No. | Brand | C | K | A | T | a | G | h | b |
1.5inch | - | 8.5 mm | - | - | - | - | - | - | - |
5X9X3 | - | - | - | - | - | - | - | 45.244 mm | - |
1.5mm-3.5mm | - | - | - | - | - | - | 189.789 mm | - | - |
1312-TVH | fag | - | - | - | - | - | - | - | 2.6 mm |
31315 | koyo | - | - | - | - | - | - | - | - |
56-37-1 | - | - | - | - | - | - | - | - | - |
1200*1000*1000mm | - | - | - | - | - | - | - | - | - |
GSA2080 | - | - | - | - | - | - | - | - | - |
SO-4000FI | - | - | - | - | - | - | - | - | - |
6007ZZ | - | - | - | - | 34 mm | - | - | - | - |
SGR-G02-1-10, | DAIKIN | - | - | - | - | - | - | - | - |
10pcs | - | 20 mm | - | - | - | - | - | - | - |
P3Y231N | Link-Belt | - | - | - | - | - | - | - | - |
NK16/16 | INA | - | - | - | - | - | - | - | - |
(NH4)2SO4 | - | - | - | - | - | - | - | - | - |
5mm | - | - | - | - | - | - | Tr 480x5 | - | - |
SMR95zz | - | - | - | - | - | - | Tr 710x7 | - | 22.3 mm |
21.8*14 | - | - | - | - | - | - | 378.993 mm | - | - |
A8VO | Rexroth | - | - | - | - | - | - | - | - |
04-09 | NTN | - | - | - | - | - | - | - | - |
TT600 | - | - | - | - | - | - | - | - | - |
70 | - | - | - | - | - | - | - | - | - |
F606ZZ | - | - | - | - | - | - | - | - | - |
RU42UUCC0 Crossed Roller Bearing 20x70x12mm | Basic Dynamic Radial Load Rating 40º C1:199000 N; D:190.0000 mm; Oil Speed Rating n2:4000 rpm; B:86.00 mm; Grease Speed Rating n1:3000 rpm; Basic Static Radial Load Rating 15º Co1:204000 N; d:90.000 mm; Width Plain C2:186000 N; Fillet Radius rb:1.00 mm; Shielded or Sealed Co2:160000 N; |
RB20025 Cross Roller Bearing 200x260x25mm | B1:14 mm; B2:27 mm; d:240 mm; d1 ≈:282 mm; Mass angle ring:2.24 kg; r3,4 min.:3 mm; |
797/2500G2 Bearing 2500x2980x180mm | H1:152.4 mm; Bearing:22228 CCK/W33; Housing:SAFS 528; Cap bolt recommended tightening torque:813.5 N·m; Da:250 mm; P150°:105 kN; Taconite seal:TER 123; A1:149.225 mm; End plug (suffix Y):EPR 27; P120°:116 kN; |
RA19013C Crossed Roller Bearings 190x216x13mm | Mass lock nut:199 kg; d2:1160 mm; d1:1205 mm; G:Tr 1120x8; d3:1260 mm; B:100 mm; B5:125 mm; h:25 mm; Lock washer / Locking clip:MS 30/1000; b:60 mm; |
NRXT15025E/ Crossed Roller Bearings (150x210x25mm) | D:72.0000 mm; Fillet Radius ra:1.00 mm; B:27.00 mm; Accessories:One Shield & Snap-Ri; d:35.000 mm; Basic Static Radial Load Rating Co:36500 N; Oil Speed Rating n2:8000 rpm; Grease Speed Rating n1:6000 rpm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:39100 N; |
124.50.4000 Slewing Bearing | A5:18 mm; Hexagonal key size for grub screw N:2.5 mm; A1:22 mm; Limiting speed:1500 r/min; J max.:110 mm; Housing material:Cast iron; J6:120 mm; H1:36.5 mm; Fatigue load limit Pu:0.335 kN; d:25 mm; |
132.32.800 Slewing Bearing | Eye bolt:3/8-16 UNC; J max.:441.325 mm; Ca:77.8 mm; Housing:SAF 528; P60°:249 kN; Bearing:22228 CCK/W33; h:51.594 mm; N1:28.575 mm; Cap bolt:2 x 1-8 UNC; Da:250 mm; |
010.20.250 Slewing Bearing | Fatigue load limit Pu:0.655 kN; Basic dynamic load rating C:25.5 kN; Recommended tightening torque for grub screw:6.5 N·m; Mass bearing unit:0.81 kg; s1:25.4 mm; Hexagonal key size for grub screw N:3.969 mm; Thread grub screw G2:5/16-24 UNF; B:42.9 mm; d:31.75 mm; A:35 mm; |
R60-5 Slewing Bearing | Lw:7.8 mm; r2 max.:0.6 mm; Mass needle roller:0.048 g; r1 max.:0.4 mm; Dw:1 mm; r1,2 min.:0.1 mm; |
RB13015 Cross Roller Bearing 130x160x15mm | Oil Speed Rating n2:3800 rpm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:153000 N; d:70.000 mm; Sealed Speed Rating n3:2800 rpm; Grease Speed Rating n1:2800 rpm; B:66.70 mm; Accessories:No Shield, no Seal,; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:125000 N; |
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
113.40.1600.03K Bearing 1349.6x1776x160mm Video