| W211PPB6 Square Bore Bearing 38.89*103.56*44.45mm | A:60 mm; Recommended tightening torque for set screw:16.8 Nm; J:159 mm; N:20mm; L1:65 mm; H2:114 mm; H:57.2 mm; N1:25 mm; d:49.21 mm; B:51.6 mm; |
| GW214PPB2 Square Bore Bearing 70*125*39.69mm | Designation of housing:SP208-210/90N-; SW:4.76 mm; A5:32.6 mm; s1:25.8 mm; T max.:200 °C; H:120 mm; L:320 mm; B:51.6 mm; A:31 mm; L1:260 mm; |
| W208PP9 Square Bore Bearing 26.13*80*36.53mm | f0:13.8; d1:27.5 mm; Characteristic inner ring frequency, BPFI:5.42 Hz; Fatigue limit load, Cu:0.23 kN; Characteristic rolling element frequency, BSF:4.68 Hz; rs min:0.6 mm; ra max:0.6 mm; Static load, C0:5 kN; d:20 mm; Dynamic load, C:9.2 kN; |
| W208PPB4 Square Bore Bearing 30.175*80*30.18mm | Product Group:B04120; Category:Bearings; Inventory:0.0; F:12 mm; Minimum Buy Quantity:N/A; e:17 mm; G:M10X1.25; C0r:6.65 kN; Weight / Kilogram:0.006; Precision class:P0; |
| W209PPB4 Square Bore Bearing 39*85*30.18mm | d:75 mm; Characteristic rolling element frequency, BSF:5.44 Hz; ra max:1.5 mm; D1:119.2 mm; rs min:1.5 mm; Characteristic inner ring frequency, BPFI:5.89 Hz; Min operating temperature, Tmin:-40 °C; Nlim:8,100 rpm; f0:14.5; Characteristic cage frequency, FTF:0.41 Hz; |
| GW208PPB6 Square Bore Bearing 26.13*80*36.53mm | T max.:100 °C; N1:21 mm; Recommended tightening torque for set screw:8 Nm; L:167 mm; H1:19 mm; L1:56 mm; G:M6x1; S:17.5 mm; Designation of open end cover:SCOU207-23; N:17mm; |
| W211PPB2/PDNF155-2 Square Bore Bearing 55.58*110*33.34mm | Designation of housing:FA207-; L1:82 mm; T min.:-20 °C; H:161 mm; s1:36.3 mm; e:19 mm; Designation of bearing:EX207-23G2L4; T max.:100 °C; J1:66 mm; Weight:1.38 kg; |
| W209PPB11 Square Bore Bearing 45.24*85*36.53mm | Nlim (grease):4,000 rpm; d:105 mm; da min:114 mm; Dynamic load, C:72.5 kN; rs min:2 mm; Characteristic inner ring frequency, BPFI:8.44 Hz; Characteristic outer ring frequency, BPF0:6.56 Hz; f0:15.8; ra max:2 mm; Max operating temperature, Tmax:120 °C; |
| W210PPB6 Square Bore Bearing 29.97*90*36.53mm | B:74.6 mm; J:210 mm; Designation of bearing:UC214-43G2T20; C:62 kN; S:30.2 mm; L1:83 mm; H1:27 mm; Recommended tightening torque for set screw:27.1 Nm; T max.:200 °C; d:68.26 mm; |
| W208PP6 Square Bore Bearing 26.13*80*36.53mm | Retainer Material:Polymer; Brand:Baldor-Dodge; Housing Type:2 Bolt Pillow Block; End Cap Groove:No; Flinger Type:Standard; Anti-Rotation Pin:Yes; Self Aligning:Self Centering; Bearing Locking Device:Setscrew; Seal Type:Shield; Grease Type:DuPont Krytox GPL 20; |