| 199-4483 Swing Bearing For Caterpillar 325B Excavator | Limiting speed:4500 r/min; Reference speed:4000 r/min; Fw:105 mm; Basic dynamic load rating C:45.7 kN; U:21 mm; Basic static load rating C0:129 kN; Mass needle roller and cage assembly:0.13 kg; Ew:112 mm; Fatigue load limit Pu:15.3 kN; |
| Komatsu PC220-6 Excavator Slewing Bearing | Mass needle roller:1.19 g; r1 max.:0.8 mm; Dw:3.5 mm; r1,2 min.:0.3 mm; Lw:15.8 mm; r2 max.:1 mm; |
| 1799/1360 Slewing Bearing | B1:250.241 mm; d:360 mm; Threads per inch:5; Sleeve:S 3172x13.7/16; Locking plate:PL 72; Hydraulic nut:HMVC 72E; G:359.918 mm; Lock nut:N 072; B5:55.016 mm; Mass adapter sleeve assembly:54.5 kg; |
| 012.60.2240 Slewing Bearing | H:161.925 mm; Da:130 mm; Lock washer:W 12; ba:38.1 mm; S:4.763 mm; Max. speed for Taconite seal:1075 r/min; dc:57.15 mm; P150°:13.8 kN; Cap bolt recommended tightening torque:149.1 N·m; db:73.025 mm; |
| ZAX70 Slewing Bearing | Calculation factor kr:0.3; rb max.:1 mm; Reference speed:2200 r/min; das:103 mm; Mass bearing:1.97 kg; D1 ≈:124 mm; r1,2 min.:1.5 mm; Limiting speed:2800 r/min; B:37 mm; r3,4 min.:1 mm; |
| RE15030 Cross Roller Bearings,RE15030 Bearings150x230x30mm | B:25.40 mm; Basic Static Radial Load Rating Co:20000 N; d:20.000 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:8500 rpm; Sealed Speed Rating n3:8500 rpm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:12000 rpm; D:52.0000 mm; Basic Dynamic Radial Load Rating C:23800 N; |
| M7-42P1 Angular Contact Ball Slewing Rings | da max.:169 mm; r5 min.:1.5 mm; D:300 mm; Mass bearing pair:49.1 kg; T:154 mm; 2B:140 mm; K:15 mm; Calculation factor e:0.83; Da min.:235 mm; Da max.:284 mm; |
| VSU200544 Slewing Bearing 472*616*56mm | B:10.00 mm; Oil Speed Rating Open/Shielded n2:28000 rpm; Grease Speed Rating Open/Shielded n1:22000 rpm; Oil Speed Rating n2:28000 rpm; D:32.0000 mm; Grease Speed Rating n1:22000 rpm; Accessories:One Shield & Snap-Ri; Sealed Speed Rating n3:15000 rpm; Basic Static Radial Load Rating Co:3100 N; Basic Dynamic Radial Load Rating C:6890 N; |
| Excavator Slewing Ring For KOMATSU PC220LC-5, Part Number:20Y-25-11103 | Calculation factor f1:0.99; Preload class A GA:500 N; D2:138.17 mm; da min.:107 mm; Preload class C GC:2000 N; d1:115.4 mm; d:100 mm; Calculation factor f2D:1.08; Basic static load rating C0:80 kN; Calculation factor (single, tandem) Y2:0.87; |
| 120.25.630 Slewing Bearing | d5:134 mm; h:4 mm; B:32 mm; d3:135 mm; Grub (set) / Locking screw size:M 6; Associated spanner (Hook spanner in accordance with DIN 1810):HN 18-20; G:M 105x2; d1:130 mm; Mass:1.35 kg; b:10 mm; |