| RB13015UU High Precision Cross Roller Ring Bearing | Basic Dynamic Radial Load Rating C:325000 N; d:105.000 mm; D:225.0000 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1800 rpm; Oil Speed Rating n2:2600 rpm; Fillet Radius ra:2.50 mm; B:98.00 mm; Basic Static Radial Load Rating Co:390000 N; |
| 022.50.2500 Slewing Bearing | B:41.00 mm; Grease Speed Rating n1:3600 rpm; Grease Speed Rating Open/Shielded n1:3600 rpm; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:2400 rpm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:133000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; d:85.000 mm; |
| Komatsu PC300HD-6MH Excavator Part Number 207-25-61100 Swing Bearing | Cap bolt:5/8-11 UNC; P120°:66.7 kN; Bearing:23026 CCK/W33; A2:231.775 mm; Adapter sleeve assembly:SNW 3026x4.5/16; H1:125.425 mm; PG:1/4 NPT; Housing:SAFS 026 KA; End plug (suffix Y):EPR 15; P90°:107 kN; |
| VI 140326-V Four Point Contact Slewing Ring Slewing Bearing | Number of pulses per revolution N:64; Period accuracy ±:8 %; Duty cycle tolerance ±:10 %; Limiting speed:300 r/min; Phase shift output signal:90 °; Mass sensor unit:0.58 kg; Cable connector type:AMP Superseal; Phase shift output signal tolerance ±:30 °; Duty cycle:50 %; |
| 232.20.0600.013 Slewing Ring With Flange 547.2x748x56mm | Basic static load rating C0:72 kN; Fatigue load limit Pu:2.7 kN; Static axial stiffness, preload class D:361 N/µm; Calculation factor f0:16.5; Ball diameter Dw:12.7 mm; r3,4 min.:0.6 mm; D:150 mm; Mass bearing:0.73 kg; b:2.3 mm; db min.:116 mm; |
| CRB30025UUT1 High Precision Cross Roller Ring Bearing | Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; d:80.000 mm; Basic Dynamic Radial Load Rating C:128000 N; B:44.40 mm; Basic Static Radial Load Rating Co:160000 N; D:140.0000 mm; Grease Speed Rating n1:2800 rpm; Accessories:Shield & Seal; |
| DH200-3 Slewing Bearing | d1:152.4 mm; B:33 mm; Lock nut:KMFE 34; d3:220 mm; B1:101 mm; Mass adapter sleeve assembly:5.5 kg; G:M 170x3; d:170 mm; Hydraulic nut:HMV 34 E; |
| RE 50025 Crossed Roller Bearing 500x550x25mm | H1:250.825 mm; R1:163.512 mm; Bearing:23056 CCK/W33; Eye bolt:2 x 1/2-13 UNC; H:495.3 mm; Cap bolt recommended tightening torque:4284.4 N·m; J max.:749.3 mm; h:73.025 mm; P120°:249 kN; L:869.95 mm; |
| Slewing Ring For Excavator KOBELCO SK220LC IV, Part Number:24100N7441F1 | Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1800 rpm; Basic Static Radial Load Rating Co:640000 N; Basic Dynamic Radial Load Rating C:390000 N; D:310.0000 mm; Fillet Radius ra:2.00 mm; B:102.00 mm; Grease Speed Rating n1:1400 rpm; d:200.000 mm; |
| 281.30.1100.013 Four Contact Ball Slewing Ring 1005x1298x90mm | B1:82 mm; d1:127 mm; d:140 mm; B:28 mm; G:M 140x2; Lock nut:KMFE 28; Mass adapter sleeve assembly:2.8 kg; Hydraulic nut:HMV 28 E; d3:180 mm; |