No. | Brand | C | K | A | T | a | G | h | b |
SS304 | - | - | - | - | - | - | M 24x2 | - | - |
311NV | - | - | - | - | - | - | - | - | - |
PV90R100 | Danfoss | - | - | - | - | - | - | - | - |
6702ZZ | - | - | - | - | - | - | 84.836 mm | - | - |
5mm-50mm | - | 14 mm | - | - | 20.75 mm | 23 mm | - | - | - |
686ZZ | NSK | - | - | - | - | - | - | - | - |
100% | INA | - | - | - | - | - | - | 79.375 mm | - |
6K | - | - | - | - | - | - | - | - | - |
PC130-6 | - | - | - | - | - | - | - | - | - |
2019 | - | - | - | - | - | - | - | - | - |
NU310ET | NSK | 159.5 mm | - | - | - | - | - | - | - |
3mm/4mm | - | - | - | - | - | - | - | 50.8 mm | - |
4pcs | - | - | - | - | - | - | - | - | - |
41.32005 | Nachi | - | - | - | - | - | - | - | - |
6202LLUC3 | NTN | - | - | - | - | - | - | - | - |
D65EX-16 | - | - | - | - | - | - | - | - | - |
16-14 | INA | - | - | - | - | - | - | - | - |
1-Mcp | - | - | - | - | 53.975 mm | - | - | - | - |
XJ900 | - | - | - | - | - | - | - | 212.5 mm | - |
9mm | - | - | - | - | - | 25 mm | - | - | 4.5 mm |
XU160260 Crossed Roller Slewing Bearing | C:28.575 mm; da max.:43.4 mm; rb max.:1 mm; Specific static load factor K0:300 N/mm²; b:4.8 mm; Da max.:58 mm; da min.:41.4 mm; d:38.1 mm; Da min.:52.3 mm; α:6 °; |
Slewing Bearing For Komatsu PC210 Excavator | B:52.00 mm; Basic Static Radial Load Rating Co:200000 N; d:85.000 mm; Oil Speed Rating Open/Shielded n2:3200 rpm; Basic Dynamic Radial Load Rating C:190000 N; Grease Speed Rating Open/Shielded n1:2600 rpm; Accessories:Without Accessories; D:210.0000 mm; Fillet Radius ra:3.00 mm; |
Wind Power Slewing Bearing 033.30.1500.03 Double Row Ball Wind Turbine Slewing Bearing China | Cap bolt:4 x 7/8-9 UNC; PG:1/4 NPT; P90°:173 kN; H2:79.375 mm; Eye bolt:2 x 3/8-16 UNC; Da:339.999 mm; Cap bolt recommended tightening torque:271.2 N·m; Bearing:23238 CCK/W33; N1:34.925 mm; H:401.637 mm; |
RE 3010 UU Crossed Roller Bearing 30x55x10mm | B:26 mm; Minimum axial load factor A:22.045; Reference speed:190 r/min; Fatigue load limit Pu:1000 kN; Basic static load rating C0:16600 kN; D:900 mm; da min.:863 mm; d1:895 mm; Limiting speed:380 r/min; ra max.:3 mm; |
6397/2240G Slewing Bearing 2240x2650x180mm | R2:36.513 mm; P90°:113 kN; H1:152.4 mm; P120°:73.8 kN; Pa:31.2 kN; End plug (suffix Y):EPR 15; A2:269.875 mm; Eye bolt:3/8-16 UNC; Taconite seal:TER 117; Stabilizing ring:SR-26-0; |
RB25040 Cross Roller Bearing 250x355x40mm | Static (Coa):178 kN; D:140 mm; d2 (max):mm; F:95 mm; E:mm; Pu:21.100 kN; Dynamic (Ca):147 kN; s:2.5 mm; b1:mm; b:mm; |
RE 11020 Crossed Roller Bearing 110x160x20mm | Limiting speed:1200 r/min; A5:20 mm; Thread grub screw G2:M5; Hexagonal key size for grub screw N:2.5 mm; Housing material:Cast iron; J:117.5 mm; Housing:SY 506 M/VZ033; End cover:ECY 206; L:152 mm; J6:140 mm; |
111.28.1120 Slewing Bearing | D:380 mm; Mass roller and cage thrust assembly:7.59 kg; Housing washer:GS 81160; Ea:315 mm; d:300 mm; Fatigue load limit Pu:335 kN; Shaft washer:WS 81160; Basic dynamic load rating C:850 kN; Reference speed:430 r/min; Roller and cage thrust assembly:K 81160 M; |
230.20.0400.013 Slewing Ring Bearings | d1 ≈:298 mm; r3,4 min.:3.3 mm; Fatigue load limit Pu:710 kN; D1 ≈:370 mm; Comparative radial load rating CF:1100 kN; Basic dynamic load rating C:4130 kN; Calculation factor Y0:2; B:314.325 mm; Calculation factor Y2:3; T:317.5 mm; |
MTE-145X Heavy Duty Slewing Ring Bearing | Appropriate attachment bolt size G:1 in; Ca:82.804 mm; RG:3/4 NPT; Cap bolt:7/8-9 UNC; ba:65.088 mm; End plug (suffix Y):EPR 16; S:4.763 mm; Mass pillow block:115 kg; PosiTrac Plus contact element:2 x B10724-125; J1:95.25 mm; |
1797/2800G2 Bearing 2800x3680x240mm Video