No. | Brand | C | K | A | T | a | G | h | b |
80°C | - | - | - | - | - | - | - | - | - |
7er | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
ABEC-7 | - | - | - | - | - | - | - | - | - |
21% | - | - | - | - | - | - | - | - | - |
3723572220 | Rexroth | - | - | - | - | - | 199.314 mm | - | - |
12/15/18/21mm | - | - | - | - | - | - | - | - | - |
350 | NTN | - | - | - | - | - | - | - | - |
1974 | John Deere | - | - | 6 mm | - | - | Tr 530x6 | - | - |
25-150 | - | - | - | - | - | - | - | - | - |
6005 | Nachi | - | - | - | - | - | - | - | - |
5L-2660 | - | - | - | - | - | - | - | - | - |
10 | - | - | - | - | - | - | - | - | - |
30x62X20 | - | - | - | - | - | - | - | - | - |
W0133-1617928-KOY | koyo | - | - | - | - | - | - | - | - |
1980-1983 | Timken | - | - | - | - | - | - | - | 22.3 mm |
CL2B-DA08 | - | - | - | - | - | - | - | - | - |
6016 | NTN | - | - | - | - | - | - | - | - |
2005-2010 | - | - | - | - | - | 27 mm | - | - | - |
24x11x8 | - | - | - | - | - | - | - | - | - |
15-25-15 | - | - | - | - | - | 6 mm | - | - | - |
5203-A | Nachi | - | - | - | 44.5 mm | - | - | - | - |
GR400 | - | - | - | - | - | - | - | - | 6 mm |
st4090 | - | - | - | - | - | - | - | - | - |
304 | - | - | - | - | - | - | - | - | - |
T30 | Bower | - | - | - | - | - | - | - | - |
1787/710G2 Slewing Beairng | Permissible sliding velocity v max.:0.5 m/s; Tolerance housing:H7; Specific static load factor K0:45 N/mm²; a:6 mm; Coefficient of friction µ max.:0.15; α:124 °; Tolerance shaft:e7; Mass bushing:6.97 kg; Specific dynamic load factor K:25 N/mm²; d:200 mm; |
CRBA25040 Cross-Roller Ring (250x355x40mm) Rotary Units Of Manipulators Use | Basic dynamic load rating C:84.5 kN; S:0.794 mm; A1:75.406 mm; A:57.15 mm; da:49.212 mm; s:25.4 mm; B:73.025 mm; Mass bearing unit:4.99 kg; Attachment bolt diameter G:12.7 mm; A5:27.781 mm; |
010.40.1000 Slewing Bearing | Ca:147.803 mm; Housing:SAF 340; Cap bolt, SAE grade:5; J max.:749.3 mm; Labyrinth ring (db shaft position):LOR 175; h:87.313 mm; A1:228.6 mm; P120°:169 kN; P90°:271 kN; P60°:449 kN; |
W16-84P1 Four-point Contact Ball Slewing Rings | α:7 °; Mass plain bearing:21.5 kg; Da max.:213.5 mm; Da min.:197 mm; d1 ≈:178.3 mm; Basic static load rating C0:5200 kN; dk:207.162 mm; ra max.:2 mm; Lubricant:Regular relubricatio; rb max.:1.1 mm; |
CRBE 09025 A Cross Roller Bearing 90x210x25mm | d:150 mm; Calculation factor Y1:1.5; Db min.:216 mm; T:112 mm; K:3 mm; Reference speed:1800 r/min; rc max.:1 mm; Calculation factor Y2:2.2; ra max.:3 mm; Basic static load rating C0:1320 kN; |
Excavator Slewing Ring For KOMATSU PC200-7B, Part Number:20Y-25-21200 | Q180°:2100 kN; P180°:3000 kN; L:950 mm; P90°:3600 kN; P55°:7500 kN; H:675 mm; Lock nut:HM 56 T; Appropriate attachment bolt, rec. tightening torque:2280 N·m; Bearing (basic designation):22356; Initial grease fill, 40%:9.4 kg; |
SH240-5 Slewing Bearing | r1,2 min.:1 mm; D1:112 mm; D:145 mm; Mass housing washer:0.39 kg; B:7 mm; |
RK6-43P1Z Heavy Duty Slewing Ring Bearing With No Gear | D:120 mm; Tolerance shaft:e7; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.08; Coefficient of friction µ max.:0.15; Mass bushing:2.4 kg; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; h:101.5 mm; |
227-6094 Swing Bearing For Caterpillar 345BL II Excavator | D:72.0000 mm; Oil Speed Rating n2:8500 rpm; Accessories:One Shield & Snap-Ri; Fillet Radius ra:1.00 mm; B:33.30 mm; Grease Speed Rating n1:6300 rpm; d:30.000 mm; Basic Static Radial Load Rating Co:43000 N; Sealed Speed Rating n3:6300 rpm; Basic Dynamic Radial Load Rating C:46800 N; |
278790G2 Bearing 450x654.8x92mm | S:4.763 mm; H:473.075 mm; Cap bolt, SAE grade:8; Labyrinth ring (db shaft position):LOR 179; P150°:236 kN; Stabilizing ring:SR-44-38; R1:130.175 mm; Housing:SSAFS 244; Ca:117.805 mm; Da:399.999 mm; |
RE9016 Cross Roller Bearings,RE9016 Bearings SIZE 90x130x16mm Video