| No. | Brand | C | K | A | T | a | G | h | b |
| NP913325 | Timken | - | 6 mm | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 16-14 | INA | - | - | 15 mm | - | - | Tr 800x7 | - | - |
| 38ED | Timken | - | - | - | - | - | - | 62.706 mm | - |
| 10PC | - | - | - | - | - | - | M 90x2 | - | - |
| KLT160 | - | - | - | - | - | - | - | - | - |
| SS304 | - | - | - | - | - | - | M 24x2 | - | - |
| KBO16-PP | INA | - | - | - | - | - | - | - | - |
| 19x8.5 | - | - | - | - | - | - | - | - | - |
| K3V63BDT | - | - | - | - | 106 mm | - | - | - | - |
| 2212EKTNGC3 | NSK | - | - | - | - | - | M 100x2 | - | - |
| SF693ZZ | - | 17.5 mm | - | - | 23 mm | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 3585 | Timken | - | - | - | - | - | - | - | - |
| 6307 | koyo | - | - | - | - | - | - | - | - |
| JD8253 | John Deere | - | - | 9 mm | - | - | Tr 340x5 | - | - |
| 18mm | - | - | - | - | - | 5 mm | - | 81.5 mm | - |
| 35A20 | - | - | - | - | 336.55 mm | - | - | - | - |
| PC60-6 | - | - | 12 mm | - | - | - | - | - | - |
| N207 | Nachi | - | - | - | - | - | - | - | - |
| 1390 | - | - | - | - | - | - | M 75x2 | 3.5 mm | 8 mm |
| 4600 | - | - | - | - | - | - | - | - | - |
| Plywood/C-2 | - | - | - | - | - | - | - | - | - |
| HCB71818C.TPA.P4.UL | - | - | - | - | - | - | - | - | - |
| HC71911E.T.P4S.UL | - | 20 mm | - | - | 25.25 mm | 19 mm | - | - | - |
| 22211 | SKF | - | - | - | - | - | - | - | - |
| W60/2.5 | - | - | - | - | - | - | - | - | - |
| AP2D36 | - | - | - | - | - | - | - | - | - |
| VA140188V Slewing Bearings (135x259.36x35mm) Machine Tool Bearing | Lock nut:N 072; Threads per inch:5; d1:341.313 mm; B1:290.246 mm; Hydraulic nut:HMVC 72E; Mass adapter sleeve assembly:61.5 kg; d3 max.:419.227 mm; B:45.491 mm; Sleeve:S 3272x13.7/16; G:359.918 mm; |
| VRT 1075A Cross Roller Table 20x75x8mm | Sealed Speed Rating n3:4800 rpm; Accessories:One Seal & Snap-Ring; B:30.20 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:4800 rpm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; d:50.000 mm; Oil Speed Rating n2:6300 rpm; Basic Static Radial Load Rating Co:39000 N; |
| CAT120 Slewing Bearing | ra max.:1 mm; B2 ≈:34 mm; Calculation factor Y0:2.5; Fatigue load limit Pu:10.8 kN; B1:31 mm; Da max.:78 mm; B:23 mm; Limiting speed:10000 r/min; Basic dynamic load rating C:104 kN; Mass bearing + sleeve:0.7 kg; |
| PC227 Slewing Bearing | Shaft washer:WS 89324; D:210 mm; Fatigue load limit Pu:216 kN; Mass roller and cage thrust assembly:2.64 kg; Basic static load rating C0:2360 kN; d:120 mm; Ea:132 mm; Limiting speed:1500 r/min; Basic dynamic load rating C:510 kN; Roller and cage thrust assembly:K 89324 M; |
| VLA200544N Slewing Bearings (434x640.3x56mm) Turntable Bearing | Cap bolt, size:M 36x240; ba min.:179 mm; P180°:3200 kN; bc:208.5 mm; N:50 mm; Ca:214 mm; P90°:3900 kN; d2:547 mm; ATS:410 mm; Q180°:2100 kN; |
| R9-63N3 Crossed Roller Slewing Rings With Internal Gear | P150°:185 kN; Cap bolt recommended tightening torque:2467.6 N·m; P180°:222 kN; H2:85.725 mm; P60°:557 kN; Ca:107.798 mm; P90°:334 kN; Da:359.999 mm; A1:203.2 mm; N1:34.925 mm; |
| RE 20025 Crossed Roller Bearing 200x260x25mm | D:440 mm; D1:325 mm; Da max.:348 mm; Minimum axial load factor A:4.147; H:95 mm; Fatigue load limit Pu:530 kN; Mass bearing:42.5 kg; ra max.:2.5 mm; B:28.5 mm; Basic static load rating C0:7200 kN; |
| 797/870K Slewing Bearing | A1:158.75 mm; Cap bolt:4 x 3/4-10 UNC; Adapter sleeve assembly:SNW 3036x6.3/8; H1:169.875 mm; J max.:488.95 mm; R1:104.775 mm; ba:68.263 mm; N1:28.575 mm; Bearing limiting speed:2600 r/min; P60°:226 kN; |
| PC300-6 Komastu Excavator Bearing 207-25-61100 | D:180.0000 mm; Basic Dynamic Radial Load Rating C:178000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:2000 rpm; Oil Speed Rating n2:3000 rpm; Sealed Speed Rating n3:2000 rpm; Accessories:Two Seals; Basic Static Radial Load Rating Co:166000 N; d:100.000 mm; B:60.30 mm; |
| 121.25.630 Slewing Bearing | Permissible sliding velocity v min.:0 m/s; h:23 mm; B1:5 mm; Coefficient of friction µ min.:0.08; Specific dynamic load factor K:25 N/mm²; D:32 mm; Tolerance housing:H7; B:20 mm; Mass bushing:0.092 kg; d:22 mm; |
MTE-210 Slewing Bearings(210x373x40mm) (8.268x14.686x1.575inch) With External Gear Video
P4 Precision YRT50 Double Direction Slewing Ring Bearing
50mm Bore Diameter P4 Precision YRT50 Double Direction Rotary Table Bearing. 1. Specification: • YRT rotary table bearings consist of a thrust/radial housing
Axial/radial bearings - YRT50 - Mounting information/user
Rotary table bearings. YRT, RTC, ZKLDF, ZKXDF Brief mounting manual. PDF. Mounting of rolling bearings. Mechanical mounting. PDF. Mounting of rolling
Axial/radial bearings YRT50 (Series YRT) - medias
Axial/radial bearings YRT50 (Series YRT) double direction, for screw mounting. The datasheet is only an overview of dimensions and basic load ratings of the
YRT50 bearing, Rotary table bearings 50x126x30 for Seattle
high quantities YRT50 Bearing YRT 50 dimension: 50x126x30, Enquiry for global YRT50 Rotary table bearings suppliers for Seattle or other, Old model:YRT 50,
YRT50 Rotary Table Bearing 50X126X30mm - TradeBearings
YRT50 Rotary Table Bearing 50X126X30mm 50x126x30- YRT50 bearing,Seals Type:,Material:Chrome Steel, Gcr15,Precision Rating: from Hubei Parts Service
Other bearing YRT50-INA - 50x126x30 mm Fast delivery
Other bearing YRT50-INA , dim : Ø int. 50 x Ø ext. 126 x th. 30 mm. SAME DAY SHIPPING. The specialist at your service for over 10 years
YRT50 Rotary Table Bearings | Lily Bearings
The bearing is used for machining center axial turntable. We can supply the YRT50 Rotary Table Bearing with P4 or P2 level. Contact us to order