| No. | Brand | C | K | A | T | a | G | h | b |
| 46% | - | - | - | - | - | - | - | - | - |
| 6K | Parker | - | - | - | - | - | - | - | - |
| NJ2306 | NSK | - | - | - | - | - | - | - | - |
| R210-7 | - | - | - | - | - | - | - | - | - |
| 6816 | NTN | - | - | - | - | - | - | - | - |
| PC300-7 | - | - | - | - | - | - | - | - | - |
| 22313K | Rollway | - | - | - | - | - | - | - | - |
| 85cm | - | - | - | - | - | - | 529.006 mm | - | - |
| 1973-up | - | - | - | - | - | - | - | - | 4.2 mm |
| 400 | - | - | - | - | - | - | M 170x3 | - | - |
| 3500W | - | - | - | - | - | - | - | - | - |
| 33117 | Timken | - | - | - | - | - | - | - | - |
| 4WEH22HA70/6AW120-60 | Rexroth | - | - | - | - | - | - | 20 mm | 45 mm |
| 6305 | NSK | - | - | - | - | - | - | - | - |
| NJ348MA | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| 35X72X23X19 | - | - | - | - | - | - | - | - | - |
| 62212-2RS1 | SKF | - | 4 mm | - | - | - | - | - | - |
| 6220-5, | - | - | 12 mm | - | - | - | - | - | - |
| 99% | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 12-15 | - | - | - | - | 342.9 mm | - | - | - | - |
| Z250 | NTN | - | - | - | - | - | - | 28.575 mm | - |
| 16pc | - | - | - | - | - | - | - | - | - |
| KOBELCO SK60 EXCAVATOR SLEWING RING, SWING BEARING, SWING CIRCLE | ra max.:8 mm; D1 ≈:1111 mm; b:22.3 mm; Da max.:1240 mm; G:Tr 850x7; Basic dynamic load rating C:21587 kN; Calculation factor Y0:1.8; B2 ≈:553 mm; r1,2 min.:9.5 mm; Fatigue load limit Pu:2320 kN; |
| 30 mm x 42 mm x 7 mm CRBB 15025 Rodamientos Especiales De Rodillos Cruzados 150*210*25mm | Accessories:Two Seals; Fillet Radius ra:1.00 mm; D:85.0000 mm; Basic Static Radial Load Rating Co:14300 N; Basic Dynamic Radial Load Rating C:16500 N; Grease Speed Rating Open/Shielded n1:7500 rpm; Sealed Speed Rating n3:4500 rpm; Oil Speed Rating Open/Shielded n2:9000 rpm; d:60.000 mm; B:13.00 mm; Size (mm):30 mm x 42 mm x 7 mm ; |
| RE 20025 UU Crossed Roller Bearing 200x260x25mm | B:18 mm; d:190 mm; Mass shaft washer:4.06 kg; d1:267 mm; r1,2 min.:2 mm; |
| RB90070 Cross Roller Bearing 900x1050x70mm | Oil:115.350 kN; d:170 mm; Static (Cor):11.1 mm; Dynamic (Cr):6 mm; Grease:1190 kN; with cylindrical bore:1 600 min-1; D:260 mm; with tapered bore:2 000 min-1; rs (min):2.1 mm; B:67 mm; |
| 17 mm x 40 mm x 12 mm VSU250755 Slewing Bearing / Four Point Contact Bearing 655*855*63mm | rs (min):4 mm; D:300 mm; Dynamic (Cr):7.5 mm; d:140 mm; Static (Cor):13.9 mm; Pu:993 kN; with tapered bore:1 500 min-1; Oil:122.250 kN; Grease:1270 kN; with cylindrical bore:1 200 min-1; Size (mm):17 mm x 40 mm x 12 mm ; |
| VLU200644 Four Point Contact Slewing Ring Bearing | L:244.475 mm; Bearing limiting speed:8500 r/min; P150°:12 kN; R2:17.462 mm; Cap bolt, SAE grade:8; P90°:20.9 kN; RG:1/8 NPT; Housing:SAF 609; da:34.925 mm; A1:69.85 mm; |
| NRXT15030 Crossed Roller Bearing 150x230x30mm | d:110 mm; B:7 mm; Mass universal washer:0.39 kg; D:145 mm; r1 min.:1 mm; |
| RB13025UUC0 High Precision Cross Roller Ring Bearing | P90°:72.5 kN; h:38.1 mm; Max. speed for Taconite seal:950 r/min; J max.:298.45 mm; Cap bolt:2 x 5/8-11 UNC; Da:160 mm; PG:1/8 NPT; Mass pillow block:21.3 kg; Initial grease fill:286.33 g; Cap bolt recommended tightening torque:149.1 N·m; |
| RE 20025 Crossed Roller Bearing 200x260x25mm | D:440 mm; D1:325 mm; Da max.:348 mm; Minimum axial load factor A:4.147; H:95 mm; Fatigue load limit Pu:530 kN; Mass bearing:42.5 kg; ra max.:2.5 mm; B:28.5 mm; Basic static load rating C0:7200 kN; |
| CSG(CSF)-65 Cross Roller Bearing, Harmonic Drive Bearing, Harmonic Reducer Bearing, Robot Bearing | Limiting speed:70000 r/min; Da max.:8 mm; da max.:4.3 mm; Calculation factor f0:6.4; ra max.:0.15 mm; d:3 mm; da min.:3.9 mm; Basic dynamic load rating C:0.325 kN; D:9 mm; Calculation factor kr:0.03; |
Slewing Rings & Turntable Bearings - Motion
Results 1 - 12 of 112 — Slewing rings and turntable bearings accommodate axial, radial, and moment loads. They mount directly onto a seating surface and do not ...
Slewing ring bearings, turntable bearings – FH Slewing ...
We do None gear, Internal & External gears, ring gears, rings, slewing ring bearings and other forging parts for different fields. To save your significant ...
Slew / Turntable Bearings | Ball-Bearing Slewing Rings
The Slew / Turntable Bearings from Isotech are characterized by their large diameter and large bores with only a small cross-section.
Slewing bearings | SKF
Slewing bearings comprise an inner ring and an outer ring, one of which usually incorporates a gear. Together with attachment holes in both rings, ...
Slewing Rings - National Precision Bearing
We have drive motor & pinion packages, as well as turntable solutions. Types: Rectangular, flanged, high capacity, cross roller. Configurations: Geared ( ...
Slewing Rings (Turntable Bearings) Components - Silverthin
Slewing ring bearings are comprised of two rings, each of which contains a precision raceway that is induction hardened on the surface to a specified depth.
Messinger Slewing Ring Bearing
Messinger slewing ring bearings are robustly designed and precisely manufactured to support extreme axial, radial, and tilting moment loading in a single ...
- The Latest in Slewing Ring Bearing Technology - Igus
iglide® PRT slewing ring bearings are ready-to-install rotary joints for self-lubricating, dry operation. The design is based on maintenance-free sliding ...Oct 25, 2013 · Uploaded by igus, Inc.
Slewing ring bearings, turntable bearings | Kaydon Bearings
HS series pre-engineered, light profile slewing rings feature rectangular cross sections, which allow for alternate hole patterns, improved stiffness, and the ...
Slewing Ring Bearings
Slewing ring bearings, or turntable bearings, are ball or roller style bearings composed of two concentric rings either of which may include a gear. This type ...
NRXT15025E Crossed Roller Bearing 150x210x25mm Video