No. | Brand | C | K | A | T | a | G | h | b |
220g | - | - | - | - | - | - | - | - | 9 mm |
PC1250-8 | - | - | - | - | - | - | - | - | - |
SPB24OPN | Thomson | - | - | - | - | - | - | - | - |
3q | - | - | - | - | - | - | - | - | - |
11722 | - | 34 mm | - | - | 43 mm | - | - | - | - |
4x2 | John Deere | - | - | - | - | 247 mm | - | - | - |
3 | - | - | - | - | - | - | - | 46.038 mm | - |
900 | fag | - | - | - | - | - | - | - | - |
6000VV | Hitachi | - | 9 mm | - | - | - | - | - | 16.7 mm |
N314-E-TVP2-C3 | fag | - | - | - | - | - | - | - | - |
504 | - | - | - | - | - | - | - | - | - |
1200X1000X975mm | - | 172.65 mm | - | - | - | - | - | - | - |
2020 | - | - | - | - | - | - | - | - | - |
99.5% | - | - | - | - | - | - | - | - | - |
10t/H | - | - | - | - | - | - | - | - | - |
R20 | - | - | - | - | - | - | - | - | - |
22332 | - | - | - | - | 38 mm | - | - | - | - |
16329 | IKO | - | - | - | - | - | - | - | - |
2MM204WICRDUL | FAFNIR | - | - | - | - | - | - | - | - |
XV1000 | - | - | - | - | - | - | - | - | - |
23080CCK/W33 | - | - | - | - | - | - | - | - | - |
12300-60840-012 | - | - | - | - | - | - | - | - | - |
ZX450-3 | Hitachi | 85.725 mm | - | - | - | - | - | - | - |
Z250 | NTN | - | - | - | - | - | - | 28.575 mm | - |
24v | - | - | - | - | - | - | - | - | - |
50 | - | - | - | - | - | - | - | - | 9 mm |
HM911210 | Bower | 60.325 mm | - | - | - | - | - | - | - |
NCF1838V | - | - | - | - | - | - | 54.788 mm | - | - |
1PC | - | - | - | - | - | - | - | - | - |
00152, | Timken | - | - | - | - | - | - | - | - |
013.40.1200 Slewing Bearing | d:340.000 mm; Grease Speed Rating Open/Shielded n1:1100 rpm; D:460.0000 mm; Oil Speed Rating Open/Shielded n2:1400 rpm; B:56.00 mm; Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:415000 N; Sealed Speed Rating n3:700 rpm; Basic Dynamic Radial Load Rating C:281000 N; Accessories:Without Accessories; |
21M-25-11100 Swing Bearing For Komatsu PC600-6K Excavator | Basic Static Radial Load Rating Co:86500 N; Oil Speed Rating n2:4500 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Dynamic Radial Load Rating C:124000 N; Grease Speed Rating Open/Shielded n1:3800 rpm; D:170.0000 mm; B:39.00 mm; Sealed Speed Rating n3:2600 rpm; d:80.000 mm; Grease Speed Rating n1:3800 rpm; |
L9-42E9Z Four-point Contact Ball Slewing Rings With External Gear | h:38.1 mm; RG:3/8 NPT; A1:98.425 mm; Taconite seal:TER 187; Housing:SAF 518; J max.:298.45 mm; Cap bolt:2 x 5/8-11 UNC; Cap bolt recommended tightening torque:149.1 N·m; Mass pillow block:21.4 kg; Da:160 mm; |
Slewing Bearing For Komatsu PC350-7 Excavator | B:47.60 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:95200 N; Oil Speed Rating n2:5300 rpm; D:110.0000 mm; d:50.000 mm; Basic Static Radial Load Rating Co:95000 N; Sealed Speed Rating n3:4000 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:4000 rpm; |
VU360680 Slewing Bearings (565x795x79mm) Machine Tool Bearing | Mass rod end:14.5 kg; l1 min.:147 mm; dk:105 mm; Specific dynamic load factor K:100 N/mm²; h:295 mm; C1 max.:48 mm; l2 max.:389 mm; l7 min.:98 mm; Material constant KM:330; α:6 °; |
1797/2635G2 Bearing 2635x3440x270mm | RG:3/8 NPT; H:192.484 mm; Housing:FSAF 518; R2:27.781 mm; P150°:34.7 kN; PG:1/8 NPT; ba:34.925 mm; J1:53.975 mm; P60°:101 kN; P90°:60.9 kN; |
232.21.0975.013 Four Contact Ball Slewing Ring 842x1047x56mm | Oil:361.260 kN; D:500 mm; Grease:4490 kN; Dynamic (Cr):9 mm; with tapered bore:630 min-1; B:160 mm; rs (min):5 mm; d:300 mm; Pu:2560 kN; with cylindrical bore:530 min-1; |
RU228X Cross Roller Bearing 160x295x35mm | Grease Speed Rating n1:5000 rpm; D:120.0000 mm; d:55.000 mm; Basic Dynamic Radial Load Rating C:50700 N; Basic Static Radial Load Rating Co:18000 N; Oil Speed Rating n2:6000 rpm; B:29.00 mm; Fillet Radius ra:2.00 mm; |
XU160405 Crossed Roller Slewing Bearing | B:34 mm; Mass bearing:1.43 kg; Calculation factor e:0.3; da min.:86 mm; d1 ≈:95 mm; rb max.:0.5 mm; ra max.:1 mm; Calculation factor Y:0.4; r1,2 min.:1.1 mm; E:116.99 mm; |
42 mm x 80 mm x 45 mm 9E-1B75-1641-0753 Four Point Contact Ball Slewing Ring | A:9 mm; d:360 mm; Mass withdrawal sleeve:20 kg; G2:G 1/4; Nut for removal:HM 3176; G:Tr 380x5; B1:206 mm; B2:226 mm; Hydraulic nut:HMV 76 E; d1:340 mm; Size (mm):42 mm x 80 mm x 45 mm ; |
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
VU200220 Slewing Bearings (138x302x46mm) Machine Tool Bearing Video