| 130.50.3550 Slewing Bearing | D1:82.22 mm; D:95 mm; B:18 mm; Calculation factor f0:8.5; Calculation factor f:1.08; Static axial stiffness, preload class A:48 N/µm; Calculation factor fHC:1; Preload class C GC:550 N; Static axial stiffness, preload class B:75 N/µm; r3,4 min.:0.6 mm; |
| 020.60.4000 Slewing Bearing | Bearing designation:PLC 77-1 ; Weight:0.3 kg; B:43.8 mm; D:52 mm; Static (Cor):17.7 kN; Pu:0.800 kN; Dynamic (Cr):24.3 kN; Oil:0 min-1; Grease:5 250 min-1; d:25 mm; |
| I.1100.32.00.C Four Contact Ball Slewing Ring 812x1100x90mm | Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Basic Static Radial Load Rating Co:64000 N; Grease Speed Rating n1:4300 rpm; Sealed Speed Rating n3:2800 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:83200 N; D:150.0000 mm; B:28.00 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; |
| NRXT5013 Crossed Roller Bearing 50x80x13mm | da min.:32 mm; Da max.:55 mm; Fatigue load limit Pu:0.72 kN; d:25 mm; Calculation factor Y0:0.76; r1,2 min.:1.1 mm; d2 ≈:32.26 mm; Calculation factor X:0.41; Calculation factor A:0.00158; r3,4 min.:0.6 mm; |
| 797/962G2 Bearing 962x1200x90mm | Mass adapter sleeve assembly:37.2 kg; B5:66 mm; A:4 mm; Locking device:MS 3080-76; d3:470 mm; B:52 mm; G2:M 6; G:Tr 400x5; Hydraulic nut:HMV 80E; B1:168 mm; |
| L4-13P8Z** Four-point Contact Ball Slewing Rings | Minimum load factor A:13; d:530 mm; Reference speed:850 r/min; Da max.:550 mm; d1 ≈:578 mm; Mass bearing (including seat washer where applicable):11 kg; da min.:560 mm; Basic dynamic load rating C:203 kN; D1 ≈:532 mm; D:580 mm; |
| 1799/1360 Slewing Bearing | B1:250.241 mm; d:360 mm; Threads per inch:5; Sleeve:S 3172x13.7/16; Locking plate:PL 72; Hydraulic nut:HMVC 72E; G:359.918 mm; Lock nut:N 072; B5:55.016 mm; Mass adapter sleeve assembly:54.5 kg; |
| S24-178E1 Angular Contact Ball Slewing Rings With External Gear | A2:173.037 mm; Initial grease fill:181.44 g; Labyrinth ring (dc shaft position):LOR 188; Max. speed for PosiTrac Plus seal:1450 r/min; H2:44.45 mm; H1:114.3 mm; Cap bolt recommended tightening torque:515.2 N·m; Pa:24.5 kN; da:85 mm; Ca:69.799 mm; |
| 232.20.0800.013 Slewing Ring With Flange 737.6x948x56mm | R2:37.306 mm; Ca:119.812 mm; P120°:85.9 kN; Stabilizing ring:SR-34-0; PG:1/4 NPT; Labyrinth ring:2 x LOR 139; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:132 kg; S:4.763 mm; P150°:77 kN; |
| 1797/3230GY Slewing Beairng | B:12 mm; B1:mm; rs Dynamic (Cr):0.6 mm; d:17 mm; with cylindrical bore:20 000 min-1; D:40 mm; Static (Cor):8.140 kN; with tapered bore:1203 ; Pu:2.030 kN; Grease:0.090 kN; |