| No. | Brand | C | K | A | T | a | G | h | b |
| 1-3mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | 51 mm | - | - | - |
| CL2B-DA08 | - | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| 209KDD | FAFNIR | - | - | - | - | - | - | - | - |
| EMC0512 | - | - | - | - | 22 mm | - | - | - | - |
| SH300-2 | INA | - | - | - | - | - | - | - | - |
| 1/2 | - | - | - | - | - | - | - | - | - |
| 6316-2RS | - | - | - | - | - | - | M 4 | - | - |
| 4X8 | INA | 3.71 mm | - | - | - | - | - | - | 3.1 mm |
| 606 | - | - | - | - | - | - | - | - | - |
| nh4cl | - | - | - | - | - | - | - | - | - |
| F247 | - | - | - | - | - | - | - | - | - |
| H12WXBBL49D | Parker | - | - | - | - | - | M 30x1.5 | 2 mm | 5 mm |
| 100% | - | - | - | - | - | - | - | - | - |
| KA035AR0 | RBC | - | - | - | - | - | - | - | - |
| LM11949 | Bower | - | - | - | - | - | - | - | - |
| Z400 | - | - | - | - | - | - | - | - | - |
| 3x | - | - | - | - | - | 140 mm | - | - | 8.5 mm |
| GM02 | - | - | - | - | - | - | - | - | - |
| 9E-1B40-0691-1149 Four Point Contact Ball Slewing Ring | Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; D:290.0000 mm; B:46.00 mm; Sealed Speed Rating n3:1400 rpm; Grease Speed Rating Open/Shielded n1:2000 rpm; Basic Dynamic Radial Load Rating C:195000 N; Basic Static Radial Load Rating Co:216000 N; Accessories:Two Shields; d:190.000 mm; |
| RB2508UU High Precision Cross Roller Ring Bearing | Fatigue load limit Pu:12.5 kN; Ew:46 mm; Limiting speed:12000 r/min; Fw:38 mm; Mass needle roller and cage assembly:0.076 kg; Basic static load rating C0:100 kN; Basic dynamic load rating C:52.3 kN; Reference speed:10000 r/min; U:32 mm; |
| RU148UUCC0 Crossed Roller Bearing 80x165x22mm | d2:152.4 mm; L:387.35 mm; Attachment bolt diameter G:19.05 mm; s:41.275 mm; B:116.681 mm; Basic dynamic load rating C:311 kN; da:101.6 mm; S:0.794 mm; J max.:333.375 mm; J min.:304.8 mm; |
| 013.75.4500 Slewing Bearing | D:679.45 mm; B:495.3 mm; Calculation factor Y2:3; Thrust factor K:1.76; r1,2 min.:3.3 mm; d1 ≈:520 mm; Basic static load rating C0:22400 kN; r3,4 min.:6.4 mm; Basic dynamic load rating C:8580 kN; Fatigue load limit Pu:1660 kN; |
| RE 11015 Crossed Roller Bearing 110x145x15mm | ra max.:6 mm; Ca min.:-11.7 mm; Da min.:706 mm; Operating clearance factor k2:0.116; D:830 mm; Fatigue load limit Pu:850 kN; Basic dynamic load rating C:7500 kN; D1 ≈:738 mm; Mass bearing:540 kg; Limiting speed:750 r/min; |
| Offer Slewing Bearing For QY-50 Crane | Labyrinth ring (dc shaft position):LOR 122; da:130 mm; A2:203.2 mm; Lock washer:W 26; Bearing limiting speed:3600 r/min; End plug (suffix Y):EPR 27; R1:79.375 mm; S:4.763 mm; A1:130.175 mm; Pa:98.3 kN; |
| RK6-22P1Z Slewing Bearings (17.09x25.51x2.205inch) Turntable Bearing | P180°:37.8 kN; Initial grease fill:218.29 g; Da:150 mm; Bearing:1314; Pa:24.5 kN; L:330.2 mm; N1:22.225 mm; dc:66.675 mm; Cap bolt, SAE grade:8; Mass pillow block:18.2 kg; |
| RE60040 Cross Roller Bearing 600x700x40mm | Limiting speed:10000 r/min; D:120 mm; ra max.:2 mm; Reference speed:6700 r/min; db min.:75 mm; Da max.:108 mm; Mass bearing:1.88 kg; Limiting value e:0.2; B:29 mm; Basic dynamic load rating C:114 kN; |
| 014.30.560.12 Bearing 426.317x662x80mm | B:43.00 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; Basic Dynamic Radial Load Rating C:157000 N; Grease Speed Rating Open/Shielded n1:2800 rpm; Accessories:Without Accessories; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:160000 N; d:90.000 mm; D:190.0000 mm; |
| XR766051 Cross Tapered Roller Bearing 457.2x609.6x63.5mm | Basic Static Radial Load Rating Co:17000 N; B:16.00 mm; Basic Dynamic Radial Load Rating C:22900 N; d:30.000 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:11000 rpm; D:62.0000 mm; |
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
VSA200544N Slewing Bearings (472x640.3x56mm) Turntable Bearing Video