| No. | Brand | C | K | A | T | a | G | h | b |
| 2 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| DH55 | INA | - | - | - | - | - | M 36x3 | 130 mm | - |
| 15mm, | - | - | 7.5 mm | - | - | - | - | - | - |
| 2 | Rexroth | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| 6905-2RS | - | - | - | - | - | - | - | - | - |
| TY-101 | - | - | - | - | - | - | M 64x4 | - | - |
| ZK04 | - | - | - | - | - | - | - | - | - |
| PC300-7 | - | - | - | - | - | - | - | - | - |
| 6KG | - | - | - | - | - | - | - | 46.038 mm | - |
| HPV118HW-25A | Hitachi | - | - | - | - | - | - | - | - |
| 6901-2RS | - | - | - | - | - | - | - | - | - |
| F247 | - | - | - | - | - | - | - | - | - |
| 6811 | - | - | - | - | - | - | - | - | - |
| 4'x10' | - | - | - | - | - | - | - | - | - |
| AS206 | NSK | - | - | - | - | - | - | - | - |
| 950 | - | - | - | - | - | - | - | - | - |
| 5PC | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6007ZZ | - | - | - | - | 34 mm | - | - | - | - |
| 2m | - | - | - | - | - | - | - | - | - |
| K120640HD | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | 79.375 mm | - |
| 1.8Ton | - | 24 mm | - | - | 29.75 mm | 25 mm | - | - | - |
| 7803-63-6 | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 6800 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| XSU140744 Cross Roller Bearings,XSU140744 Bearings SIZE 674x814x56mm | Specific dynamic load factor K:140 N/mm²; Tolerance housing:H7; Mass bushing:0.97 kg; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.08; B:150 mm; d:155 mm; Coefficient of friction µ min.:0.03; D:140 mm; Tolerance shaft:h8; |
| 136-2884 Swing Bearing For Caterpillar 312BL Excavator | d2 (max):35 mm; B:15 mm; s:1.5 mm; Static (Coa):12.6 kN; b:3 mm; Pu:1.540 kN; r1s (min):0.6 mm; rs (min):1 mm; b1:7.25 mm; Dynamic (Ca):15.8 kN; |
| A8-22P11 Four Point Contact Ball Slewing Bearings SLEWING RINGS | Stabilizing ring:SR-21-18; H1:120.65 mm; Pa:17.3 kN; R2:28.575 mm; Adapter sleeve assembly:SNW 118x3.1/4; Da:190 mm; Appropriate attachment bolt size G:0.75 in; ba:52.388 mm; S:4.763 mm; Labyrinth ring:2 x LOR 189; |
| 013.40.0900.001 Ring Bearing For Military Equipment1022x778x100mm | Oil Speed Rating n2:4300 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:88400 N; D:170.0000 mm; d:80.000 mm; Grease Speed Rating n1:3600 rpm; B:39.00 mm; Basic Static Radial Load Rating Co:33500 N; |
| NRXT30040DD Crossed Roller Bearing 300x405x40mm | db:158.75 mm; A2:260.35 mm; S:4.763 mm; dc:134.938 mm; Housing:SSAFS 228; P60°:301 kN; Pa:82.3 kN; A1:149.225 mm; Da:250 mm; L:511.175 mm; |
| 122.40.2500 Slewing Bearing | d1 ≈:38.25 mm; B2:8 mm; B1:4 mm; Mass angle ring:0.023 kg; d:25 mm; r3,4 min.:1.1 mm; |
| 9166468 Swing Bearing For HITACHI ZX330LC Excavator | Accessories:One Seal; Basic Static Radial Load Rating Co:1360 N; Fillet Radius ra:0.30 mm; B:7.00 mm; d:8.000 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Basic Dynamic Radial Load Rating C:3250 N; Sealed Speed Rating n3:23000 rpm; D:22.0000 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; |
| 9129521 Swing Bearing For HITACHI EX450LC-5 Excavator | D:160.0000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3400 rpm; d:90.000 mm; Sealed Speed Rating n3:2400 rpm; B:52.40 mm; Grease Speed Rating n1:2400 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:151000 N; Basic Static Radial Load Rating Co:193000 N; |
| 6787/1600G Bearing 1600x2066.4x190mm | Static axial stiffness, preload class A:104 N/µm; Reference grease quantity Gref:4.1 cm³; b:1.6 mm; Attainable speed for oil-air lubrication:34000 r/min; Static axial stiffness, preload class B:156 N/µm; C2:2.7 mm; Calculation factor (back-to-back, face-to-face) X2:0.67; Db max.:75.8 mm; D:80 mm; Calculation factor fHC:1; |
| 0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter 1787/1075KM Slewing Bearing | ra max.:5 mm; Axial load factor Y:0.6; Basic dynamic load rating C:1510 kN; s max.:11.5 mm; d:1060 mm; Mass bearing:259 kg; Da min.:1228 mm; Fatigue load limit Pu:220 kN; Calculation factor kr:0; D:1280 mm; Size (mm):0 Inch | 0 Millimeter x 4.331 Inch | 110.007 Millimeter x 0.741 Inch | 18.821 Millimeter ; |
1799/525 Bearing 525x725x80mm Video