| No. | Brand | C | K | A | T | a | G | h | b |
| 1/4" | Danfoss | - | - | - | - | - | - | - | - |
| 2) | Parker | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| '00 | - | - | - | - | - | - | - | - | - |
| 2214-E2RS1TN9 | SKF | - | - | - | - | - | - | - | - |
| 7 | TRW | - | - | - | - | - | - | - | - |
| (8-7250CH) | - | - | - | - | - | - | - | - | - |
| HPV118HW-25A | Hitachi | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | 80 mm | - | - | - | - | - |
| 4W0788 | - | - | - | - | - | - | - | - | - |
| 626 | - | 33 mm | - | - | 42.25 mm | 33 mm | - | - | - |
| 4TNV84 | - | - | - | - | - | - | - | 46.038 mm | - |
| NJ408 | - | - | - | - | - | - | - | - | - |
| N21%, | - | - | - | - | 228.6 mm | - | - | - | - |
| XKAQ-00803 | - | - | - | - | - | - | - | - | - |
| 1985-2002 | Timken | - | - | - | - | - | Tr 220x4 | - | 22.3 mm |
| 3000PSI | Parker | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 510010 | Timken | - | - | 9 mm | - | - | Tr 380x5 | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| JTC2298 | TRW | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | M 35x1.5 | 2 mm | 5 mm |
| 10mm | - | - | 12 mm | - | - | - | - | - | - |
| CRB13025UUT1 High Precision Cross Roller Ring Bearing | Appropriate attachment bolt size G:0.75 in; h:31.75 mm; N1:23.813 mm; Da:140 mm; Cap bolt, SAE grade:8; H2:31.75 mm; PG:1/8 NPT; R2:21.431 mm; J min.:244.475 mm; Housing:SAFS 516; |
| 134.40.1250 Slewing Beairng | Grease Speed Rating n1:8500 rpm; Basic Static Radial Load Rating Co:20000 N; d:20.000 mm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; Oil Speed Rating n2:12000 rpm; Basic Dynamic Radial Load Rating C:23800 N; D:52.0000 mm; B:22.20 mm; Sealed Speed Rating n3:8500 rpm; |
| Slewing Ring For Excavator KOBELCO SK480LC-6E, Part Number:LS40F00003F1 | J1:95.25 mm; H:336.55 mm; P60°:226 kN; Appropriate attachment bolt size G:1 in; P180°:94.3 kN; P90°:136 kN; Initial grease fill:793.8 g; Taconite seal:TER 116; N1:28.575 mm; P150°:78.3 kN; |
| 123.32.1800 Slewing Bearing | Lock nut:HM 31/670; G3:13 mm; A:8 mm; Locking device:MS 31/670; d:670 mm; G:Tr 670x6; B1:456 mm; G2:G 1/8; d3:850 mm; Hydraulic nut:HMV 134E; |
| RA14008UU High Precision Cross Roller Ring Bearing | Coefficient of friction µ min.:0.08; a:3 mm; d:28 mm; D:40 mm; α:124 °; Tolerance housing:H7; Coefficient of friction µ max.:0.15; Permissible sliding velocity v max.:0.5 m/s; h:29 mm; Tolerance shaft:e7; |
| PC90-6 Slewing Bearing | Bearing:22236 CCK/W33; da:160.338 mm; N1:28.575 mm; A2:250.825 mm; P60°:234 kN; Cap bolt recommended tightening torque:203.4 N·m; Cap bolt, SAE grade:5; Stabilizing ring:SR-36-30; H1:190.5 mm; P150°:75.6 kN; |
| 120.50.3550 Slewing Bearing | Oil Mist Speed Rating Max. n3:12000 rpm; Oil Speed Rating Max. n2:8000 rpm; X-L-O Part Number:55-27; Preload:50 lb; Keyway f:1.6 mm; Keyway e:21.4 mm; D:50.8000 mm; B:25.40 mm; Grease Speed Rating Max. n1:5000 rpm; d:20.640 mm; |
| NRXT7013E Crossed Roller Bearing 70x100x13mm | r2s (min):0.6 mm; B:23 mm; r1s (min):1.5 mm; Dynamic (Ca):82.5 kN; T:25.25 mm; Static (Coa):94.4 kN; rs (min):2 mm; C:20 mm; D:90 mm; a:19 mm; |
| VU 140179 Four Point Contact Slewing Ring Slewing Bearing | l2 max.:349 mm; C1 max.:43 mm; B:49 mm; α:6 °; l1 min.:132 mm; h:265 mm; l7 min.:85 mm; r1 min.:1 mm; d:70 mm; Material constant KM:330; |
| 110.28.900 Slewing Bearing | Bearing:YAR 206-104-2RF/VE49; Recommended tightening torque for grub screw:4 N·m; Fatigue load limit Pu:0.475 kN; Mass bearing unit:0.6 kg; H2:40 mm; L:125 mm; A:34 mm; A2:30 mm; B4:5 mm; H1:89 mm; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
VSI250855N Slewing Bearings (710x955x80mm) Turntable Bearing Video