No. | Brand | C | K | A | T | a | G | h | b |
GB-2414 | koyo | - | 4.5 mm | - | - | - | - | - | - |
XS850 | - | - | - | - | - | - | - | - | - |
7211C | - | 32 mm | - | - | - | 59.671 mm | - | - | - |
4 | - | - | - | - | - | - | - | - | - |
4T-21212 | NTN | - | - | - | - | - | - | 42.069 mm | - |
+001 | - | - | - | - | - | 3 mm | - | - | - |
500 0249 11 | - | - | - | - | - | - | - | - | - |
1 | Bower | - | - | - | - | - | - | - | - |
25mm | - | - | - | - | - | - | - | - | - |
6901-2RS | - | - | - | - | - | - | - | - | - |
F-555102.01 | - | - | - | - | - | - | - | - | - |
6324 | - | - | - | - | - | - | - | - | - |
19M-04-11220 | - | - | - | - | - | - | - | - | - |
32% | - | - | - | - | - | - | - | - | - |
4X8 | INA | 3.71 mm | - | - | - | - | - | - | 3.1 mm |
7205 | fag | - | - | - | - | - | - | - | - |
TB22432H | - | - | - | - | - | - | - | - | - |
9mm/ | - | - | - | - | - | - | - | - | - |
38X30 | - | - | - | - | - | - | - | 79.375 mm | - |
161.20.1904) | - | - | - | - | - | - | - | - | - |
6mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
12mm | INA | - | - | - | - | - | - | - | - |
RA19013C Crossed Roller Bearings 190x216x13mm | Mass lock nut:199 kg; d2:1160 mm; d1:1205 mm; G:Tr 1120x8; d3:1260 mm; B:100 mm; B5:125 mm; h:25 mm; Lock washer / Locking clip:MS 30/1000; b:60 mm; |
SH240-3 Slewing Bearing | Associated spanner (Hook spanner in accordance with DIN 1810):HN 14; Recommended tightening torque:8.4 N·m; G:M 65x2; d1:85 mm; Mass:0.63 kg; Grub (set) / Locking screw size:M 5; d3:90 mm; b:8 mm; B:28 mm; h:3.5 mm; |
RB90070 Precision Cross Roller Bearing | R1:163.512 mm; RG:1 NPT; Da:419.999 mm; Adapter sleeve assembly:SNW 140x7.1/8; Eye bolt:2 x 1/2-13 UNC; Housing:SSAFS 640; S:4.763 mm; A2:379.425 mm; Taconite seal:TER 664; Cap bolt, SAE grade:8; |
114-1434 Swing Bearing For Caterpillar 330BL Excavator | da min.:27.5 mm; Design (sliding contact surface combination):Steel/steel; Basic static load rating C0:166 kN; r2 min.:1 mm; α:6 °; B:22.225 mm; C:19.05 mm; Basic dynamic load rating C:83 kN; b:3.2 mm; ra max.:0.3 mm; |
7787/2728K Slewing Bearing | B:48.00 mm; Basic Static Radial Load Rating Co:125000 N; Sealed Speed Rating n3:2300 rpm; Basic Dynamic Radial Load Rating C:163000 N; Grease Speed Rating Open/Shielded n1:3400 rpm; D:200.0000 mm; Accessories:Two Shields & Snap-R; d:80.000 mm; Fillet Radius ra:2.50 mm; Oil Speed Rating Open/Shielded n2:4000 rpm; |
CRBE 16035 B Cross Roller Ring 160x295x35mm | h:57.15 mm; Ca:101.803 mm; A1:190.5 mm; R1:120.65 mm; Mass pillow block:214 kg; da:203.2 mm; Da:339.999 mm; Cap bolt recommended tightening torque:1735.4 N·m; P90°:249 kN; P60°:416 kN; |
RE 50025 Crossed Roller Bearing 500x550x25mm | H1:250.825 mm; R1:163.512 mm; Bearing:23056 CCK/W33; Eye bolt:2 x 1/2-13 UNC; H:495.3 mm; Cap bolt recommended tightening torque:4284.4 N·m; J max.:749.3 mm; h:73.025 mm; P120°:249 kN; L:869.95 mm; |
133.32.900 Slewing Bearing | D:130 mm; Dynamic (Cr):3 mm; Grease:315 kN; Static (Cor):5.5 mm; Pu:304 kN; rs (min):2.1 mm; with tapered bore:3 600 min-1; B:46 mm; d:60 mm; with cylindrical bore:2 800 min-1; |
XSU140944 Crossed Roller Slewing Ring Slewing Bearing | D1 ≈:38.45 mm; Basic dynamic load rating C:13.5 kN; Limiting speed:24000 r/min; Fatigue load limit Pu:0.28 kN; ra max.:1 mm; Calculation factor f0:13.1; da min.:25.6 mm; d:20 mm; Calculation factor kr:0.025; d1 ≈:28.8 mm; |
ZP2 Slewing Bearing | s:36.513 mm; L:330.2 mm; B:102.394 mm; Mass bearing unit:14.3 kg; S:0.794 mm; d2:130.175 mm; H2:57.15 mm; A:80.963 mm; H1:95.25 mm; Basic dynamic load rating C:253 kN; |
VRT 3155A Cross Roller Table 40x155x16mm Video