| 1797/3230G2K7 Bearing 3230x4100x252mm | Pu:2240 kN; Grease:4280 kN; rs (min):4 mm; Oil:358.430 kN; d:280 mm; Static (Cor):11.1 mm; Dynamic (Cr):6 mm; with tapered bore:850 min-1; D:420 mm; B:140 mm; |
| RB4510UUCC0 High Precision Cross Roller Ring Bearing | Basic Static Radial Load Rating Co:33500 N; Fillet Radius ra:1.00 mm; d:95.000 mm; D:130.0000 mm; B:18.00 mm; Sealed Speed Rating n3:2900 rpm; Oil Speed Rating Open/Shielded n2:5600 rpm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:4800 rpm; Basic Dynamic Radial Load Rating C:33800 N; |
| NRXT50050 Crossed Roller Bearing 500x625x50mm | Bearing:23026 CCK/W33; J1:69.85 mm; H1:125.425 mm; h:40.922 mm; Pa:20.2 kN; Eye bolt:2 x 3/8-16 UNC; P150°:59.6 kN; Max. speed for PosiTrac Plus seal:1300 r/min; Da:200 mm; Cap bolt recommended tightening torque:298.3 N·m; |
| 130.40.1800 Slewing Bearing | r3,4 min.:1 mm; s max.:3.3 mm; Da max.:119 mm; Basic dynamic load rating C:99 kN; Basic static load rating C0:127 kN; D1 ≈:109 mm; Calculation factor kr:0.1; B:22 mm; rb max.:1 mm; da max.:90 mm; |
| SH200A1 Slewing Bearing | Pa:7.12 kN; L:330.2 mm; Initial grease fill:218.29 g; J min.:250.825 mm; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt:2 x 5/8-11 UNC; P120°:23.1 kN; PG:1/8 NPT; Housing:FSAF 517; A2:198.438 mm; |
| CRBA11020 Crossed Roller Bearing (110x160x20mm) Industrial Robots Use | Oil Speed Rating Open/Shielded n2:7000 rpm; Basic Dynamic Radial Load Rating C:41000 N; Basic Static Radial Load Rating Co:32500 N; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.00 mm; D:110.0000 mm; B:20.00 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; d:70.000 mm; Sealed Speed Rating n3:3600 rpm; |
| 023.50.2500 Bearing 2285x2715x190mm | D:290.0000 mm; Oil Speed Rating Open/Shielded n2:2900 rpm; B:65.00 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; Basic Dynamic Radial Load Rating C:247000 N; Sealed Speed Rating n3:1600 rpm; d:105.000 mm; Fillet Radius ra:3.00 mm; Accessories:Seal & Snap-Ring; Basic Static Radial Load Rating Co:228000 N; |
| 24100N8102F1 Swing Bearing For KOBELCO SK150LC-III Excavator | with cylindrical bore:950 min-1; Grease:2410 kN; Static (Cor):16.7 mm; B:112 mm; rs (min):3 mm; Pu:1630 kN; Oil:218.170 kN; Dynamic (Cr):9 mm; d:200 mm; D:340 mm; |
| XV80 Table/slewing Bearing 80x135x18mm | Reference speed:2800 r/min; C:53 mm; da max.:107 mm; Calculation factor Y:1.1; d:90 mm; Dimension series:5GD; Da max.:177.5 mm; Fatigue load limit Pu:69.5 kN; Db min.:179 mm; d1 ≈:141.5 mm; |
| E.505.20.00.B Four-point Contact Ball Slewing Ring | Design variant/feature:TQOSN/GWISI; Calculation factor Y1:1.8; r1,2 min.:3.3 mm; D1 ≈:818 mm; Fatigue load limit Pu:1400 kN; r3,4 min.:6.4 mm; Calculation factor Y0:1.8; Mass bearing:505 kg; D:876.3 mm; d:685.8 mm; |