No. | Brand | C | K | A | T | a | G | h | b |
18mm | - | - | - | - | - | - | - | - | - |
NN3016 | - | - | - | - | - | - | - | - | - |
B500x10m | - | - | - | - | - | - | - | - | - |
YZ-027 | INA | - | - | - | - | - | - | - | - |
KVC925 | - | - | - | - | - | - | - | - | - |
2201 | - | - | - | - | - | - | - | - | - |
2 | - | - | - | - | - | - | - | - | - |
20/925080 | Rexroth | - | - | - | - | - | - | - | - |
25MM | - | - | - | - | - | - | M 28x1.5 | - | - |
20x27x4mm | - | - | - | - | - | - | - | - | - |
30206J2/Q | SKF | - | - | - | - | - | - | - | - |
GE17 | - | - | - | - | - | - | - | - | - |
CL2B-DA07 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
NA8W | - | - | - | - | - | - | - | - | - |
HS7021-E-T-P4S | - | - | - | - | - | - | - | - | - |
RV063 | - | - | - | - | - | - | - | - | - |
10mm-80mm | - | - | - | - | - | - | - | - | 22.3 mm |
6011 | - | - | - | - | - | - | Tr 950x8 | - | - |
6700ZZ-6706ZZ | - | - | - | - | - | - | - | - | - |
24W | - | - | - | - | - | - | - | - | - |
E2 | INA | - | - | - | - | - | - | - | - |
sbs-5508 | - | - | - | - | - | - | - | - | - |
2797/1010GK Bearing 1010x1200x90mm | Oil Speed Rating n2:6000 rpm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:53000 N; d:45.000 mm; Basic Dynamic Radial Load Rating C:72800 N; Grease Speed Rating n1:4500 rpm; B:42.90 mm; Sealed Speed Rating n3:4500 rpm; Fillet Radius ra:1.50 mm; D:100.0000 mm; |
Excavator Slewing Ring For PC600LC-7, Part Number:21M-25-11100 | H2:41.275 mm; R2:27.781 mm; Cap bolt:2 x 5/8-11 UNC; R1:60.325 mm; H1:101.6 mm; da:82.55 mm; Cap bolt, SAE grade:5; PG:1/8 NPT; Mass pillow block:21.4 kg; A1:98.425 mm; |
RB50050 Precision Cross Roller Bearing | Speed Rating-Single and Double Sealed Grease SDG:6300 rpm; Basic Interchange FAF:207KLL; d:35.000 mm; Basic Interchange BCA:-; Width - Outer Ring B0:17.0 mm; D:72.0000 mm; Basic Radial Load Rating-Dynamic DC:25500 N; Basic Interchange NDH:88507; Accessories:88000 Two Seals; Width - Inner Ring B1:25.00 mm; |
150997A1 Swing Bearing For CASE 9020 Excavator | D:480 mm; da min.:391 mm; B:100 mm; ra max.:2 mm; Limiting speed:1000 r/min; Da max.:469 mm; F:415 mm; r1,2 min.:2.1 mm; Reference speed:900 r/min; d:380 mm; |
RK6-37N1Z Slewing Bearings (33.133x41.26x2.205inch) With Internal Gear | d:30 mm; r3,4 min.:1.1 mm; B1:5 mm; d1 ≈:44.95 mm; B2:8.5 mm; Mass angle ring:0.042 kg; |
XR635070 Cross Tapered Roller Bearing 300x400x38mm | Width - Inner Ring B1:68.26 mm; Fillet Radius ra:2.00 mm; Width - Outer Ring B0:37.0 mm; Accessories:300SWI Non-Filling N; D:160.0000 mm; Basic Radial Load Rating-Static SCO:85000 N; Speed Rating-Open and Shielded-Oil OSO:5000 rpm; Diameter E:98.9 mm; Basic Radial Load Rating-Dynamic DC:121000 N; Speed Rating-Open and Shielded-Grease OSG:4300 rpm; |
YRT 80 TN Rotary Table Bearing 80x146x35mm | Basic Static Radial Load Rating Co:228000 N; D:160.0000 mm; Fillet Radius rb:1.00 mm; d:75.000 mm; B:74.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4000 rpm; Basic Dynamic Radial Load Rating C:225000 N; Grease Speed Rating n1:3100 rpm; |
XR496052 Cross Tapered Roller Bearing 203.2x279x31.75mm | da min.:331 mm; D1 ≈:493 mm; Calculation factor Y2:2.9; Basic dynamic load rating C:4607 kN; Limiting speed:950 r/min; G:Tr 340x5; Calculation factor Y1:1.9; B2 ≈:254 mm; B1:246 mm; Mass bearing + sleeve:250 kg; |
EX60-1 Slewing Bearing | Hydraulic nut:HMV 30 E; Nut for removal:KM 30; d1:135 mm; B2:109 mm; B1:99 mm; G1:14 mm; Mass withdrawal sleeve:1.3 kg; G:M 150x2; d:140 mm; |
XSU080318 Cross Roller Bearings,XSU080318 Bearings SIZE 280x355x25.4mm | Sealed Speed Rating n3:3800 rpm; D:120.0000 mm; B:49.20 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5000 rpm; Accessories:Shield & Seal & Snap; Grease Speed Rating n1:3800 rpm; d:55.000 mm; Basic Dynamic Radial Load Rating C:106000 N; Basic Static Radial Load Rating Co:81500 N; |
VRT 1085A Cross Roller Table 20x85x8mm Video