| HS6-25N1Z Heavy Duty Slewing Ring Bearing With Internal Gear | Cb min.:5 mm; Ca min.:5 mm; Calculation factor Y0:0.9; Fatigue load limit Pu:22.8 kN; a:25.026 mm; Basic static load rating C0:212 kN; r3,4 min.:1.5 mm; Da max.:135.5 mm; Basic dynamic load rating C:149 kN; Da min.:135 mm; |
| 021.30.900 Slewing Bearing | d:670 mm; Mass bearing:75.5 kg; Basic dynamic load rating C:2000 kN; Reference speed:220 r/min; B:22 mm; Fatigue load limit Pu:815 kN; H:78 mm; D1:675 mm; Limiting speed:450 r/min; Minimum axial load factor A:14; |
| 110-7167 Swing Bearing For Caterpillar 322L FM Excavator | F:37 mm; d:32 mm; Mass inner ring:0.062 kg; r, r1,2 min.:0.3 mm; B:30 mm; |
| PC60-7(80T) Slewing Bearing | Grease Speed Rating n1:1800 rpm; Oil Speed Rating n2:2800 rpm; B:65.10 mm; D:190.0000 mm; Accessories:No Shield, no Seal,; Basic Static Radial Load Rating Co:180000 N; Fillet Radius ra:2.00 mm; d:105.000 mm; Basic Dynamic Radial Load Rating C:186000 N; Sealed Speed Rating n3:1800 rpm; |
| CRBB05013 Cross Roller Ring (50x80x13mm) Robots Ring | Calculation factor fHC:1.01; r1,2 min.:1 mm; Preload class C GC:390 N; Preload class A GA:65 N; Calculation factor f0:8.1; Ball diameter Dw:7.144 mm; Basic dynamic load rating C:12.4 kN; Basic static load rating C0:7.65 kN; d2:47.6 mm; Da max.:63.4 mm; |
| VU 140179 Four Point Contact Slewing Ring Slewing Bearing | l2 max.:349 mm; C1 max.:43 mm; B:49 mm; α:6 °; l1 min.:132 mm; h:265 mm; l7 min.:85 mm; r1 min.:1 mm; d:70 mm; Material constant KM:330; |
| RE 25040 Crossed Roller Bearing 250x355x40mm | ba:52.388 mm; da:74.612 mm; Stabilizing ring:2 x SR-1617; H1:114.3 mm; J min.:295.275 mm; Max. speed for Taconite seal:1050 r/min; Taconite seal:TER 184; h:47.625 mm; Initial grease fill:365.71 g; Ca:69.799 mm; |
| NRXT40040DD Crossed Roller Bearing 400x510x40mm | T:23 mm; Dynamic (Ca):76.4 kN; rs (min):1.5 mm; Pu:13.170 kN; C:17.5 mm; B:23 mm; r1s (min):1.5 mm; Static (Coa):108 kN; D:90 mm; d2:55 mm; |
| RB 30035 UU Crossed Roller Bearing 300x395x35mm | B:258.762 mm; r1,2 min.:3.3 mm; Basic static load rating C0:15600 kN; Calculation factor Y2:3; Thrust factor K:1.76; r3,4 min.:6.4 mm; Calculation factor Y1:2; Comparative axial load rating CFa:491 kN; Basic dynamic load rating C:6050 kN; Design variant/feature:TDIT/Y2; |
| 17972500G2K5 Bearing 2500x3250x210mm | Recommended tightening torque for grub screw:4 N·m; A5:20.5 mm; End cover:ECY 205; A:30 mm; d:23.812 mm; Limiting speed:7000 r/min; Housing:FYTB 505 M; Db1:65 mm; GN:1/4-28 SAE-LT; Bearing:YAR 205-015-2F; |