No. | Brand | C | K | A | T | a | G | h | b |
EK-089 | - | - | - | - | - | - | - | - | - |
4WRZ | Rexroth | - | - | - | - | 19.695 mm | - | - | - |
1700 | - | - | - | - | - | - | - | - | - |
ZX330LC-3 | INA | - | - | - | - | - | - | - | 17 mm |
QT33-16-A | - | - | - | - | - | - | - | - | - |
N21% | - | - | - | - | - | - | - | - | - |
20.5% | - | - | - | - | - | - | - | - | - |
SK200-8 | - | - | - | - | - | - | - | - | - |
6914 | NTN | - | - | - | - | - | - | 36.513 mm | - |
10pcs | - | - | - | - | - | - | - | - | - |
9150472 | - | - | - | - | - | - | - | - | 10 mm |
A2F | - | - | - | 114.3 mm | - | - | - | - | - |
23156CC/W33 | - | - | - | - | - | - | - | - | - |
R80 | - | - | - | - | - | - | - | - | - |
2-Time | - | - | - | - | - | - | - | - | - |
512006 | Timken | - | - | - | - | - | - | - | - |
GT225 | John Deere | - | - | - | - | - | - | - | - |
H7012AC-2RZ | - | 76.2 mm | - | - | 120.65 mm | - | - | - | - |
21% | - | - | - | - | - | - | - | - | - |
209KDD | FAFNIR | - | - | - | - | - | - | - | - |
6313-2RS1 | SKF | - | - | - | - | - | - | - | - |
(2 | - | - | - | - | - | - | - | - | - |
311B | - | - | - | - | - | - | - | - | - |
P2 | - | - | - | - | - | - | - | 210 mm | - |
50lpm | - | - | - | - | - | - | - | - | - |
GTFE12-00-260 | - | - | - | - | - | - | - | - | - |
6908-2RS | - | - | - | - | - | - | - | - | - |
C0605 | - | 37 mm | - | - | - | 38.407 mm | - | - | - |
(ACS1-L25) | - | - | - | - | - | - | - | - | - |
R8-39E3 Crossed Roller Slewing Rings With External Gear | Basic Static Radial Load Rating Co:18600 N; B:19.00 mm; Accessories:One Shield & Snap-Ri; D:72.0000 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Basic Dynamic Radial Load Rating C:29200 N; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; d:20.000 mm; |
CRBC 13025 Crossed Roller Bearings 130x190x25mm Industrial Robots Arm Use | Appropriate attachment bolt size G:0.75 in; Cap bolt, SAE grade:8; H:244.475 mm; Bearing:23026 CCK/W33; Adapter sleeve assembly:SNW 3026x4.7/16; P150°:59.6 kN; da:112.713 mm; Eye bolt:2 x 3/8-16 UNC; J min.:320.675 mm; A1:120.65 mm; |
NRXT11020E Crossed Roller Bearing 110x160x20mm | B1:326 mm; G:Tr 900x7; d:900 mm; B5:125 mm; Mass adapter sleeve assembly:328 kg; G3:13 mm; d1:850 mm; B:100 mm; G2:G 1/8; Locking device:MS 30/900-850; |
RKS.21 0841 Light Series Four-point Contact Ball Slewing Bearing With External Gear | RG:1/2 NPT; H1:152.4 mm; Housing:SAF 526; S:4.763 mm; Ca:73.787 mm; h:59.531 mm; H:295.275 mm; da:112.713 mm; L:466.725 mm; Appropriate attachment bolt size G:0.875 in; |
PS132 Bearings | D:120.0000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:56000 N; Basic Dynamic Radial Load Rating C:79300 N; B:29.00 mm; Oil Speed Rating n2:6300 rpm; d:55.000 mm; Grease Speed Rating n1:4800 rpm; |
L9-42E9Z Four-point Contact Ball Slewing Rings With External Gear | h:38.1 mm; RG:3/8 NPT; A1:98.425 mm; Taconite seal:TER 187; Housing:SAF 518; J max.:298.45 mm; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Mass pillow block:21.4 kg; Da:160 mm; |
VSA200844-N Slewing Bearing 772x950.1x56mm | Accessories:Two Shields; Basic Dynamic Radial Load Rating C:8320 N; B:9.00 mm; D:72.0000 mm; Sealed Speed Rating n3:5180 rpm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:8500 rpm; Oil Speed Rating Open/Shielded n2:10000 rpm; d:55.000 mm; Basic Static Radial Load Rating Co:7350 N; |
HS6-33E1Z Slewing Bearings (28.83x37.2x2.2inch) With Internal Gear | B5:125 mm; h:25 mm; d1:1025 mm; Lock washer / Locking clip:MS 30/950; b:60 mm; Mass lock nut:124 kg; Associated eyebolt for handling:M 16; B:100 mm; d2:985 mm; G:Tr 950x8; |
VLI200844N Slewing Bearings (736x948x56mm) Turntable Bearing | Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:43000 N; d:30.000 mm; Basic Dynamic Radial Load Rating C:46800 N; B:33.30 mm; D:72.0000 mm; Grease Speed Rating n1:6300 rpm; Oil Speed Rating n2:8500 rpm; Sealed Speed Rating n3:6300 rpm; Accessories:Shield & Seal & Snap; |
24100N7441F1 Swing Bearing For KOBELCO SK220LC III Excavator | Mass housing:595 kg; Initial grease fill, 20%:7.8 kg; J:950 mm; Lock washer:MS 3172-68; s:30 mm; Locating ring:2 x FRB 10/650; N1:48 mm; Labyrinth seal:2 x TS 80/390; bc:223.5 mm; P150°:2700 kN; |
RU 297 UU Crossed Roller Bearing 210x380x40mm Video