| YRT395 Rotary Table Bearings (395x525x65mm) Turntable Bearing | Width A:1.8750 in; Distance J:3.5000 in; Insert Bearing IB:Stainless Steel; Weight W:2.00 lb; Dimension H1:1.9375 in; Thread Diameter G:1/2-13; Dimension L:4.7500 in; Dimension F:0.7500 in; Dimension S1:1.1875 in; Shaft Diameter D:1 1/2 in; |
| W13-51P1D Four-point Contact Ball Slewing Rings | d:30 mm; Pu:1.282 kN; B:13.6 mm; D:49.2 mm; Grease:4 200 min-1; Dynamic (Ca):17.4 kN; Static (Coa):28.2 kN; Oil:0 min-1; |
| 1797/3230G2K3 Slewing Beairng | b:22.3 mm; Calculation factor kr:600; α:20 °; D:1440 mm; r1,2 min.:12 mm; K:12 mm; Fatigue load limit Pu:5700 kN; F:1133 mm; Mass bearing:5100 kg; Basic static load rating C0:93000 kN; |
| 022.60.4500 Slewing Bearing | Basic Dynamic Radial Load Rating C:133000 N; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:96500 N; d:85.000 mm; Accessories:Shield & Seal; Oil Speed Rating Open/Shielded n2:4300 rpm; B:41.00 mm; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:2400 rpm; Grease Speed Rating Open/Shielded n1:3600 rpm; |
| CRBH3510 Cross Roller Bearing 35x60x10mm | Fatigue load limit Pu:250 kN; B5:50 mm; Reference speed:1200 r/min; r1,2 min.:4 mm; B2:38 mm; d1:260 mm; B:106 mm; D:420 mm; ra max.:3 mm; Basic static load rating C0:3100 kN; |
| Ru445 Crossed Roller Bearing | rs (min):2.5 mm; r2s (min):0.6 mm; C:28 mm; Static (Coa):251 kN; Pu:29.550 kN; a:32 mm; T:35.25 mm; d2:80 mm; D:140 mm; r1s (min):2 mm; |
| 25 mm x 47 mm x 12 mm 111.32.1800 Slewing Bearing | Stabilizing ring:SR-0-40; Cap bolt:4 x 1 1/2-6 UNC; Ca:147.803 mm; H:495.3 mm; J1:139.7 mm; Pa:82.7 kN; Max. speed for Taconite seal:425 r/min; Mass pillow block:364 kg; da:182.563 mm; Taconite seal:TER 665; Size (mm):25 mm x 47 mm x 12 mm ; |
| VSA250755N Slewing Bearings (655x898x80mm) Turntable Bearing | K:5 mm; r1,2 min.:4 mm; das:291 mm; Mass bearing:85.5 kg; d1 ≈:302.8 mm; b1:9.4 mm; ra max.:3 mm; da min.:278 mm; Basic dynamic load rating C:2860 kN; D1 ≈:361.7 mm; |
| R305-7 Bearings | r3,4 min.:0.6 mm; Calculation factor fHC:1.01; d2:41.6 mm; Preload class A GA:60 N; r1,2 min.:1 mm; Static axial stiffness, preload class A:35 N/µm; Calculation factor f2B:1.03; Number of balls z:17; Reference grease quantity Gref:2.4 cm³; d:35 mm; |
| RB50040UU High Precision Cross Roller Ring Bearing | A3:38.1 mm; A2:27.102 mm; L:147.625 mm; Hexagonal head bolts:2 x 1/2-13x7/8; Mass locking plate:0.18 kg; A1:39.675 mm; B:3.175 mm; |