No. | Brand | C | K | A | T | a | G | h | b |
75kw | - | - | - | - | - | - | - | - | - |
6014 | NTN | - | - | - | - | - | - | - | - |
200 | - | 43 mm | - | - | - | 39.062 mm | - | - | - |
5/10/50pcs | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | mm |
90363-52014 | Nachi | - | - | - | - | - | - | - | - |
603zz | - | - | - | - | - | - | - | - | - |
2 | - | - | - | - | - | - | M 25x1.5 | - | - |
SUS304 | - | - | - | - | - | - | Tr 670x6 | 20 mm | 45 mm |
1 | - | - | - | - | - | - | - | - | - |
6202LLUC3 | NTN | - | - | - | - | - | Tr 360x5 | - | - |
72 | - | - | - | - | - | - | M 25x1.5 | 2 mm | 5 mm |
6213ZZC3 | NTN | - | - | - | 33.338 mm | 32.002 mm | - | - | - |
61815 | - | - | - | - | - | - | - | - | - |
35x62x14 | NTN | - | - | - | - | - | - | - | - |
2m | - | - | - | - | - | - | - | - | - |
4-panel | - | - | - | - | - | - | - | - | - |
00152, | Timken | - | - | - | - | - | - | - | - |
PV90r | Danfoss | - | - | - | - | - | - | - | - |
3309 | SKF | - | - | - | - | - | - | 45.244 mm | - |
6207 | - | - | - | - | - | - | - | - | - |
P8-4s | - | - | - | - | - | - | - | 42.069 mm | - |
10 | - | - | - | - | - | - | - | - | - |
6005Dduc3 | NSK | - | - | - | - | - | - | - | - |
6036M1 | - | - | - | 9 mm | - | - | Tr 480x5 | - | - |
K50X58X20 | NTN | - | - | - | - | 22.1 mm | - | - | - |
18mm | - | - | - | - | 29.25 mm | - | - | - | - |
XR889059 Crossed Roller Bearing 1028.7x1327.15x95.25mm | B:32 mm; α:7 °; l7 min.:50 mm; h:163 mm; C1 max.:28 mm; G:M 42x3; dk:60 mm; Specific dynamic load factor K:100 N/mm²; Material constant KM:330; l1 min.:92 mm; |
SK235 Slewing Bearing | Cap bolt:2 x 7/16-14 UNC; Max. speed for Taconite seal:1800 r/min; P180°:12.5 kN; Pa:2.98 kN; da:42.862 mm; L:209.55 mm; A2:165.1 mm; P60°:28.9 kN; Ca:29.794 mm; N1:15.875 mm; |
011.30.500 Slewing Bearing | R2:22.225 mm; H:180.975 mm; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; Adapter sleeve assembly:SNW 17x2.7/8; Taconite seal:TER 52; A2:198.438 mm; P180°:34.7 kN; Bearing:22217 EK; S:4.763 mm; |
DH200-3 Slewing Bearing | d1:152.4 mm; B:33 mm; Lock nut:KMFE 34; d3:220 mm; B1:101 mm; Mass adapter sleeve assembly:5.5 kg; G:M 170x3; d:170 mm; Hydraulic nut:HMV 34 E; |
112.50.3150 Slewing Bearing | A1:98.425 mm; H1:101.6 mm; Cap bolt recommended tightening torque:298.3 N·m; Bearing:1315 K; J min.:263.525 mm; Appropriate attachment bolt size G:0.625 in; P120°:38.3 kN; A2:149.225 mm; PosiTrac Plus contact element:2 x B10724-37; PG:1/8 NPT; |
NRXT11020E Crossed Roller Bearing 110x160x20mm | B1:326 mm; G:Tr 900x7; d:900 mm; B5:125 mm; Mass adapter sleeve assembly:328 kg; G3:13 mm; d1:850 mm; B:100 mm; G2:G 1/8; Locking device:MS 30/900-850; |
VLI301255N Four Contact Ball Slewing Ring 1110x1400x90mm | Initial grease fill:181.44 g; J min.:295.275 mm; Cap bolt recommended tightening torque:203.4 N·m; A1:111.125 mm; Ca:55.804 mm; Bearing:23024 CCK/W33; Adapter sleeve assembly:SNW 3024x4.1/4; P180°:48.9 kN; Housing:FSAF 024 KA; R2:30.163 mm; |
797/1860G2 Bearing 1860x2320x150mm | Ew:48 mm; U:17 mm; Reference speed:9500 r/min; Fatigue load limit Pu:5.2 kN; Limiting speed:11000 r/min; Fw:43 mm; Basic static load rating C0:43 kN; Basic dynamic load rating C:20.9 kN; Mass needle roller and cage assembly:0.03 kg; |
Excavator Slewing Ring For KOMATSU PC200LC-7, Part Number:20Y-25-21200 | Limiting speed:10000 r/min; Calculation factor Y:1.1; db min.:40 mm; Fatigue load limit Pu:7.8 kN; B:22.28 mm; r3,4 min.:1.6 mm; Reference speed:8000 r/min; Calculation factor Y0:0.6; Da min.:54 mm; d:30.162 mm; |
CRBC 15025 Crossed Roller Bearings 150x210x25mm Industrial Robots Arm Use | da:104.775 mm; H1:133.35 mm; A2:254 mm; Taconite seal:TER 112; J1:69.85 mm; J min.:336.55 mm; Cap bolt recommended tightening torque:400 N·m; P120°:72.5 kN; H:257.175 mm; P90°:111 kN; |
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
MTO-145 Slewing Bearings(145x300x50mm) (5.709x11.811x1.968inch) Without Gear Video