| VU 140179 Four Point Contact Slewing Ring Slewing Bearing | l2 max.:349 mm; C1 max.:43 mm; B:49 mm; α:6 °; l1 min.:132 mm; h:265 mm; l7 min.:85 mm; r1 min.:1 mm; d:70 mm; Material constant KM:330; |
| 231.21.0675.013 Four Contact Ball Slewing Ring 535x742.8x56mm | Oil Speed Rating Open/Shielded n2:1800 rpm; Basic Dynamic Radial Load Rating C:291000 N; Basic Static Radial Load Rating Co:375000 N; Grease Speed Rating Open/Shielded n1:1500 rpm; Fillet Radius ra:3.00 mm; D:400.0000 mm; B:65.00 mm; Accessories:Two Shields & Snap-R; d:260.000 mm; Sealed Speed Rating n3:940 rpm; |
| 111.50.3150 Slewing Bearing | S:4.763 mm; Cap bolt:4 x 3/4-10 UNC; H:360.363 mm; Taconite seal:TER 140; Initial grease fill:878.85 g; Cap bolt recommended tightening torque:203.4 N·m; Mass pillow block:132 kg; P150°:77 kN; R2:37.306 mm; Housing:SAW 534; |
| RU124 Cross Roller Bearings,RU124 Bearing SIZE80X165X22mm | Initial grease fill, 20%:5.1 kg; P90°:3400 kN; ba max.:181 mm; N1:42 mm; Pa:1800 kN; Taconite seal:2 x TK 76; Da:520 mm; ATS:380 mm; P0°:5400 kN; s:23 mm; |
| VLU200644 Four Point Contact Slewing Ring Bearing | L:244.475 mm; Bearing limiting speed:8500 r/min; P150°:12 kN; R2:17.462 mm; Cap bolt, SAE grade:8; P90°:20.9 kN; RG:1/8 NPT; Housing:SAF 609; da:34.925 mm; A1:69.85 mm; |
| RA9008 Crossed Roller Bearing 90x106x8mm | Basic Dynamic Radial Load Rating C:15800 N; Sealed Speed Rating n3:7000 rpm; D:62.0000 mm; d:35.000 mm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:10200 N; B:14.00 mm; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating Open/Shielded n2:13000 rpm; Accessories:Without Accessories; |
| RE25040 Cross Roller Bearings,RE25040 Bearings SIZE 250x355x40mm | Bearing limiting speed:3800 r/min; Cap bolt, SAE grade:5; P90°:60.9 kN; H1:101.6 mm; Appropriate attachment bolt size G:0.625 in; J1:53.975 mm; ba:47.625 mm; H:192.484 mm; Mass pillow block:23.1 kg; da:77.787 mm; |
| 227-6087 Swing Bearing For Caterpillar 325CL Excavator | Initial grease fill:382.73 g; da:133.35 mm; R1:79.375 mm; ba:56.356 mm; Mass pillow block:67.6 kg; L:466.725 mm; RG:1/2 NPT; PG:1/4 NPT; P150°:68.1 kN; Cap bolt:2 x 1-8 UNC; |
| 9129521 Swing Bearing For HITACHI EX450LC-5 Excavator | D:160.0000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3400 rpm; d:90.000 mm; Sealed Speed Rating n3:2400 rpm; B:52.40 mm; Grease Speed Rating n1:2400 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:151000 N; Basic Static Radial Load Rating Co:193000 N; |
| 130.50.3550 Slewing Bearing | D1:82.22 mm; D:95 mm; B:18 mm; Calculation factor f0:8.5; Calculation factor f:1.08; Static axial stiffness, preload class A:48 N/µm; Calculation factor fHC:1; Preload class C GC:550 N; Static axial stiffness, preload class B:75 N/µm; r3,4 min.:0.6 mm; |