No. | Brand | C | K | A | T | a | G | h | b |
18685 | Timken | - | - | - | - | - | - | - | - |
RU195 | - | - | - | - | - | - | - | - | - |
10x | - | - | - | - | - | - | - | - | - |
30X42X7 | - | - | - | - | - | - | - | - | - |
5812130000 | Rexroth | - | - | - | - | - | - | - | - |
3/4 | - | - | - | - | - | - | - | - | - |
A4VSO40 | - | - | - | - | 360 mm | - | - | - | - |
24048 | SKF | - | - | - | - | - | - | - | - |
10,000 | - | - | - | - | - | - | - | - | - |
9G-7641 | - | - | - | - | - | - | - | - | - |
12mm | - | - | - | - | - | - | - | - | - |
BS1088 | - | - | - | - | - | - | - | - | - |
900 | NTN | - | - | - | - | - | - | 51.594 mm | - |
50x | NSK | - | - | - | - | - | - | - | - |
6800 | - | - | - | - | - | - | - | - | - |
2m² | - | - | - | - | - | - | - | - | - |
Sk200-8 | - | - | - | - | - | - | - | - | - |
32040-X-XL | fag | - | - | - | - | - | - | 38.1 mm | - |
R20 | - | - | - | - | - | - | - | - | - |
20*4W | - | - | - | - | - | - | - | - | - |
1 | - | - | - | - | - | - | - | - | - |
350 | fag | - | - | - | - | - | - | - | - |
0.3% | - | - | - | 58.737 mm | - | - | - | - | - |
CRB70045UUT1 High Precision Cross Roller Ring Bearing | d1 ≈:368 mm; K:5 mm; r1,2 min.:3 mm; B:118 mm; das:352 mm; Basic dynamic load rating C:1760 kN; Mass bearing:56 kg; Reference speed:600 r/min; b1:9.4 mm; Basic static load rating C0:4050 kN; |
RKS.161.14.0544 Cross Roller Slewing Bearing With External Gear | Basic Dynamic Radial Load Rating C:35800 N; Fillet Radius ra:1.50 mm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:7700 rpm; Basic Static Radial Load Rating Co:23600 N; Oil Speed Rating Open/Shielded n2:9400 rpm; d:25.000 mm; B:21.00 mm; D:80.0000 mm; |
75 mm x 95 mm x 10 mm VSA 250855-N Four Point Contact Slewing Ring | Cap bolt:5/8-11 UNC; H1:114.3 mm; J min.:295.275 mm; Da:180 mm; Bearing:23024 CCK/W33; Ca:55.804 mm; H2:44.45 mm; Bearing limiting speed:4000 r/min; PG:1/4 NPT; Appropriate attachment bolt size G:0.75 in; Size (mm):75 mm x 95 mm x 10 mm ; |
NRXT10020 High Precision Cross Roller Ring Bearing | Basic static load rating C0:166 kN; l4 max.:194 mm; Basic dynamic load rating C:150 kN; dk:53 mm; C1 max.:24 mm; d4 ≈:58 mm; l3 min.:65 mm; Material constant KM:330; l5 ≈:25 mm; l7 min.:40 mm; |
R200 Bearings | Cap bolt recommended tightening torque:81.3 N·m; J min.:187.325 mm; N1:19.05 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 5; P180°:19.1 kN; L:244.475 mm; Housing:SAF 511; P120°:17.3 kN; H:133.35 mm; |
Offer Slewing Bearing For QY-35K Crane | Housing:FYAWK 510 L; Recommended diameter for attachment bolts, inch G:0.5 in; Thread grub screw G2:3/8-24 UNF; s1:32.6 mm; Basic dynamic load rating C:35.1 kN; d:49.213 mm; Recommended diameter for attachment bolts, mm G:12 mm; Bearing:YAR 210-115-2RF/VE49; A:39 mm; L:112 mm; |
110.25.560 Slewing Bearing | b1:15.5 mm; D:400 mm; α:6 °; ra max.:1 mm; Da max.:388.5 mm; Sealing solution:Triple-lip seals; Basic static load rating C0:18000 kN; b:15.5 mm; Mass plain bearing:65 kg; Lubricant:Regular relubricatio; |
D1797/1000G2 Bearing 1000x1400x2006mm | Oil Speed Rating Open/Shielded n2:4800 rpm; d:65.000 mm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:102000 N; Accessories:Snap-Ring; B:33.00 mm; Basic Static Radial Load Rating Co:90000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:3900 rpm; |
023.50.2800 Slewing Bearing | B:52.40 mm; Basic Static Radial Load Rating Co:120000 N; Oil Speed Rating n2:3400 rpm; Sealed Speed Rating n3:2400 rpm; Grease Speed Rating n1:2400 rpm; Fillet Radius ra:2.00 mm; Accessories:One Shield & Snap-Ri; D:160.0000 mm; Basic Dynamic Radial Load Rating C:130000 N; d:90.000 mm; |
RU 445 Crossed Roller Bearing 350x540x45mm | J6:146 mm; d:36.513 mm; H:93 mm; Housing:SY 507 M/VZ033; Basic static load rating C0:15.3 kN; s1:32.3 mm; Housing material:Cast iron; End cover:ECY 207; Thread grub screw G2:3/8-24 UNF; H2:19 mm; |
HS6-33N1Z Slewing Bearings (29.13x37.4x2.2inch) With Internal Gear Video