No. | Brand | C | K | A | T | a | G | h | b |
508-607 | SKF | - | - | - | - | - | - | - | - |
394 | koyo | - | - | - | - | - | - | - | - |
1973-1976 | Timken | - | - | - | - | - | - | - | - |
30% | - | 787.4 mm | - | - | - | - | - | - | 22.3 mm |
3mm | - | - | - | - | - | - | - | - | - |
SUS304 | - | - | - | - | - | - | Tr 670x6 | 20 mm | 45 mm |
1216 | NSK | - | - | - | - | - | - | - | - |
Ex200-1 | Hitachi | - | - | - | - | - | - | - | - |
18mm | INA | - | - | - | - | - | - | - | - |
F61901 | - | - | - | - | - | - | - | - | - |
5mm-50mm | - | 14 mm | - | - | 20.75 mm | 23 mm | - | - | - |
1205 | koyo | - | - | - | - | - | - | - | - |
S6205 | - | - | - | - | - | - | - | - | 22.3 mm |
TS185K | NTN | - | - | - | - | - | - | - | - |
WB000039 | Timken | - | - | - | - | - | - | - | - |
125 | - | 27 mm | - | - | - | 27 mm | - | - | - |
031733075 | - | - | - | - | - | - | - | - | - |
5PC | INA | - | - | - | - | - | - | - | - |
5x8x2.5 | - | - | - | - | - | - | - | - | - |
17 | - | - | - | - | - | - | - | - | - |
24100N7440F1 Swing Bearing For KOBELCO SK200LC III Excavator | ra max.:4 mm; Dimension series:7GB; D:200 mm; r3,4 min.:3 mm; Calculation factor Y0:0.4; a:59.671 mm; Fatigue load limit Pu:39 kN; Db min.:187 mm; C:32 mm; B:45 mm; |
RU228X Cross Roller Bearing 160x295x35mm | Grease Speed Rating n1:5000 rpm; D:120.0000 mm; d:55.000 mm; Basic Dynamic Radial Load Rating C:50700 N; Basic Static Radial Load Rating Co:18000 N; Oil Speed Rating n2:6000 rpm; B:29.00 mm; Fillet Radius ra:2.00 mm; |
M6-39P1 Angular Contact Ball Slewing Rings | Basic Dynamic Radial Load Rating C:676000 N; Oil Speed Rating n2:1400 rpm; B:95.00 mm; Fillet Radius ra:4.00 mm; d:240.000 mm; Fillet Radius rb:1.50 mm; Basic Static Radial Load Rating Co:1060000 N; Grease Speed Rating n1:1100 rpm; D:500.0000 mm; |
123.40.2240 Slewing Bearing | db:104.775 mm; Housing:SAFS 218; Initial grease fill:286.33 g; Taconite seal (db shaft position):TER 112; ba:40.481 mm; P180°:58.7 kN; Max. speed for Taconite seal:750 r/min; P150°:48 kN; Pa:37.8 kN; Da:160 mm; |
SX011820 Cross Roller Bearing 100x125x13mm | Ball diameter Dw:5.556 mm; Preload class A GA:35 N; Static axial stiffness, preload class A:35 N/µm; Calculation factor f0:10.4; r3,4 min.:0.3 mm; da min.:38.2 mm; Calculation factor f:1.1; Calculation factor f2D:1.18; Static axial stiffness, preload class D:91 N/µm; rb max.:0.3 mm; |
RE14025 Cross Roller Bearings,RE14025 Bearings140x200x25mm | d2:21.1 mm; da min.:19 mm; Ball diameter Dw:5.556 mm; r1,2 min.:0.3 mm; Fatigue load limit Pu:0.104 kN; Da max.:33 mm; Calculation factor (single, tandem) Y2:0.87; Calculation factor (back-to-back, face-to-face) Y1:0.92; Preload class A GA:50 N; Calculation factor (back-to-back, face-to-face) Y2:1.41; |
2792/1400G2K Bearing 1400x1715x110mm | Pa:89 kN; P60°:669 kN; End plug (suffix Y):X-5217-2; A2:379.425 mm; Taconite seal:2 x TER 519; Mass pillow block:298 kg; Adapter sleeve assembly:SNP 3056x10.1/2; P180°:267 kN; Eye bolt:2 x 1/2-13 UNC; PG:1/4 NPT; |
VLU200844 Four Point Contact Slewing Ring Bearing | Fillet Radius ra:0.30 mm; d:10.000 mm; Basic Dynamic Radial Load Rating C:5070 N; Fillet Radius rb:0.10 mm; Grease Speed Rating n1:61000 rpm; D:22.0000 mm; Basic Static Radial Load Rating Co:3100 N; Oil Speed Rating n2:88000 rpm; B:12.00 mm; |
SK235 Slewing Bearing | Cap bolt:2 x 7/16-14 UNC; Max. speed for Taconite seal:1800 r/min; P180°:12.5 kN; Pa:2.98 kN; da:42.862 mm; L:209.55 mm; A2:165.1 mm; P60°:28.9 kN; Ca:29.794 mm; N1:15.875 mm; |
Excavator Slewing Ring For KOMATSU PC210LC-6LE, Part Number:20Y-25-21200 | r1,2 min.:2 mm; Preload class A GA:420 N; Preload class B GB:840 N; B:28 mm; da min.:119 mm; Calculation factor f2A:1; Mass bearing:1.97 kg; Calculation factor f2B:1.02; Da max.:161 mm; db min.:119 mm; |
RB25025 Cross Roller Bearings 250*310*25mm Video