| 1787/1640 Slewing Beairng | Height H:6.1250 in; Dimension A1:1.3438 in; Dimension L:3.6250 in; Weight W:2.85 lb; Height T:1.8438 in; Shaft Diameter D:1 1/4 in; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:5730 lbf; Dimension A2:0.5625 in; Diameter N:0.5625 in; |
| RE11020 Crossed Roller Bearings 110x160x20mm | w:80 mm; Mass rod end:10.5 kg; α:6 °; l5 ≈:40 mm; G:M 56x4; l3 min.:80 mm; d:70 mm; l7 min.:80 mm; B:49 mm; l4 max.:284 mm; |
| RU 66 Crossed Roller Bearing 35x95x15mm | B:67 mm; b1:6 mm; r1,2 min.:1.5 mm; D:150 mm; d:100 mm; Da max.:143 mm; Mass bearing:3.94 kg; d1 ≈:116 mm; Limiting speed:2600 r/min; r3,4 min.:1 mm; |
| MTO-265X Slewing Bearings(265x434x50mm) (10.433x17.086x1.968inch) Without Gear | Fillet Radius ra:0.30 mm; Basic Static Radial Load Rating Co:620 N; Oil Speed Rating Open/Shielded n2:54000 rpm; Sealed Speed Rating n3:31000 rpm; D:15.9000 mm; Grease Speed Rating Open/Shielded n1:44000 rpm; d:6.400 mm; Width Plain B:5.0 mm; Basic Dynamic Radial Load Rating C:1480 N; Accessories:Two Seals; |
| 134.40.1800 Slewing Beairng | db min.:34.6 mm; Basic static load rating C0:7.65 kN; ra max.:1 mm; r1,2 min.:1 mm; Basic dynamic load rating C:13.8 kN; Calculation factor f2D:1.08; Static axial stiffness, preload class A:79 N/µm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Static axial stiffness, preload class B:102 N/µm; Number of balls z:14; |
| RK6-43N1Z Heavy Duty Slewing Ring Bearing With Internal Gear | ba:74.612 mm; Eye bolt:2 x 3/8-16 UNC; R1:115.888 mm; Labyrinth ring:2 x LOR 159; RG:3/4 NPT; Initial grease fill:878.85 g; End plug (suffix Y):EPR 21; H:360.363 mm; Cap bolt recommended tightening torque:203.4 N·m; da:182.563 mm; |
| Komatsu PC150-7 Excavator Slewing Bearing | Cap bolt:1-8 UNC; Housing:SAFS 536; J min.:530.225 mm; ba:75.406 mm; A1:180.975 mm; Eye bolt:2 x 3/8-16 UNC; Max. speed for Taconite seal:460 r/min; L:679.45 mm; End plug (suffix Y):EPR 19; P150°:173 kN; |
| 011.60.2240 Slewing Bearing | d:160.000 mm; Basic Static Radial Load Rating Co:143000 N; D:240.0000 mm; B:38.00 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:1600 rpm; Basic Dynamic Radial Load Rating C:143000 N; Accessories:One Seal; Oil Speed Rating Open/Shielded n2:3000 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; |
| 012.75.3150 Slewing Bearing | A:8 mm; G:Tr 600x6; Locking device:MS 30/600-530; G3:13 mm; Lock nut:HM 30/600; d:600 mm; B:75 mm; d3:700 mm; Mass adapter sleeve assembly:133 kg; G2:G 1/8; |
| 12 mm x 28 mm x 8 mm Slewing Ring For Excavator KOBELCO SK120LC III, Part Number:24100N7529F1 | Basic Static Radial Load Rating Co:610000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:3.00 mm; D:280.0000 mm; B:116.00 mm; Oil Speed Rating n2:2000 rpm; d:130.000 mm; Grease Speed Rating n1:1500 rpm; Basic Dynamic Radial Load Rating C:449000 N; Size (mm):12 mm x 28 mm x 8 mm ; |