| No. | Brand | C | K | A | T | a | G | h | b |
| 100% | - | - | - | - | - | - | - | - | - |
| 6005 | Nachi | - | - | - | - | - | - | - | - |
| PSR5 | - | - | - | - | - | - | M 42x3 | - | - |
| 8/10/12/15/17/20/25/30/35/50/70mm | - | - | - | - | - | - | - | - | - |
| npk12-2-5+23% | - | - | - | - | - | - | - | - | - |
| 14oz | - | - | - | - | - | - | - | - | - |
| 1.5X4X1.2 | - | - | - | - | - | - | - | 38.1 mm | - |
| YB60000571 | - | - | - | - | - | 81 mm | - | - | - |
| 32% | - | - | - | - | - | - | - | - | - |
| 4T-28580 | NTN | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 30% | - | 787.4 mm | - | - | - | - | - | - | 22.3 mm |
| NPR71 | - | - | - | - | 48.5 mm | - | - | - | - |
| 3'x6' | - | - | - | - | - | - | - | 40.481 mm | - |
| SPB24OPN | Thomson | - | - | - | - | - | - | - | - |
| K3V63BDT | - | - | - | - | 106 mm | - | - | - | - |
| TM09 | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 14" | - | 22 mm | - | - | 27.25 mm | - | - | - | - |
| S90 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | 80 mm | - | - | - | - | - |
| 7324 | - | - | - | - | - | - | - | - | - |
| 0TX4608 | - | - | - | - | - | - | - | - | - |
| AH06 | - | - | - | - | - | - | - | - | - |
| 6908-2RS | - | - | - | - | - | - | - | - | - |
| (DC-160) | - | - | - | - | - | - | - | - | - |
| VLA201094N Slewing Bearing S-upplier Made In China 984x1198.1x56mm | Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:168000 N; B:71.40 mm; Sealed Speed Rating n3:2600 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:140000 N; Accessories:Two Seals; d:75.000 mm; D:160.0000 mm; Grease Speed Rating n1:2600 rpm; |
| Excavator Slewing Ring For CATERPILLAR 330D, Part Number:227-6089 | 2B:130 mm; Da max.:303.5 mm; ra max.:4 mm; r5 min.:1.5 mm; Limiting speed:2000 r/min; K:10 mm; D:320 mm; Ca min.:9 mm; Da min.:273 mm; Calculation factor Y1:1.9; |
| 4789/560 Slewing Bearing | Basic Dynamic Radial Load Rating C:39300 N; Fillet Radius ra:1.00 mm; d:45.000 mm; D:85.0000 mm; Accessories:Without Accessories; B:19.00 mm; Basic Static Radial Load Rating Co:32500 N; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; |
| 20Y-25-11300 Swing Bearing For Komatsu PC240LC-5K Excavator | Calculation factor Y1:1.6; T:65 mm; rc max.:0.6 mm; r5 min.:0.6 mm; Da min.:140 mm; D:160 mm; K:4.5 mm; Basic static load rating C0:490 kN; Calculation factor e:0.43; Mass bearing pair:5.19 kg; |
| L9-46P9Z Four-point Contact Ball Slewing Bearings | Calculation factor Y0:2.8; B2:19 mm; b:6 mm; Basic static load rating C0:325 kN; Basic dynamic load rating C:291 kN; Calculation factor e:0.22; d2 ≈:98.2 mm; B:44 mm; da max.:98 mm; db min.:90 mm; |
| Produce CRB600120 Crossed Roller Bearing,CRB600120 Bearing Size 600X870X120mm | Basic Dynamic Radial Load Rating C:55300 N; Basic Static Radial Load Rating Co:64000 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:13000 rpm; d:110.000 mm; Grease Speed Rating n1:9200 rpm; B:20.00 mm; Fillet Radius rb:0.60 mm; D:150.0000 mm; |
| VLU301455 Four Contact Ball Slewing Ring 1305x1600x90mm | Adapter sleeve assembly:SNW 11x1.7/8; Bearing limiting speed:7500 r/min; Labyrinth ring:2 x LER 23; P60°:35.6 kN; Initial grease fill:136.08 g; Cap bolt recommended tightening torque:149.1 N·m; L:279.4 mm; P150°:12 kN; Cap bolt, SAE grade:8; A2:123.825 mm; |
| DH290 Slewing Bearing | Limiting speed:1400 r/min; da min.:468 mm; a:382 mm; Calculation factor Y2:1.07; Fatigue load limit Pu:45.5 kN; Calculation factor X:0.6; Mass bearing:115 kg; D1 ≈:577 mm; D:650 mm; Basic static load rating C0:2500 kN; |
| VRT 2095A Cross Roller Table 30x95x12mm | Accessories:One Shield & Snap-Ri; D:62.0000 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; B:17.00 mm; Basic Dynamic Radial Load Rating C:21200 N; Oil Speed Rating n2:14000 rpm; Basic Static Radial Load Rating Co:10800 N; Grease Speed Rating Open/Shielded n1:11000 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:11000 rpm; |
| 112.36.1250.03 Bearing 1085x1475x110mm | D:42.0000 mm; B:12.00 mm; Basic Static Radial Load Rating Co:5000 N; Fillet Radius ra:0.64 mm; Oil Speed Rating Open/Shielded n2:20000 rpm; Basic Dynamic Radial Load Rating C:9360 N; Sealed Speed Rating n3:11000 rpm; Accessories:Shield & Seal; Grease Speed Rating Open/Shielded n1:17000 rpm; d:20.000 mm; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
RU 178 UUCC0 Crossed Roller Bearing 115x240x28mm Video