| 024.30.1000 Slewing Bearing | Basic Static Radial Load Rating Co:48000 N; B:38.10 mm; Sealed Speed Rating n3:5600 rpm; D:80.0000 mm; Grease Speed Rating n1:5600 rpm; Accessories:One Seal & Snap-Ring; d:35.000 mm; Basic Dynamic Radial Load Rating C:52300 N; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:7500 rpm; |
| CRBC 17020 Crossed Roller Bearings 170x220x20mm Industrial Robots Arm Use | D:90.0000 mm; d:40.000 mm; Width C:23 mm; B:58.00 mm; Basic Static Radial Load Rating Co:11200 N; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating:33800 N; Grease or Oil Speed Rating n1:4500 rpm; |
| RU 178 Crossed Roller Bearing 115x240x28mm | D1 ≈:442 mm; da max.:344 mm; Limiting speed:1400 r/min; F:351 mm; r1,2 min.:5 mm; Basic static load rating C0:5300 kN; d:300 mm; s max.:7.3 mm; Mass bearing:155 kg; r3,4 min.:5 mm; |
| 132.50.4000.12K Slewing Bearing | Calculation factor e:0.31; db min.:44.5 mm; Cb min.:4.5 mm; Da min.:70 mm; d:35 mm; Da max.:72.5 mm; D:80 mm; Db min.:74 mm; Limiting speed:9000 r/min; C:18 mm; |
| VLU200544 Slewing Bearing Manufacturer 434x648x56mm | Cap bolt recommended tightening torque:813.5 N·m; H1:160.35 mm; dc:146.05 mm; P90°:236 kN; da:150 mm; Cap bolt:7/8-9 UNC; Ca:82.804 mm; Bearing limiting speed:3000 r/min; Labyrinth ring (db shaft position):LOR 151; Da:269.999 mm; |
| NRXT9020 Crossed Roller Bearing 90x140x20mm | L:244.475 mm; Appropriate attachment bolt size G:0.625 in; P180°:14.7 kN; da:34.925 mm; Housing:SAF 609; A2:106.362 mm; Bearing:1309 EKTN9; Cap bolt recommended tightening torque:149.1 N·m; Cap bolt, SAE grade:8; Adapter sleeve assembly:SNW 9x1.3/8; |
| 110.40.2240.12 Bearing 2065x2418x112mm | Bearing:22230 CCK/W33; P90°:138 kN; Ca:82.804 mm; da:134.938 mm; Cap bolt, SAE grade:5; RG:3/4 NPT; Eye bolt:2 x 3/8-16 UNC; Max. speed for Taconite seal:590 r/min; J max.:463.55 mm; A1:158.75 mm; |
| Slewing Bearing For Komatsu PC300-7 Excavator | A2:379.413 mm; Mass pillow block:316 kg; Da:419.999 mm; Cap bolt recommended tightening torque:4284.4 N·m; J1:139.7 mm; RG:1 NPT; H:495.3 mm; J min.:666.75 mm; Eye bolt:2 x 1/2-13 UNC; Initial grease fill:3515.4 g; |
| 2797/1010G2 Bearing 1010x1200x90mm | d:130 mm; Threads per inch:12; Hydraulic nut:HMVC 26E; G:129.692 mm; d3 max.:155.702 mm; Lock nut:N 026; B1:81.966 mm; Mass adapter sleeve assembly:3.4 kg; d1:112.713 mm; B:22.479 mm; |
| A10-110P2D Four Point Contact Ball Slewing Bearings SLEWING RINGS | s1 max.:14.1 mm; Limiting speed:1000 r/min; r1,2 min.:2.1 mm; Fatigue load limit Pu:93 kN; B:56 mm; Misalignment factor k1:0.113; Operating clearance factor k2:0.108; B2 ≈:77 mm; Mass bearing + sleeve:8.9 kg; da max.:190 mm; |