mm; Dimension L:164.0 mm; Insert Bearing IB:Stainless Steel; Dimension H1:47.6 mm; Shaft Diameter D:35 mm; |
| 011.45.1250 Slewing Bearing | Basic dynamic load rating C:3800 kN; Da max.:602 mm; Limiting speed:1100 r/min; D:620 mm; Ca min.:2.2 mm; Mass bearing:150 kg; Operating clearance factor k2:0.1; da max.:513 mm; B:150 mm; D1 ≈:571 mm; |
| Excavator Slewing Ring For PC600-7K, Part Number:21M-25-11100 | B:19.00 mm; Oil Speed Rating Max. n2:65000 rpm; D:28.5800 mm; d:9.530 mm; Keyway f:1.6 mm; Oil Mist Speed Rating Max. n3:80000 rpm; Keyway e:9.9 mm; X-L-O Part Number:20-107; Preload:0 lb; Grease Speed Rating Max. n1:40000 rpm; |