No. | Brand | C | K | A | T | a | G | h | b |
90% | - | - | - | - | - | - | - | - | - |
3/4" | - | - | - | - | - | - | - | 101.5 mm | - |
20ft | - | - | 12 mm | - | - | - | Tr 600x6 | - | 22.3 mm |
MS2659P-10 | TRW | - | - | - | - | - | - | - | - |
3.6mm | - | - | - | - | - | - | - | - | - |
1986-1990 | Timken | - | - | - | - | - | - | - | - |
10pcs | - | 20 mm | - | - | - | - | - | - | - |
5 | - | - | - | - | - | - | - | - | - |
NU414W | NSK | - | - | - | - | - | M 17x1 | 2 mm | 4 mm |
75% | - | - | - | - | - | - | - | - | - |
2085 | - | - | - | - | - | - | - | - | - |
18mm | - | - | - | - | - | - | - | - | - |
MHC2-20D | INA | - | - | - | - | - | - | - | - |
NJ210M | Nachi | - | - | - | - | - | 149.555 mm | - | - |
304 | - | - | - | - | - | 40.528 mm | - | - | - |
4X8 | - | - | - | - | - | - | 179.476 mm | - | - |
9 | - | - | - | - | - | - | - | - | - |
24954-59J30-000 | - | - | - | - | - | - | - | - | - |
6016-N | fag | - | - | - | - | - | - | - | - |
RV63 | - | - | - | - | - | - | - | 50.8 mm | - |
19x8.5 | - | - | - | - | - | - | - | - | - |
SY416 | - | - | - | - | - | - | - | - | - |
H12WXBBL49D | Parker | - | - | - | - | - | M 30x1.5 | 2 mm | 5 mm |
2pcs | - | - | - | - | - | - | - | - | - |
6389 | SKF | - | - | - | - | - | - | - | - |
41.250515 | Nachi | 17.5 mm | - | - | - | - | - | - | - |
NRXT15030DD Crossed Roller Bearing 150x230x30mm | dynamic Cr:277.130 kN; Oil:1 100 min-1; static Cor:1040.000 kN; d1:297 mm; H:45 mm; Grease:840 min-1; Pu:28.770 kN; D:300 mm; D1:243 mm; d:240 mm; |
RB20035UUC0 High Precision Cross Roller Ring Bearing | Cap bolt, SAE grade:8; Bearing limiting speed:2800 r/min; Labyrinth ring:2 x LOR 110; Da:240 mm; Mass pillow block:69.3 kg; Cap bolt:2 x 1-8 UNC; ba:63.5 mm; PG:1/4 NPT; J min.:371.475 mm; R1:79.375 mm; |
HS6-16P1Z Bearings | d:75.000 mm; Basic Dynamic Radial Load Rating C:168000 N; Oil Speed Rating n2:3600 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:140000 N; Accessories:Shield & Seal & Snap; Grease Speed Rating n1:2600 rpm; Sealed Speed Rating n3:2600 rpm; B:68.30 mm; D:160.0000 mm; |
RA10008 Cross Roller Bearing 100x116x8mm | b:22.3 mm; Basic dynamic load rating C:2722 kN; B1:190 mm; r1,2 min.:5 mm; Basic static load rating C0:3550 kN; db min.:276 mm; K:12 mm; B4:39 mm; Da max.:460 mm; da max.:312 mm; |
787/1700KM Slewing Bearing 1700x2000x150mm | Fillet Radius ra:1.00 mm; D:95.0000 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Grease Speed Rating Open/Shielded n1:6700 rpm; d:60.000 mm; Basic Static Radial Load Rating Co:25000 N; B:18.00 mm; Sealed Speed Rating n3:4300 rpm; Accessories:Snap-Ring; Basic Dynamic Radial Load Rating C:32500 N; |
RKS.161.14.0844 Cross Roller Slewing Bearing With External Gear | G1:9 mm; B2 ≈:56 mm; Operating clearance factor k2:0.105; s1 max.:7.1 mm; B1:52 mm; Da min.:123 mm; Mass bearing + sleeve:3 kg; da min.:90.6 mm; Basic static load rating C0:320 kN; D:150 mm; |
232.20.1000.013 Four Contact Ball Slewing Ring 986x1198x56mm | Mass withdrawal sleeve:265 kg; G1:50 mm; d:850 mm; Hydraulic nut:HMV 180 E; d1:800 mm; B1:415 mm; G2:G 1/4; B2:445 mm; Nut for removal:HM 31/900; G:Tr 900x7; |
L6-37E9Z Four-point Contact Ball Slewing Rings With External Gear | Basic dynamic load rating C:1205 kN; Da max.:541 mm; Limiting speed:900 r/min; da max.:482 mm; C:57.15 mm; Reference speed:670 r/min; Cb min.:17 mm; r3,4 min.:6.4 mm; d:457.2 mm; Fatigue load limit Pu:228 kN; |
134.40.1600 Slewing Beairng | Appropriate attachment bolt size G:0.75 in; PG:1/4 NPT; H1:114.3 mm; Initial grease fill:365.71 g; End plug (suffix Y):EPR 11; L:387.35 mm; Mass pillow block:34.7 kg; Ca:69.799 mm; dc:80.975 mm; P90°:62.3 kN; |
6397/2800GK1 Slewing Bearing | Fillet Radius ra:3.00 mm; Basic Static Radial Load Rating Co:415000 N; D:460.0000 mm; Sealed Speed Rating n3:700 rpm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:1100 rpm; Oil Speed Rating Open/Shielded n2:1400 rpm; d:340.000 mm; B:56.00 mm; Basic Dynamic Radial Load Rating C:281000 N; |
RU124 Cross Roller Bearings,RU124 Bearing SIZE80X165X22mm Video