| No. | Brand | C | K | A | T | a | G | h | b |
| 9168173 | - | - | - | - | - | - | - | - | - |
| 100% | - | 17.5 mm | - | - | 23 mm | 21 mm | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| 18mm/21mm | - | - | - | - | - | - | - | - | - |
| 3212 | SKF | - | - | - | - | - | - | - | - |
| 10x | - | - | - | - | - | - | - | - | - |
| C3 | - | - | - | - | - | - | - | - | - |
| 2-1/2 | - | 153 mm | - | - | - | - | - | - | - |
| 400 | fag | - | - | - | - | - | - | 39.688 mm | - |
| MA-1205-EL | Bower | 26 mm | - | - | - | - | - | - | - |
| PC130-8M0 | - | - | 5 mm | - | - | - | - | - | - |
| 2-25mm | - | - | - | - | - | 35 mm | - | - | - |
| 3-NSK-bearing | NSK | - | - | - | - | - | - | - | - |
| 5~6 | - | - | - | - | - | - | - | - | - |
| 6301-2RS | fag | - | - | - | - | - | M 52x3 | 195 mm | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 2213K | - | - | - | - | - | - | - | - | - |
| ISO4706 | - | - | - | - | - | - | - | - | - |
| 5mm/0.5mm | - | - | - | - | - | - | - | - | - |
| D3 | INA | - | - | - | - | - | - | - | - |
| 6005 | - | - | - | - | - | - | - | - | - |
| 2520V21A12 | - | - | - | - | - | - | - | - | - |
| 18mm, | - | - | - | - | - | - | - | 54.769 mm | - |
| 25x8-12 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| CLG925D | - | - | - | - | - | - | M 160x3 | - | - |
| 5 | - | 121 mm | 4 mm | - | - | - | - | - | - |
| 10Pcs | - | - | - | - | - | - | - | - | - |
| 6305-ZZD-C3 | - | - | - | - | - | - | - | - | - |
| CBT-F308FRP/B/H | - | - | - | - | - | - | - | - | - |
| RE8016 Cross Roller Bearing 80x120x16mm | |
| Slewing Bearing For Komatsu PC350 Excavator | Preload class B GB:440 N; Calculation factor e:0.68; Db max.:90.8 mm; D:95 mm; Da max.:89 mm; Number of balls z:25; D1:82.22 mm; db min.:66 mm; rb max.:0.6 mm; Calculation factor (single, tandem) Y2:0.87; |
| XSA140744-N Crossed Roller Bearings 674x838.1x56mm | Fatigue load limit Pu:530 kN; ra max.:5 mm; D:650 mm; Basic static load rating C0:7650 kN; D1 ≈:566 mm; B1:240 mm; Calculation factor Y0:2.5; B:200 mm; Mass bearing + sleeve:290 kg; Reference speed:530 r/min; |
| R225-7 Bearings | B2:80 mm; Basic dynamic load rating C:7919 kN; Calculation factor Y1:3.2; b:22.3 mm; da max.:772 mm; K:12 mm; d2 ≈:772 mm; B:230 mm; D1 ≈:892 mm; Reference speed:340 r/min; |
| RA20013 RA20013UUC0 High Precision Cross Roller Bearing | rs (min):1.5 mm; Dynamic (Ca):43.8 kN; B:21 mm; T:22.25 mm; r1s (min):1.5 mm; Static (Coa):45.5 kN; D:52 mm; C:18 mm; d2:20 mm; Pu:5.550 kN; |
| XV40 Table/slewing Bearing 40x85x14mm | h:15.342 mm; d1:527.05 mm; B:60.579 mm; Threads per inch:5; Mass lock nut:30.4 kg; Locking device:PL 96; B5:74.6 mm; Associated spanner:TMFN 80-500; b:37.592 mm; d3 max.:560.527 mm; |
| 133.50.4000 Slewing Bearing | Sealed Speed Rating n3:8000 rpm; Basic Static Radial Load Rating Co:8300 N; Accessories:Two Seals & Snap-Rin; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:15000 rpm; B:13.00 mm; d:30.000 mm; D:55.0000 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Dynamic Radial Load Rating C:13300 N; |
| 9E-1B35-1180-0813 Four Point Contact Ball Slewing Ring | r1,2 min.:12 mm; Basic static load rating C0:14600 kN; Fatigue load limit Pu:1270 kN; D:600 mm; r3,4 min.:3 mm; Basic dynamic load rating C:5500 kN; B:368 mm; Calculation factor kr:500; K:9 mm; F:504 mm; |
| 24100N7441F1 Swing Bearing For KOBELCO SK220LC IV Excavator | L:831.85 mm; Cap bolt recommended tightening torque:4284.4 N·m; J1:133.35 mm; Pa:81.4 kN; Housing:SAFS 052 KA; Ca:117.805 mm; P180°:285 kN; P150°:236 kN; A1:222.25 mm; H2:95.25 mm; |
| 91-20 0841/1-07153 Four-point Contact Ball Slewing Bearing With External Gear | Hydraulic nut:HMVC 44E; B:32.004 mm; B1:149.631 mm; d1:203.2 mm; Lock nut:N 044; d3 max.:260.477 mm; d:220 mm; G:219.151 mm; Sleeve:S 44x8; B4:34.925 mm; |
NRXT30035 Crossed Roller Bearing 300x395x35mm Video