No. | Brand | C | K | A | T | a | G | h | b |
CR250RA | NTN | - | - | - | - | - | - | - | 22.3 mm |
YZ85 | - | - | - | - | - | - | - | - | - |
V10 | - | - | - | 12 mm | - | - | Tr 750x7 | - | - |
Sk200-8 | - | - | - | - | - | - | - | - | - |
500044010 | - | 26 mm | - | - | - | - | - | - | - |
76.90 | - | - | - | - | - | - | - | - | - |
0510110302 | Rexroth | 15.5 mm | - | - | 20 mm | 17 mm | - | - | - |
6008 | SKF | - | - | - | - | - | - | 31 mm | - |
500mg/H | - | - | - | - | - | - | - | - | 16.7 mm |
1306 | - | - | - | 84.138 mm | - | 5.556 mm | - | - | - |
20x27x4 | - | - | - | - | - | - | - | - | mm |
EX120-5 | Hitachi | - | - | - | - | - | - | - | - |
1K10-6-12 | Parker | - | - | - | - | - | - | - | - |
155-800rpm | - | - | - | - | - | - | - | - | - |
204SZZ | - | - | - | - | - | - | - | - | - |
8-18%) | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
4-SKF | SKF | - | - | - | - | - | - | 150 mm | - |
607-2RSH, | SKF | - | - | - | - | - | - | - | - |
21% | - | - | - | - | - | - | - | - | - |
483 | - | - | - | - | - | - | - | - | - |
B6 | - | - | 5 mm | - | - | - | - | - | - |
NJ230-E-M1 | fag | - | - | - | - | - | - | - | - |
3 | - | - | - | - | - | - | - | - | - |
TD370W | - | - | - | - | - | - | - | - | - |
NA4905-RSR | - | - | - | - | - | - | - | - | - |
6203LLU | NTN | - | - | - | - | - | - | - | - |
R57 | - | - | - | - | - | - | - | - | - |
312 | TRW | - | - | - | - | - | M 45x1.5 | 2.5 mm | - |
ISO4706 | - | - | - | - | - | - | - | - | - |
209-25-71101 Swing Bearing For Komatsu PC750SE-6K Excavator | b:22.3 mm; Reference speed:750 r/min; Calculation factor Y1:1.9; Calculation factor Y0:1.8; da min.:320 mm; Fatigue load limit Pu:425 kN; Mass bearing:185 kg; ra max.:4 mm; d:300 mm; Calculation factor e:0.35; |
KH-325E Slewing Bearings (28.5x36.667x2.5inch) Machine Tool Bearing | H2:60.325 mm; Cap bolt recommended tightening torque:813.5 N·m; A2:193.675 mm; Labyrinth ring:2 x LOR 140; P180°:127 kN; R2:38.1 mm; R1:87.313 mm; End plug (suffix Y):EPR 18; h:44.45 mm; Pa:34 kN; |
RB20035UU High Precision Cross Roller Ring Bearing | Design (sliding contact surface combination):Steel/steel, heavy-d; D:35 mm; Basic static load rating C0:146 kN; Specific dynamic load factor K:100 N/mm²; Mass plain bearing:0.073 kg; α:6 °; da max.:24 mm; b1:3.1 mm; Basic dynamic load rating C:30 kN; d:20 mm; |
RA8008UU High Precision Cross Roller Ring Bearing | d:120.000 mm; D:215.0000 mm; Basic Static Radial Load Rating Co:53000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:119000 N; Grease Speed Rating n1:2800 rpm; B:42.00 mm; Oil Speed Rating n2:3400 rpm; |
011.60.2500 Slewing Bearing | Fillet Radius ra:2.00 mm; B:28.00 mm; Fillet Radius rb:1.00 mm; D:160.0000 mm; Basic Static Radial Load Rating Co:86500 N; d:100.000 mm; Basic Dynamic Radial Load Rating C:85200 N; Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:2600 rpm; |
060.20.0844.500.01.1503 Slewing Ring Bearings For Turntables | L:244.475 mm; Cap bolt recommended tightening torque:81.3 N·m; Mass pillow block:7.85 kg; H1:69.85 mm; Bearing:22211 EK; Initial grease fill:39.69 g; J max.:209.55 mm; Ventilation fitting:38174-12; P90°:27.1 kN; Cap bolt, SAE grade:5; |
CRBA25030 Cross-Roller Ring (250x330x30mm) Rotary Units Of Manipulators Use | da min.:68.3 mm; Specific static load factor K0:300 N/mm²; da max.:72.3 mm; Da max.:94.7 mm; r1 min.:0.6 mm; Basic static load rating C0:1040 kN; C:47.625 mm; Da min.:87 mm; b1:8 mm; B:55.55 mm; |
123.40.2800 Slewing Bearing | B1:237 mm; D:700 mm; Da max.:677 mm; Mass bearing + sleeve:275 kg; D1 ≈:640 mm; Operating clearance factor k2:0.11; da max.:586 mm; Fatigue load limit Pu:530 kN; B5:77 mm; Reference speed:670 r/min; |
RU66 Cross Roller Bearing 35x95x15mm | Bearing:22220 EK; ba:44.45 mm; Da:180 mm; Cap bolt:5/8-11 UNC; P90°:84.5 kN; Cap bolt recommended tightening torque:298.3 N·m; Initial grease fill:181.44 g; PG:1/4 NPT; Ca:55.804 mm; Housing:SAFS 520; |
XU060094 Cross Roller Bearings,XU060094 Bearings SIZE 57x140x26mm | Distance H:1.250 in; Shaft Diameter D:1 7/16 in; Insert Bearing IB:Stainless Steel; Dimension L:3.8125 in; Basic Dynamic Radial Load Rating:4560 lbf; Pin Dia BS:1/2; Diameter G:0.5313 in; Dimension C:2.3750 in; Dimension F:0.5625 in; Weight W:1.34 lb; |
VLI200744N Slewing Bearings (648x848x56mm) Turntable Bearing Video