| MTE-210 Slewing Bearings(210x373x40mm) (8.268x14.686x1.575inch) With External Gear | Mass pillow block:90.3 kg; Pa:37 kN; J1:85.725 mm; J min.:406.4 mm; Eye bolt:3/8-16 UNC; Stabilizing ring:SR-28-0; Cap bolt recommended tightening torque:515.2 N·m; L:511.175 mm; Ca:92.939 mm; Bearing:23228 CCK/W33; |
| 21P-25-K1100 Swing Bearing For Komatsu PC180LC-6K Excavator | d1:150 mm; d:70 mm; D1:73 mm; dynamic Cr:272.500 kN; H:60 mm; Pu:23.970 kN; Grease:1 200 min-1; rs (min):2 mm; Oil:1 600 min-1; D:150 mm; |
| 114.50.4000 Slewing Bearing | Fillet Radius ra:1.00 mm; Grease Speed Rating n1:6700 rpm; d:45.000 mm; B:19.00 mm; Basic Dynamic Radial Load Rating C:39000 N; D:85.0000 mm; Oil Speed Rating n2:9000 rpm; Basic Static Radial Load Rating Co:27500 N; |
| 131.32.900 Slewing Bearing | Cap bolt:2 x 5/8-11 UNC; ba:35.719 mm; H1:101.6 mm; N1:22.225 mm; R1:60.325 mm; P150°:40.5 kN; A1:98.425 mm; J min.:263.525 mm; J max.:295.275 mm; End plug (suffix Y):EPR 7; |
| PC220-6(S6D95) Slewing Bearing | r3,4 min.:1.5 mm; Basic dynamic load rating C:72.1 kN; Cb min.:3.5 mm; Ca min.:3 mm; Calculation factor Y:1.2; Da max.:101 mm; Da min.:98 mm; a:23.735 mm; Reference speed:4500 r/min; Dimension series:L 814700; |
| RA7008 RA7008UUC0 High Precision Cross Roller Bearing | Cap bolt:4 x 1-8 UNC; P90°:254 kN; R2:46.831 mm; P180°:173 kN; PG:1/4 NPT; H1:241.3 mm; Housing:SAF 638; Pa:75.6 kN; L:831.85 mm; P120°:160 kN; |
| CRBF8022A High Precision Crossed Roller Bearing | D:520 mm; H:112 mm; da min.:511 mm; Mass bearing:75 kg; d1:515 mm; r1,2 min.:4 mm; Limiting speed:500 r/min; Basic dynamic load rating C:2080 kN; d:380 mm; Minimum axial load factor A:8; |
| 282.30.0900.013 Four Contact Ball Slewing Ring 812x1100x90mm | P150°:33.4 kN; P90°:59.6 kN; PG:1/8 NPT; Stabilizing ring:SR-15-0; Adapter sleeve assembly:SNW 15x2.3/8; Mass pillow block:14.3 kg; H:161.925 mm; P60°:104 kN; P120°:36.9 kN; Bearing limiting speed:6300 r/min; |
| M4-12P4 Angular Contact Ball Slewing Rings | Calculation factor Y1:2.3; Calculation factor Y0:2.2; B:258 mm; K:15 mm; Reference speed:20 r/min; d2 ≈:640 mm; ra max.:5 mm; da min.:583 mm; b:53.2 mm; d:560 mm; |
| 792/1000G2K Slewing Bearing | Threads per inch:18; B4:14.3 mm; Mass adapter sleeve assembly:0.36 kg; Sleeve:S 11x2; G:54.788 mm; B1:46.609 mm; Lock washer:W 11; d3 max.:75.54 mm; d:55 mm; Hydraulic nut:HMVC 11E; |