| EX300-5 Slewing Bearing | D:360.0000 mm; Basic Dynamic Radial Load Rating C:637000 N; Grease Speed Rating n1:1300 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:1080000 N; d:200.000 mm; B:116.00 mm; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:1600 rpm; |
| XR855056 Cross Tapered Roller Bearing 685.8x914.4x79.375mm | PosiTrac Plus contact element:2 x B10724-37; P150°:40.5 kN; Bearing:22315 EK; h:40.481 mm; Cap bolt recommended tightening torque:298.3 N·m; R1:60.325 mm; da:61.913 mm; Initial grease fill:141.75 g; Max. speed for PosiTrac Plus seal:2350 r/min; S:4.763 mm; |
| CRBC 10016 Crossed Roller Bearings 100x140x16mm Industrial Robots Arm Use | Basic Radial Load Rating-Static SCO:2400 N; Basic Interchange NDH:8500; Basic Interchange FAF:200KL; Speed Rating-Single and Double Sealed Grease SDG:17000 rpm; Fillet Radius ra:0.64 mm; Accessories:8000 One Seal; Old MRC Bearing Number:200FS; Width - Overall B:12.7 mm; d:10.000 mm; Width - Inner Ring B1:12.20 mm; |
| VSA250855N Slewing Bearings (755x997x80mm) Turntable Bearing | r, r1,2 min.:0.3 mm; B:20.5 mm; d:40 mm; F:45 mm; Mass inner ring:0.052 kg; |
| RB40040 Cross Roller Ring 400x510x40mm | d4 ≈:25 mm; r1 min.:0.3 mm; dk:25 mm; α:10 °; d:17 mm; h1:67 mm; C1 max.:11.5 mm; l3 min.:24 mm; G:M 16; Material constant KM:330; |
| R200 Bearings | Cap bolt recommended tightening torque:81.3 N·m; J min.:187.325 mm; N1:19.05 mm; Cap bolt, SAE grade:5; End plug (suffix Y):EPR 5; P180°:19.1 kN; L:244.475 mm; Housing:SAF 511; P120°:17.3 kN; H:133.35 mm; |
| CRBA13025 Crossed Roller Bearing (130x190x25mm) Industrial Robots Use | d1:78 mm; D:78 mm; D1:52 mm; static Cor:111.000 kN; Pu:5.050 kN; Grease:2 800 min-1; rs (min):1 mm; d:50 mm; Oil:3 800 min-1; H:22 mm; |
| 1792/1400G2 Slewing Beairng | C:26 mm; r1,2 min.:2.5 mm; Calculation factor Y0:0.8; d:90 mm; Dimension series:3FB; Db min.:150 mm; Cb min.:6.5 mm; a:31.033 mm; Da max.:150 mm; r3,4 min.:2 mm; |
| NRXT10020E Crossed Roller Bearing 100x150x20mm | B:30.20 mm; d:35.000 mm; Accessories:One Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:39100 N; Sealed Speed Rating n3:6000 rpm; Basic Static Radial Load Rating Co:36500 N; Grease Speed Rating n1:6000 rpm; D:72.0000 mm; Oil Speed Rating n2:8000 rpm; Fillet Radius ra:1.00 mm; |
| XU050077 Slewing Bearing | Fillet Radius ra:0.64 mm; Accessories:One Seal; d:9.000 mm; Oil Speed Rating Open/Shielded n2:34000 rpm; D:26.0000 mm; B:8.00 mm; Basic Static Radial Load Rating Co:1960 N; Grease Speed Rating Open/Shielded n1:28000 rpm; Sealed Speed Rating n3:20000 rpm; Basic Dynamic Radial Load Rating C:4620 N; |