| No. | Brand | C | K | A | T | a | G | h | b |
| 1977 | Timken | - | - | - | - | - | - | - | - |
| 21%) | - | - | - | - | - | 6 mm | - | 202.5 mm | - |
| PE25-XL | INA | - | - | - | - | - | - | - | - |
| A2FO32 | Rexroth | - | - | - | - | - | - | - | - |
| ListingAT10123 | John Deere | - | - | - | - | - | - | 54.769 mm | - |
| YZ80T | NTN | - | - | - | - | - | - | - | - |
| PC120-6 | Komatsu | - | - | - | - | - | - | - | - |
| 41.63030 | Nachi | - | 7.5 mm | - | - | - | - | - | 13.9 mm |
| 4D95L | - | - | - | - | - | - | - | - | - |
| 1390 | - | - | - | - | - | - | M 75x2 | 3.5 mm | 8 mm |
| 3500W | - | - | - | - | - | - | - | - | - |
| GY6 | - | - | - | - | - | - | - | - | - |
| GM02 | - | - | - | - | - | - | - | - | - |
| 2RS | - | - | - | - | - | - | - | - | - |
| 6908-2RS | - | - | - | - | - | - | - | - | - |
| 2-SKF, | SKF | - | - | - | - | - | - | - | - |
| 6007-2NSE | Nachi | - | - | - | - | - | - | - | - |
| 8 | - | - | - | - | - | - | - | - | - |
| 650 | koyo | - | - | - | - | - | - | - | - |
| nh4cl | - | - | - | - | - | - | - | - | - |
| RE 4010 UU Crossed Roller Bearing 40x65x10mm | D:200.0000 mm; d:160.000 mm; Sealed Speed Rating n3:0 rpm; B:20.00 mm; Basic Static Radial Load Rating Co:60000 N; Grease Speed Rating Open/Shielded n1:2800 rpm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:49400 N; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:3400 rpm; |
| 231.20.0900.013 Four Contact Ball Slewing Ring 834x1046x56mm | C:27 mm; Static (Coa):203 kN; Dynamic (Ca):155 kN; rs (min):2 mm; r2s (min):0.6 mm; r1s (min):1.5 mm; D:125 mm; d2:70 mm; a:29 mm; T:33.25 mm; |
| 91-32 1355/1-06155 Four-point Contact Ball Slewing Bearing With External Gear | d1:1110 mm; Basic static load rating C0:45500 kN; Minimum axial load factor A:170; Da max.:895 mm; Mass bearing:580 kg; r1,2 min.:7.5 mm; ra max.:6 mm; Limiting speed:220 r/min; D:1120 mm; da min.:1075 mm; |
| HS6-43N1Z Slewing Bearings (39.13x47.18x2.2inch) With Internal Gear | Basic Dynamic Radial Load Rating C:127000 N; Fillet Radius rb:1.00 mm; d:65.000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5300 rpm; Grease Speed Rating n1:4500 rpm; B:37.00 mm; Basic Static Radial Load Rating Co:112000 N; D:160.0000 mm; |
| CRBA13025 Crossed Roller Bearing (130x190x25mm) Industrial Robots Use | d1:78 mm; D:78 mm; D1:52 mm; static Cor:111.000 kN; Pu:5.050 kN; Grease:2 800 min-1; rs (min):1 mm; d:50 mm; Oil:3 800 min-1; H:22 mm; |
| 9I-1B50-2070-1111 Four Point Contact Ball Slewing Ring | d:40.000 mm; B:15.00 mm; Grease Speed Rating Open/Shielded n1:9500 rpm; D:68.0000 mm; Sealed Speed Rating n3:6300 rpm; Basic Static Radial Load Rating Co:11600 N; Oil Speed Rating Open/Shielded n2:12000 rpm; Fillet Radius ra:1.00 mm; Accessories:Without Accessories; Basic Dynamic Radial Load Rating C:20800 N; |
| EC240 Slewing Bearing | Adapter sleeve assembly:SNW 124x4; Cap bolt recommended tightening torque:400 N·m; A1:120.65 mm; End plug (suffix Y):EPR 14; Cap bolt:2 x 1-8 UNC; Cap bolt, SAE grade:5; Labyrinth ring:2 x LOR 657; L:419.1 mm; P90°:111 kN; Pa:27.4 kN; |
| 232.20.0800.013 Slewing Ring With Flange 737.6x948x56mm | R2:37.306 mm; Ca:119.812 mm; P120°:85.9 kN; Stabilizing ring:SR-34-0; PG:1/4 NPT; Labyrinth ring:2 x LOR 139; Cap bolt:4 x 3/4-10 UNC; Mass pillow block:132 kg; S:4.763 mm; P150°:77 kN; |
| SX011820 Cross Roller Bearing 100x125x13mm | da min.:147 mm; D3:206 mm; Limiting speed:600 r/min; C1:83.2 mm; Snap ring in accordance with DIN 471:210x5; -:0.2 mm; Fatigue load limit Pu:127 kN; d1 ≈:167 mm; C:94 mm; |
| EXCAVATOR SLEWING RING, SWING BEARING, SWING CIRCLE FOR KOBELCO SK200-5 | Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:10000 rpm; d:17.000 mm; Accessories:Two Shields & Snap-R; Oil Speed Rating n2:15000 rpm; D:40.0000 mm; Basic Dynamic Radial Load Rating C:14300 N; Grease Speed Rating n1:10000 rpm; Basic Static Radial Load Rating Co:8800 N; B:17.5 mm; |
RU42 CROSSED ROLLER BEARINGS 20X70X12mm Video