No. | Brand | C | K | A | T | a | G | h | b |
Brp30 | - | - | - | - | - | - | - | - | - |
SK350-8 | - | - | - | - | - | - | Tr 420x5 | - | 22.3 mm |
16030m | - | - | - | - | - | - | - | - | - |
120C | - | - | - | - | - | - | - | - | - |
10 | SKF | - | - | - | 600 mm | - | - | - | - |
50x90x20 | - | - | - | - | - | - | - | - | - |
A11vlo260 | - | - | - | - | - | - | - | - | - |
EE130901D | Timken | - | - | - | - | 40.331 mm | - | - | - |
320x440x90 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
5/10/50pcs | - | - | - | - | - | - | - | - | - |
6801 | - | - | - | - | - | - | - | - | - |
6811 | - | - | - | - | - | - | - | - | - |
33122JR | - | - | - | - | - | - | - | - | - |
7783-20-2 | - | - | - | - | - | - | - | - | - |
3MM204WI | FAFNIR | - | - | - | - | - | - | - | - |
C4122V/C3 | SKF | - | - | - | - | 22.8 mm | - | - | - |
4] | - | - | - | - | - | - | - | - | - |
EX200 | Hitachi | - | - | - | - | - | - | - | mm |
HCD802U | - | - | - | - | - | - | - | - | - |
GNX250 | - | - | - | - | - | - | - | - | - |
170x260x67 | - | - | - | - | - | - | - | - | - |
38mm | - | - | - | - | - | - | 359.918 mm | - | - |
211468 | - | - | - | - | - | - | - | - | - |
22206CK | NSK | - | - | - | - | - | - | - | - |
350 | NTN | - | - | - | - | - | - | - | - |
111.25.500 Slewing Bearing | Reference speed:110 r/min; Calculation factor e:0.35; Mass bearing:3535 kg; B:545 mm; Da max.:1452 mm; r1,2 min.:12 mm; d2 ≈:1102 mm; Calculation factor Y0:1.8; D:1500 mm; Basic static load rating C0:55000 kN; |
Wind Power Slewing Bearing 013.40.1926.03 Single Row Ball Wind Turbine Slewing Bearing | L:628.65 mm; H2:69.85 mm; P60°:234 kN; A2:319.087 mm; Ca:95.809 mm; PG:1/4 NPT; Eye bolt:2 x 3/8-16 UNC; J1:107.95 mm; Stabilizing ring:2 x 38151-40; Da:309.999 mm; |
RE4510 Cross Roller Bearing 45x70x10mm | Labyrinth ring:2 x LOR 189; R2:28.575 mm; Bearing:1318 K; ba:42.069 mm; P120°:48.9 kN; Cap bolt recommended tightening torque:515.2 N·m; L:393.7 mm; Adapter sleeve assembly:SNW 18x3.1/4; P150°:44.5 kN; Appropriate attachment bolt size G:0.75 in; |
RB18025 Cross Roller Bearings 180*240*25mm | Oil Speed Rating Open/Shielded n2:32000 rpm; Basic Dynamic Radial Load Rating C:5070 N; D:28.0000 mm; B:8.00 mm; Accessories:Shield & Seal; Basic Static Radial Load Rating Co:2360 N; d:12.000 mm; Fillet Radius ra:0.30 mm; Sealed Speed Rating n3:17000 rpm; Grease Speed Rating Open/Shielded n1:26000 rpm; |
CRBH9016 Cross Roller Bearing 90x130x16mm | Basic Static Radial Load Rating Co:44000 N; Oil Speed Rating Open/Shielded n2:4800 rpm; Sealed Speed Rating n3:2500 rpm; d:110.000 mm; Grease Speed Rating Open/Shielded n1:4000 rpm; Accessories:Without Accessories; Fillet Radius ra:1.00 mm; B:20.00 mm; Basic Dynamic Radial Load Rating C:43600 N; D:150.0000 mm; |
I.562.25.15.D.1 Bearings | d4 max.:30 mm; Material constant KM:330; Tightening torque bolt with internal hexagon:25 N·m; d:25 mm; α:7 °; r1 min.:0.6 mm; Size bolt with internal hexagon:M 8; d2 max.:65 mm; B:20 mm; C1 max.:17 mm; |
SD.505.20.00.C Four Contact Ball Slewing Ring 304x518x56mm | Cap bolt recommended tightening torque:515.2 N·m; H1:152.4 mm; Bearing limiting speed:3600 r/min; R1:79.375 mm; A1:130.175 mm; J1:82.55 mm; P150°:118 kN; S:4.763 mm; Bearing:22226 EK; Eye bolt:2 x 3/8-16 UNC; |
NRXT4010E Crossed Roller Bearing 40x65x10mm | Type:300-RDM Series (from; d:130.000 mm; Fillet Radius ra:3.00 mm; B:58.00 mm; Basic Radial Load Rating-Static SCO:345000 N; Basic Radial Load Rating-Dynamic DC:296000 N; D:280.0000 mm; Speed Rating-Open and Shielded-Grease OSG:5300 rpm; Fillet Radius rb:1.00 mm; Speed Rating-Open and Shielded-Oil OSO:7800 rpm; |
232.20.0900.503 Four Contact Ball Slewing Ring 842x1048x56mm | G:M 27x2; r1 min.:0.6 mm; h1:105 mm; Material constant KM:330; Mass rod end:2.4 kg; Basic static load rating C0:146 kN; l7 min.:45 mm; Basic dynamic load rating C:100 kN; Tightening torque bolt with internal hexagon:45 N·m; dk:53 mm; |
Komatsu PC60-7 Excavator Slewing Bearing | r3,4 min.:1 mm; Calculation factor f0:9.6; r1,2 min.:1.5 mm; Calculation factor f2C:1.05; d:90 mm; a:27.5 mm; Attainable speed for grease lubrication:15500 r/min; Preload class C GC:1150 N; Preload class A GA:190 N; da max.:107.6 mm; |
RU 445G Crossed Roller Bearing 350x540x45mm Video