| No. | Brand | C | K | A | T | a | G | h | b |
| 61916 | INA | - | - | - | 23.812 mm | - | - | - | - |
| 95% | - | - | - | - | - | - | - | - | - |
| GE25-UK-2RS-A | INA | - | - | - | - | - | - | - | - |
| NK1820 | - | - | - | - | - | - | - | - | - |
| S6208-ZZ | - | - | - | - | - | - | - | - | - |
| 9mm/11mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| GB-2414 | koyo | - | 4.5 mm | - | - | - | - | - | - |
| 6213ZZC3 | NTN | - | - | - | 33.338 mm | 32.002 mm | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 1992-1994 | Timken | - | - | - | - | - | - | - | - |
| 18mm/21mm | - | - | - | - | - | - | - | - | - |
| 3/4 | - | - | - | - | - | - | - | - | - |
| NJ348MA | - | - | - | - | - | - | - | - | - |
| 820 | - | - | - | - | - | - | - | - | - |
| 155-800rpm | - | - | - | - | - | - | - | - | - |
| 100cc | INA | - | - | - | - | - | - | 46.038 mm | - |
| 22mm | - | 28 mm | - | - | 35.25 mm | 32 mm | - | - | - |
| EC250D | INA | - | - | - | - | - | - | - | - |
| P2 | - | - | - | - | - | - | - | 210 mm | - |
| Bearing,2-Bolt,Ball,25mm | NTN | - | - | - | - | - | - | - | - |
| 1/2/3 | - | - | - | - | - | - | - | 42.069 mm | - |
| 100t/h | - | - | - | - | - | - | - | - | - |
| CRBF3515AT Cross Roller Bearing 35x95x15mm | B:90 mm; Mass bushing:0.53 kg; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:120 N/mm²; Tolerance shaft:f7 m/s; d:90 mm; Coefficient of friction µ max.:0.15; Tolerance housing:H7 m/s; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:40 N/mm²; |
| VSA200644-N Slewing Bearing Manufacturer 572x742.3x56mm | R2:22.225 mm; J min.:250.825 mm; Cap bolt:2 x 5/8-11 UNC; H2:38.1 mm; Pa:9.25 kN; A1:88.9 mm; Adapter sleeve assembly:SNW 17x2.15/16; A2:127 mm; P150°:26.7 kN; PG:1/8 NPT; |
| CRBA25040 Cross-Roller Ring (250x355x40mm) Rotary Units Of Manipulators Use | Basic dynamic load rating C:84.5 kN; S:0.794 mm; A1:75.406 mm; A:57.15 mm; da:49.212 mm; s:25.4 mm; B:73.025 mm; Mass bearing unit:4.99 kg; Attachment bolt diameter G:12.7 mm; A5:27.781 mm; |
| LS40FU0001F1 Swing Bearing For KOBELCO SK400LC IV Excavator | B:16 mm; Pu:4.730 kN; rs Dynamic (Cr):1 mm; with tapered bore:1206 ; B1:mm; Static (Cor):16.690 kN; d:30 mm; Oil:11 000 min-1; Grease:0.220 kN; D:62 mm; |
| RU297(G) Cross Roller Bearing 210x380x40mm | Basic dynamic load rating C:10500 kN; Limiting speed:600 r/min; Basic static load rating C0:27000 kN; K:15 mm; Da max.:952 mm; da min.:718 mm; s max.:9.5 mm; Mass bearing:1000 kg; Calculation factor kr:0.38; rb max.:6 mm; |
| 010.20.250 Slewing Bearing | Fatigue load limit Pu:0.655 kN; Basic dynamic load rating C:25.5 kN; Recommended tightening torque for grub screw:6.5 N·m; Mass bearing unit:0.81 kg; s1:25.4 mm; Hexagonal key size for grub screw N:3.969 mm; Thread grub screw G2:5/16-24 UNF; B:42.9 mm; d:31.75 mm; A:35 mm; |
| RB8016 Cross Roller Bearing 80x120x16mm | B:57.20 mm; Basic Static Radial Load Rating Co:143000 N; Basic Dynamic Radial Load Rating C:134000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4500 rpm; D:130.0000 mm; Grease Speed Rating n1:3400 rpm; Sealed Speed Rating n3:3400 rpm; Accessories:Shield & Seal; d:60.000 mm; |
| 013.45.1400 Slewing Bearing | End plug (suffix Y):EPR 15; Eye bolt:3/8-16 UNC; da:112.713 mm; J max.:406.4 mm; L:466.725 mm; N1:25.4 mm; J1:82.55 mm; J min.:371.475 mm; Max. speed for Taconite seal:700 r/min; R1:79.375 mm; |
| Slewing Ring For Excavator KOBELCO 40SR-3, Part Number:PH40F00004F1 | Stabilizing ring:SR-17-14; Ca:45.796 mm; Cap bolt:2 x 5/8-11 UNC; PG:1/8 NPT; R2:22.225 mm; Housing:SSAFS 517; P180°:32 kN; Adapter sleeve assembly:SNW 17x2.15/16; Cap bolt recommended tightening torque:298.3 N·m; H2:38.1 mm; |
| RE 18025 Crossed Roller Bearing 180x240x25mm |
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
MTE-145X Slewing Bearings(145x312x50mm) (5.709x12.286x1.968inch) With External Gear Video