| No. | Brand | C | K | A | T | a | G | h | b |
| 17580 | Timken | - | - | - | - | - | - | - | - |
| NH4Cl | - | - | - | - | - | - | - | - | - |
| 6008-2RS1C3HT51 | SKF | - | - | - | - | - | - | - | - |
| 4pcs | - | - | - | - | - | - | - | - | - |
| 18mm | INA | - | - | - | - | - | - | - | - |
| SL18-2952 | - | - | - | - | - | - | - | - | - |
| 28mm | - | - | - | - | - | - | - | 28.575 mm | - |
| (4) | - | - | - | - | - | - | - | - | - |
| D3W3CNJP-30 | Parker | - | - | - | - | 19 mm | - | - | - |
| 20X32X7 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 4JG1 | - | - | - | - | - | - | - | - | - |
| 10pcs6203zz | - | - | - | - | - | - | - | - | - |
| 1200 | - | - | 7.5 mm | - | 112 mm | - | - | - | - |
| 306 | Timken | - | - | - | - | - | - | - | - |
| A216-WCB | - | 21 mm | - | - | - | - | - | - | - |
| 4WE | Rexroth | - | - | - | - | - | - | 28.575 mm | - |
| 603zz | - | - | - | - | - | - | - | - | - |
| N46% | - | - | - | - | - | - | - | 61.119 mm | - |
| 20X37X9 | - | - | - | - | - | - | M 85x2 | 3.5 mm | 8 mm |
| 7778-18-9 | - | - | - | - | - | - | - | - | - |
| 50kg | - | - | - | - | 405 mm | - | - | - | - |
| 7202 | NSK | - | - | - | - | - | - | 51.594 mm | - |
| IR-384828 | koyo | - | - | - | - | - | - | - | - |
| RF900 | - | - | - | - | - | - | - | - | - |
| ME202620 | INA | - | - | - | - | - | - | - | - |
| 7003CTRDUMP4Y | NSK | - | - | - | - | - | - | - | - |
| 112.40.2240 Slewing Bearing | da min.:7.7 mm; r1,2 min.:0.3 mm; d:6 mm; Da max.:15 mm; Reference speed:95000 r/min; D:17 mm; Basic dynamic load rating C:1.95 kN; D2 ≈:14.8 mm; Fatigue load limit Pu:0.036 kN; Limiting speed:60000 r/min; |
| Slewing Ring For Excavator KOBELCO SK480LC-6E, Part Number:LS40F00003F1 | J1:95.25 mm; H:336.55 mm; P60°:226 kN; Appropriate attachment bolt size G:1 in; P180°:94.3 kN; P90°:136 kN; Initial grease fill:793.8 g; Taconite seal:TER 116; N1:28.575 mm; P150°:78.3 kN; |
| S14-90E1 Angular Contact Ball Slewing Rings With External Gear | B:32 mm; l4 max.:199 mm; Specific dynamic load factor K:100 N/mm²; d:45 mm; d2 max.:104 mm; d4 ≈:65 mm; G:M 42x3; C1 max.:28 mm; Basic static load rating C0:224 kN; l5 ≈:30 mm; |
| 9E-1B60-2020-1240 Four Point Contact Ball Slewing Ring | Mass bearing:22 kg; Calculation factor kr:0.1; s max.:3.5 mm; D1 ≈:506 mm; da min.:451 mm; Da max.:529 mm; d:440 mm; d1 ≈:474 mm; Calculation factor Y:0.6; r1,2 min.:2.1 mm; |
| 123.28.1120 Slewing Bearing | T:98 mm; D:150 mm; r3,4 min.:2 mm; ra max.:2 mm; r5 min.:0.6 mm; Basic dynamic load rating C:606 kN; b:10 mm; Ca min.:7 mm; Calculation factor Y0:1.6; Basic static load rating C0:850 kN; |
| NRXT2508 High Precision Cross Roller Ring Bearing | Threads per inch:8; d3 max.:204.927 mm; B:26.441 mm; Lock nut:AN 32; Hydraulic nut:HMVC 32E; B4:30.15 mm; Sleeve:S 32x5.3/8; Mass adapter sleeve assembly:7.05 kg; Lock washer:W 32; d1:136.525 mm; |
| CRBF 2512 AT Crossed Roller Slewing Ring 25x80x12mm With Mounting Hole | Mass bearing:42.5 kg; D:440 mm; Reference speed:300 r/min; Basic static load rating C0:7200 kN; d1:435 mm; r1,2 min.:3 mm; Limiting speed:600 r/min; Da max.:348 mm; Fatigue load limit Pu:530 kN; B:28.5 mm; |
| NRXT50050E Crossed Roller Bearing 500x625x50mm | D1 ≈:863 mm; D:980 mm; B:300 mm; B5:110 mm; Limiting speed:560 r/min; d1:560 mm; Reference speed:320 r/min; Basic static load rating C0:18000 kN; r1,2 min.:7.5 mm; Fatigue load limit Pu:1100 kN; |
| 134.25.700 Slewing Beairng | B1:53.086 mm; B4:15.9 mm; B:14.554 mm; d1:58.737 mm; d3 max.:85.852 mm; Hydraulic nut:HMVC 13E; Sleeve:S 13x2.5/16; Mass adapter sleeve assembly:0.64 kg; d:65 mm; Lock washer:W 13; |
| VLU200544 Four Point Contact Slewing Ring Bearing | Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:255000 N; Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:255000 N; Accessories:One Shield & Snap-Ri; d:100.000 mm; D:215.0000 mm; B:82.60 mm; Sealed Speed Rating n3:1800 rpm; Fillet Radius ra:2.50 mm; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
RB1250110 Crossed Roller Bearing Video