No. | Brand | C | K | A | T | a | G | h | b |
18mm | - | - | - | - | - | - | - | - | - |
APEX620-MO-25 | Parker | - | - | - | - | - | - | - | - |
P5A-131-V09-AE-08-44 | Parker | - | - | - | - | - | - | - | - |
10pcs | - | - | - | - | - | - | - | - | - |
D21 | INA | - | - | 60.325 mm | - | - | - | - | - |
A6VM140 | Rexroth | - | - | - | - | - | - | - | - |
75 | - | - | - | - | - | - | - | - | - |
16pc | - | - | - | - | - | - | - | - | - |
6SD1T | - | - | - | - | - | - | - | - | - |
x360 | - | - | - | - | - | - | - | - | - |
1969-1970 | Timken | - | - | - | - | - | - | - | - |
6000VV | Hitachi | - | 9 mm | - | - | - | - | - | 16.7 mm |
11mm | - | - | 12 mm | - | - | - | - | - | - |
6311 | - | - | - | - | - | - | - | - | - |
626 | - | 33 mm | - | - | 42.25 mm | 33 mm | - | - | - |
)BDZ-155 | - | - | - | - | - | - | - | - | - |
4/2 | - | - | - | - | - | - | - | - | - |
JSO-G02-2CP-20-N-419 | DAIKIN | - | - | - | - | - | 359.918 mm | - | - |
6008-2RZ | - | 13.5 mm | - | - | - | - | - | - | - |
23126 | NSK | - | - | - | - | - | - | - | - |
CB650SC | NTN | - | - | - | - | - | 279.502 mm | - | - |
18mm | - | - | - | - | - | - | - | - | - |
GE17 | - | - | - | - | - | - | - | - | - |
A11vlo40/75/95/130/145/190 | Rexroth | - | - | - | - | - | 39.7 mm | - | - |
RKS.23 0641 Slewing Bearing 534x748x56mm | d2:547 mm; ATS:470 mm; P90°:4600 kN; Appropriate attachment bolt, size G:42 mm; P0°:7600 kN; ATK:588 mm; Initial grease fill, 20%:10 kg; P150°:3000 kN; bb:202 mm; Q120°:5800 kN; |
787/1628G2 Slewing Bearing | Stabilizing ring:SR-16-13; RG:3/8 NPT; Lock nut:AN 16; Lock washer:W 16; H:174.625 mm; db:92.075 mm; P90°:82.7 kN; Labyrinth ring (dc shaft position):LOR 54; P60°:138 kN; Labyrinth ring (db shaft position):LOR 82; |
024.50.2240 Slewing Bearing | A2:155.575 mm; Cap bolt recommended tightening torque:203.4 N·m; R1:58.737 mm; R2:30.163 mm; P150°:46.3 kN; Housing:SAF 024 KA; P180°:55.6 kN; N1:25.4 mm; Cap bolt:2 x 3/4-10 UNC; L:387.35 mm; |
XU050077 Cross Roller Bearing Manufacturer 40x112x22mm | Tolerance housing:H7; D:10 mm; Coefficient of friction µ max.:0.1; Permissible sliding velocity v min.:0.25 m/s; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; Coefficient of friction µ min.:0.05; B:10 mm; Specific static load factor K0:20 N/mm²; Mass bushing:0.004 kg; |
133.40.1250 Slewing Bearing | P90°:249 kN; A1:190.5 mm; S:4.763 mm; P120°:151 kN; Max. speed for Taconite seal:440 r/min; ba:78.581 mm; P60°:416 kN; Housing:SSAFS 538; Initial grease fill:1672.65 g; Eye bolt:2 x 1/2-13 UNC; |
9166468 Swing Bearing For HITACHI EX300LC-5 Excavator | Da:250 mm; Cap bolt, SAE grade:8; R2:38.1 mm; P150°:105 kN; Eye bolt:2 x 3/8-16 UNC; P90°:180 kN; Initial grease fill:481.95 g; Stabilizing ring:SR-28-0; ba:61.119 mm; Adapter sleeve assembly:SNW 28x5; |
CRBS508AUUT1 High Precision Cross Roller Bearing | A1:120.65 mm; P150°:87.2 kN; P90°:149 kN; da:103.188 mm; Initial grease fill:379.89 g; Max. speed for Taconite seal:725 r/min; Housing:SSAFS 524; Mass pillow block:64 kg; h:46.831 mm; Cap bolt, SAE grade:8; |
A6-14E10 Four Point Contact Ball Slewing Bearing With External Gear | Basic Interchange SPLIT:-; Basic Interchange:-; Basic Interchange NDH:-; Basic Interchange NSK:-; Basic Interchange MCGILL:-; Basic Radial Load Rating-Dynamic DC:16400 lbf; Accessories:Chain Sheave Type- 3; Basic Radial Load Rating-Static SCO:62900 lbf; Basic Interchange BCA:-; |
W13-38P1 Four-point Contact Ball Slewing Rings | B:20.5 mm; r, r1,2 min.:0.3 mm; d:45 mm; Mass inner ring:0.059 kg; F:50 mm; |
NRXT4010E Crossed Roller Bearing 40x65x10mm | Type:300-RDM Series (from; d:130.000 mm; Fillet Radius ra:3.00 mm; B:58.00 mm; Basic Radial Load Rating-Static SCO:345000 N; Basic Radial Load Rating-Dynamic DC:296000 N; D:280.0000 mm; Speed Rating-Open and Shielded-Grease OSG:5300 rpm; Fillet Radius rb:1.00 mm; Speed Rating-Open and Shielded-Oil OSO:7800 rpm; |
NRXT8016E Crossed Roller Bearing 80x120x16mm Video